Description
identifying and describing how specific system used in an organization has transformed how the organization operates
Write a 700- to 1,050-word paper identifying and describing how specific system used in an organization has transformed how the organization operates.
Discuss how the business requirements drove the system's initial development.
Describe the type and basic uses of the system, how the system has helped the organization, and any likely future development plans.
This system must be used in your current place of work.
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.
Explanation & Answer
Review
Review
Anonymous
Just what I was looking for! Super helpful.
Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4
24/7 Homework Help
Stuck on a homework question? Our verified tutors can answer all questions, from basic math to advanced rocket science!
Most Popular Content
short paper 7
WEEK - PATCH MANAGEMENT STRATEGY RESEARCH PAPERThis research paper will focus on issues and concerns with Patch Management ...
short paper 7
WEEK - PATCH MANAGEMENT STRATEGY RESEARCH PAPERThis research paper will focus on issues and concerns with Patch Management. With the advent of many types of software and systems, patch management is major nightmare. Patching the system may cause the system to crash, and not patching it can leave it vulnerable to attacks. Please research the issues and concerns with patch management and provide your views on the topic. Please consider this at an enterprise level where the complexity is increased exponentially with the increase in the number of systems.Paper Requirements:APA FormatNumber of Pages: Minimum of 3 Pages not including Cover, Table of Contents and References.Safe – Assignment comparison will be donePatch Management methodology white paper in the SANS reading rooms would serve as a good start for your research.
Tool Comparison Presentation, computer science homework help
Tool Comparison PresentationAt this point, you have been introduced to various security tools (Network Discovery, Network ...
Tool Comparison Presentation, computer science homework help
Tool Comparison PresentationAt this point, you have been introduced to various security tools (Network Discovery, Network Scanning, DLP, Firewalls, and HIDS). You are to take one of the five identified categories of tools and identify two specific products from different vendors. Based on two products, please research the differences and similarities between the two products. You should also evaluate the implementation issues you may face with each product. Based on your research, please create a PowerPoint or a similar presentation to explain your research and your findings of the tools. The presentation should be comparative in nature as to highlight the similarities between the two products you researched. Need 15 to 17 slides.The presentation must contain the following:Product BackgroundPros and Cons of each productSide by Side comparisonRecommendationPowerPoint RequirementsEasy to follow and understandRatio of words to background (Essentially, not too many words on a slide. Highlight the essentials)Graphics – Charts, Graphs, Illustrations, etc.15 – 17 slidesNo Plagiarism
CITC 1303 Nashville State Community College Module 3 Maintaining a Database Project
1. Open the Client table in Design view. 2. Add a Lookup field called Client Type to the Client table. The field should be ...
CITC 1303 Nashville State Community College Module 3 Maintaining a Database Project
1. Open the Client table in Design view. 2. Add a Lookup field called Client Type to the Client table. The field should be inserted after the Advisor Number field. The field will contain data on the type of client. The client types are TRT (trust), INV (invest), and RET (retirement). Save the changes to the Client table.
3. Create the following validation rules for the Client table. a. Specify the legal values TRT, INV, and RET for the Client Type field. Enter Must be TRT, INV, or RET as the validation text. b. Make the Client Name field a required field.
4. Save the changes and close the table. You do not need to test the current data. 5. Create an update query for the Client table. Change all the entries in the Client Type field to INV. Run the query and save it as Client Type Update Query.
6. Open the Client table in Datasheet view, update the following records, and then close the table: a. Change the client type for clients BB35, CC25, CJ45, and CP03 to RET. b. Change the client type for clients MM01 and PS67 to TRT.
7. Create a split form for the Client table. Save the form as Client Split Form. 8. Open the Client Split Form in Form view, find client HN23, and change the client name from Henry Niemer to Henry Neimer. Close the form.
9. Establish referential integrity between the Advisor table (the one table) and the Client table (the many table). Cascade the update but not the delete. Save the relationship.
10. If requested to do so by your instructor, rename the Client Split Form as Split Form for First Name Last Name where First Name Last Name is your name.
11. Submit the revised database in the format specified by your instructor. 12.
The values in the Client Type field are currently in the order TRT, INV, and RET. How would you reorder the values to INV, RET, and TRT in the Client Type list?
Harrisburg University of Science and Technology Network Security Plan Paper
PROJECT PART 2: NETWORK DESIGNINTRODUCTIONAs discussed so far in this course, the configuration of a network affects the o ...
