Writing
Ii need a person to help me put my paper into ieee format and add pics I have already written paper

Question Description

SO ARE YOUU CLEAR WE ARE DOING THE SAME THING LIKE LAST PAPER IEEE FORMAT, PICS, AND, WHAT EACH COMPONENT DOES AND WHY ITS IMPORTANT AND A LIST OF PARTS USED.....ONLY THING THAT DIFFERS IS THERE ARE DIFFERENT CATEGORIES

Unformatted Attachment Preview

In this section of the PC Build Manual Part 2, the following areas will be covered 1. Installing Hard Drive 2. Installing Optical Drive 3.Installing Video Card 4.Connecting Monitors, Keyboard, and Mouse 5.BIOS Configuration In this section of Manual Part 2, Installing a Hard Drive will be Covered. It is important that the reader follow all directions, to ensure a properly installed Hard Drive. Adding a new Hard Drive will allow you to store more data on your computer and its simple to complete. 1. Ground Yourself with an anti-static wrist band so you don’t fry your hard drive or motherboard 2. Remove your new hard drive from its packaging 3. Make sure the side cover is removed from the CPU 4. Find a convenient space on the inside of the tower to mount your hard drive 5. Use the necessary screws to securely fasten the hard drive into the holes one the CPU tower 6. Then connect the power cable to the hard drive in its designated port located on the Hard Drive 7. Connect the SATA cable to the other open port located on hard drive it should be in the shape of a L. 8. Once all above steps are completed fasten the side panel back on to the tower and plug in computer to a power. 9. Power your computer on go to My Computer located in your start menu to make sure the hard drive is shown and properly installed This Image Displays the CPU and Motherboard with no Hard Drive Installed This Image Displays the CPU with two Hard Drives Installed This Section Will cover how to Install an Optical Drive 1. Remove your new optical drive from its packaging and select the location on the tower where you want to install the drive 2. Remove side panel off of CPU tower 3. Remove front panel to allow you to gain optical drive ports 4. Depending upon what type of Optical Drive it Is Will determine which area you want to install it. 5. Once in the designated space make sure the drive is secured by the thumb tightening crews, or the small screws, in which you will need a screwdriver. Make sure the holes are properly lined up, before you began to secure drive to tower 6. Put front panel back on making sure that optical drive is fully assessable 7. You then need to locate your SATA cable and connect one end to the optical drive and the other to the motherboard. 8. You can now replace side panel of tower, to enclose the inside of your CPU This section will cover how to install a Video Card 1. Locate on your mother board, where you want to install the video card on the mother board. 2. Make sure you remove the expansion slot for the area in which you’re going to install your video card 3. Push down with firm and steady pressure to make sure it is secured properly, the bottom of the card should be facing out of the now open expansion slot 4. Make sure the card is screwed in 5. Then locate the power supply and connect it to the video card 6. You can then replace side panel to CPU and do a system check to ensure that video card is working properly This section will cover how to install Monitors, Mouse and Keyboards Depending upon the type of connection that is used determines greatly how the above items are connected 1. If you are using the above devices that are connected via, cord you simply plug these devices in at the rear of the CPU in the USB port and they should work from there. If they do not immediately it’s a good chance that you will need to install drivers for the peripheral devices 2. If you are using wireless devices, the setup is very similar. Your take the wireless receiver for these devices and plugs them into the CPU and they should work. If not as stated before, drivers for these devices may need to be installed on your system This section will cover BIOS Configuration 1. You can start the BIOS configuration/setup by pressing F2 while the system is powering on. 2. Use the arrow keys from your keyboard to navigate you through the BIOS setup 3. Once you choose what you want to modify select it and hit enter 4. Use the arrow keys again to change the field 5. Once you are complete in the changing of the BIOS settings, move toward the exit screen 6. Select one of the options to exit and press enter ...
Purchase answer to see full attachment

Final Answer

Attached.

PC Build up Manual
1

Name
Institution
Date

PC Build up Manual
2

In this section of the PC Build Manual
Part 2, the following areas will be covered
1. Installing Hard Drive
2. Installing Optical Drive
3. Installing Video Card

3. Make sure the side cover is removed
from the CPU

4. Connecting Monitors, Keyboard, and
Mouse
5. BIOS Configuration
In this section of Manual Part 2,
Installing a Hard Drive will be Covered.
4. Find a convenient space on the inside
It is important that the reader follow all
of the tower to mount your hard
directions, to ensure a properly installed
drive
Hard Drive.
Adding a new Hard Drive will allow you to
store more data on your computer and its
simple to complete.
1. Ground Yourself with an anti-static
5. Use the necessary screws to securely
wrist band so you don’t fry your hard
fasten the hard drive into the holes
drive or motherboard
one the CPU tower
2. Remove your new hard drive from
its packaging

PC Build up Manual
3

6. Then connect the power cable to the

9. Power your computer on go to My

hard drive in its designated port

Computer located in your start menu

located on the Hard Drive

to make sure the hard drive is shown
and properly installed

7. Connect the SATA cable to the other
open port located on hard drive it
should be in the shape of a L.

This Image Displays the CPU and
Motherboard with no Hard Drive
Installed

8. Once all above steps are completed
fasten the side panel back on to the
tower and plug in computer to a
power.

...

Purdue University

Anonymous
Top quality work from this tutor! I’ll be back!

Anonymous
Heard about Studypool for a while and finally tried it. Glad I did caus this was really helpful.

Anonymous
Thank you! Reasonably priced given the quality

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4

Brown University





1271 Tutors

California Institute of Technology




2131 Tutors

Carnegie Mellon University




982 Tutors

Columbia University





1256 Tutors

Dartmouth University





2113 Tutors

Emory University





2279 Tutors

Harvard University





599 Tutors

Massachusetts Institute of Technology



2319 Tutors

New York University





1645 Tutors

Notre Dam University





1911 Tutors

Oklahoma University





2122 Tutors

Pennsylvania State University





932 Tutors

Princeton University





1211 Tutors

Stanford University





983 Tutors

University of California





1282 Tutors

Oxford University





123 Tutors

Yale University





2325 Tutors