Wireshark - Analysis of Network Data Assignment

User Generated

kavpx101

Computer Science

Description

Wireshark Assignment

Your Class Project involves the analysis of network data using Wireshark. To complete this class project you need to do the following:

1. Download and Install Wireshark from this website: https://www.wireshark.orgLinks to an external site.

NOTE: There are both Mac and Windows version available for download

2. Go to the Wireshark wiki: https://wiki.wireshark.orgLinks to an external site.

3. While on the Wireshark wiki page, scroll down and review all topics under the section titled, "Use Wireshark / TShark".

4. Take a look at some of the following videos for additional training: https://www.lcuportal2.com/wireshark101.html (Links to an external site.)Links to an external site. and https://www.youtube.com/playlist?list=PLnKJHZhW_BuCPcIg6Ja2boDeHIRwoHMT- (Links to an external site.)Links to an external site. for more helpful information about Wireshark.

5. Go to the Sample Capture page (https://wiki.wireshark.org/SampleCaptures (Links to an external site.)Links to an external site.) and download any sample capture of your choice. Only choose one sample capture file. You have plenty of interesting sample to choose from. Open the sample capture file with Wireshark. Analyze the sample using techniques described in the wiki pages, videos, and specific protocol information cited in the course text.

6. Write a 2 to 3 page paper (you can write more if needed) summarizing your analysis of your sample packet. Be sure to name the sample file and protocol you used and provide at least 1 screen shot from your Wireshark analysis.

User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Explanation & Answer

Attached.

Surname 1
Name
Supervisor
Course
Date
Report
For my report, I used the sample capture file ‘ipv4frags.pcap’ downloaded from the link provided
earlier. The capture file has two packets send using two protocols i.e. Internet protocol version four
(IPv4) and the Internet Control Message Protocol (ICMP). The ICMP protocol has sent and received
packet so this is the one we are going to analyze in Wireshark. To do this we filter the protocol and
set it to ICMP on Wireshark. This will make sure that only the ICMP protocol packets are displayed.
The resulting packets for analysis look as such...


Anonymous
Really helped me to better understand my coursework. Super recommended.

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4

Similar Content

Related Tags