Harrisburg University of Science and Technology Network Security Plan Paper
PROJECT PART 2: NETWORK DESIGNINTRODUCTIONAs discussed so far in this course, the configuration of a network affects the options available for security and network defense. Using the network survey produced during the first part of this project, together with host vulnerability assessments and access requirements, you need to design an updated network structure.SCENARIOYou have been working as a technology associate the information systems department at Corporation Techs for a while now. You have discovered so far that all of Corporation Techs’ computer systems share the same Class C public IP address range, including workstations along with servers providing authentication, e-mail, and both secure and public Web sites.Your next task in this project is to construct a basic network design. An important requirement for the network design is to reduce the number of public addresses needed as the subnet lease results in very high ISP costs.TASKSConstruct a basic network design, separating private and public services within the Corporation Techs’ network. To do so, you must:Access the PCAP files using NetWitness Investigator, and browse the Nmap scan (XML format), topology fisheye chart (PDF format), and Nessus report (HTML format).Identify vulnerabilities and clear-text information transfer.Conduct research and determine the best network design to ensure security of internal access while retaining public Web site availability.Identify any opportunities for reduced ISP costs through port redirection or address translation.Design a network configuration, identifying network gateways, port or address redirection systems, and the location of hosts within private and protected network segments.Create a professional report detailing the information above as supportive documentation for the network security plan.Create a report that includes a basic network diagram and research results.FINAL PROJECT: NETWORK SECURITY PLANSCENARIOYou have been working as a technology associate in the information systems department at Corporation Techs for three months now. You have conducted a network survey and developed a basic network design intended to provide security for private network resources and publically exposed Web services.Your manager specified that all information transferred between the sales team in the field and the organizational servers must be protected against snooping. The manager also wants the secured reporting site to be available only through the organization's private network so that an outsourced network-based intrusion detection system (NIDS) service can log all connections.TasksYou need to recommend a network design and identify hardening strategies intended to meet the requirements. To do so, you must:Access the PCAP and other scan data for this project.Conduct research and determine the best network design to meet the stated requirements.Research hardening strategies and identify recommended mitigation strategies for identified vulnerabilities.Identify mechanisms for secure network access by remote users, both in terms of secure Web access as well as reporting access conducted using the private network.Develop a network security plan including network realignment, hardening practices, and policies for remote resource access.Identify expectations from recommended changes and provide justification for each recommendation in simple language so that primary stakeholders are able to understand it.Create a professional report detailing the information above, presented as a recommendation for a network security realignment project for Corporation Techs. Include persuasive justification and measurable expectations as part of this recommendation.Write the network design results as detailed in the instructions above. Your plan should be made using a standard word processor format compatible with Microsoft Word.EVALUATION CRITERIA AND RUBRICS Evaluation ParametersPercentage WeightDid the student demonstrate an understanding of the competencies covered to date for Part II?15% = 90 ptsDid the student identify all vulnerabilities identified in the packet trace and host vulnerability scans?15% = 90 ptsDid the student produce a network design that will fulfill the stated requirements, separating private network resources and protected DMZ bastion hosts?20% = 120 ptsDid the student demonstrate an understanding of the competencies covered in this course?15% = 90 ptsDid the student produce a network design that will fulfill the stated requirements, including VPN and SSL access?10% = 60 ptsDid the student identify effective network hardening strategies for identified vulnerabilities?10% = 60 ptsDid the student provide a persuasive justification and measurable expectations for the recommended changes?10% = 60 ptsDid the student create a professional, well-developed report with proper grammar, spelling, and punctuation?5% = 30 ptsTotal100% = 600pts
7 pages
University Database Design
A database design starts with a requirements analysis process through which the database uses are determined. It involves ...
University Database Design
A database design starts with a requirements analysis process through which the database uses are determined. It involves studying and analyzing ...
Similar Content
A T Still University Cyber Domains Frameworks and Law Questions
Part 1 is to fill in the attached PowerPoint with Frameworks that match (such as NIST or ISO).
Part 2 is to describ...
answer questions
you have to choose 9 questions from the list and answer it : Online Support for PrintersList five possible sources for su...
electronic Subassembly Simulation and Modeling in Excel Project
The time to failure on an electronic subassembly can be modeled by Weibull distribution whose location parameter is zero, ...
Ethics in Information Technology Discussion 5 help
Businesses have increasingly relied upon networks of computers and the rapid pace of technological presents a challenge in...
Analyze algorithm and its runtime, computer science homework help
Hi. Can you answer all of the 3 questions listed in the attached file and explain the answers you will provide?...
SEC 402 Strayer University Functional Security Support Roles Discussion
Imagine
you are the CIO of an organization. Lay out what you believe are your
key responsibilities and how you would a...
Physical Security
Physical barriers are designed to prevent the physical penetration of a secure facility by an intruder. Physical barriers ...
Untitled Document.edited 62
The task performed by a system analyst in an organization is to examine the system hardware and software. Then, they relat...
Mckinsey.edited
1) Major points of the McKinsey “Connected World” executive summary? There is a high expansion of the existing connect...
Related Tags
Book Guides
The Adventures of Huckleberry Finn
by Mark Twain
Killers of the Flower Moon
by David Grann
The Tipping Point
by Malcolm Gladwell
The Kite Runner
by Khaled Hosseini
Daisy Miller
by Henry James
The Sixth Extinction An Unnatural History
by Elizabeth Kolbert
The Hobbit
by J. R. R. Tolkien
The Outsiders
by S.E. Hinton
Robinson Crusoe
by Daniel Defoe
Get 24/7
Homework help
Our tutors provide high quality explanations & answers.
Post question
Most Popular Content
short paper 7
WEEK - PATCH MANAGEMENT STRATEGY RESEARCH PAPERThis research paper will focus on issues and concerns with Patch Management ...
short paper 7
WEEK - PATCH MANAGEMENT STRATEGY RESEARCH PAPERThis research paper will focus on issues and concerns with Patch Management. With the advent of many types of software and systems, patch management is major nightmare. Patching the system may cause the system to crash, and not patching it can leave it vulnerable to attacks. Please research the issues and concerns with patch management and provide your views on the topic. Please consider this at an enterprise level where the complexity is increased exponentially with the increase in the number of systems.Paper Requirements:APA FormatNumber of Pages: Minimum of 3 Pages not including Cover, Table of Contents and References.Safe – Assignment comparison will be donePatch Management methodology white paper in the SANS reading rooms would serve as a good start for your research.
Tool Comparison Presentation, computer science homework help
Tool Comparison PresentationAt this point, you have been introduced to various security tools (Network Discovery, Network ...
Tool Comparison Presentation, computer science homework help
Tool Comparison PresentationAt this point, you have been introduced to various security tools (Network Discovery, Network Scanning, DLP, Firewalls, and HIDS). You are to take one of the five identified categories of tools and identify two specific products from different vendors. Based on two products, please research the differences and similarities between the two products. You should also evaluate the implementation issues you may face with each product. Based on your research, please create a PowerPoint or a similar presentation to explain your research and your findings of the tools. The presentation should be comparative in nature as to highlight the similarities between the two products you researched. Need 15 to 17 slides.The presentation must contain the following:Product BackgroundPros and Cons of each productSide by Side comparisonRecommendationPowerPoint RequirementsEasy to follow and understandRatio of words to background (Essentially, not too many words on a slide. Highlight the essentials)Graphics – Charts, Graphs, Illustrations, etc.15 – 17 slidesNo Plagiarism
CITC 1303 Nashville State Community College Module 3 Maintaining a Database Project
1. Open the Client table in Design view. 2. Add a Lookup field called Client Type to the Client table. The field should be ...
CITC 1303 Nashville State Community College Module 3 Maintaining a Database Project
1. Open the Client table in Design view. 2. Add a Lookup field called Client Type to the Client table. The field should be inserted after the Advisor Number field. The field will contain data on the type of client. The client types are TRT (trust), INV (invest), and RET (retirement). Save the changes to the Client table.
3. Create the following validation rules for the Client table. a. Specify the legal values TRT, INV, and RET for the Client Type field. Enter Must be TRT, INV, or RET as the validation text. b. Make the Client Name field a required field.
4. Save the changes and close the table. You do not need to test the current data. 5. Create an update query for the Client table. Change all the entries in the Client Type field to INV. Run the query and save it as Client Type Update Query.
6. Open the Client table in Datasheet view, update the following records, and then close the table: a. Change the client type for clients BB35, CC25, CJ45, and CP03 to RET. b. Change the client type for clients MM01 and PS67 to TRT.
7. Create a split form for the Client table. Save the form as Client Split Form. 8. Open the Client Split Form in Form view, find client HN23, and change the client name from Henry Niemer to Henry Neimer. Close the form.
9. Establish referential integrity between the Advisor table (the one table) and the Client table (the many table). Cascade the update but not the delete. Save the relationship.
10. If requested to do so by your instructor, rename the Client Split Form as Split Form for First Name Last Name where First Name Last Name is your name.
11. Submit the revised database in the format specified by your instructor. 12.
The values in the Client Type field are currently in the order TRT, INV, and RET. How would you reorder the values to INV, RET, and TRT in the Client Type list?
Harrisburg University of Science and Technology Network Security Plan Paper
PROJECT PART 2: NETWORK DESIGNINTRODUCTIONAs discussed so far in this course, the configuration of a network affects the o ...
Harrisburg University of Science and Technology Network Security Plan Paper
PROJECT PART 2: NETWORK DESIGNINTRODUCTIONAs discussed so far in this course, the configuration of a network affects the options available for security and network defense. Using the network survey produced during the first part of this project, together with host vulnerability assessments and access requirements, you need to design an updated network structure.SCENARIOYou have been working as a technology associate the information systems department at Corporation Techs for a while now. You have discovered so far that all of Corporation Techs’ computer systems share the same Class C public IP address range, including workstations along with servers providing authentication, e-mail, and both secure and public Web sites.Your next task in this project is to construct a basic network design. An important requirement for the network design is to reduce the number of public addresses needed as the subnet lease results in very high ISP costs.TASKSConstruct a basic network design, separating private and public services within the Corporation Techs’ network. To do so, you must:Access the PCAP files using NetWitness Investigator, and browse the Nmap scan (XML format), topology fisheye chart (PDF format), and Nessus report (HTML format).Identify vulnerabilities and clear-text information transfer.Conduct research and determine the best network design to ensure security of internal access while retaining public Web site availability.Identify any opportunities for reduced ISP costs through port redirection or address translation.Design a network configuration, identifying network gateways, port or address redirection systems, and the location of hosts within private and protected network segments.Create a professional report detailing the information above as supportive documentation for the network security plan.Create a report that includes a basic network diagram and research results.FINAL PROJECT: NETWORK SECURITY PLANSCENARIOYou have been working as a technology associate in the information systems department at Corporation Techs for three months now. You have conducted a network survey and developed a basic network design intended to provide security for private network resources and publically exposed Web services.Your manager specified that all information transferred between the sales team in the field and the organizational servers must be protected against snooping. The manager also wants the secured reporting site to be available only through the organization's private network so that an outsourced network-based intrusion detection system (NIDS) service can log all connections.TasksYou need to recommend a network design and identify hardening strategies intended to meet the requirements. To do so, you must:Access the PCAP and other scan data for this project.Conduct research and determine the best network design to meet the stated requirements.Research hardening strategies and identify recommended mitigation strategies for identified vulnerabilities.Identify mechanisms for secure network access by remote users, both in terms of secure Web access as well as reporting access conducted using the private network.Develop a network security plan including network realignment, hardening practices, and policies for remote resource access.Identify expectations from recommended changes and provide justification for each recommendation in simple language so that primary stakeholders are able to understand it.Create a professional report detailing the information above, presented as a recommendation for a network security realignment project for Corporation Techs. Include persuasive justification and measurable expectations as part of this recommendation.Write the network design results as detailed in the instructions above. Your plan should be made using a standard word processor format compatible with Microsoft Word.EVALUATION CRITERIA AND RUBRICS Evaluation ParametersPercentage WeightDid the student demonstrate an understanding of the competencies covered to date for Part II?15% = 90 ptsDid the student identify all vulnerabilities identified in the packet trace and host vulnerability scans?15% = 90 ptsDid the student produce a network design that will fulfill the stated requirements, separating private network resources and protected DMZ bastion hosts?20% = 120 ptsDid the student demonstrate an understanding of the competencies covered in this course?15% = 90 ptsDid the student produce a network design that will fulfill the stated requirements, including VPN and SSL access?10% = 60 ptsDid the student identify effective network hardening strategies for identified vulnerabilities?10% = 60 ptsDid the student provide a persuasive justification and measurable expectations for the recommended changes?10% = 60 ptsDid the student create a professional, well-developed report with proper grammar, spelling, and punctuation?5% = 30 ptsTotal100% = 600pts
7 pages
University Database Design
A database design starts with a requirements analysis process through which the database uses are determined. It involves ...
University Database Design
A database design starts with a requirements analysis process through which the database uses are determined. It involves studying and analyzing ...
Earn money selling
your Study Documents