rephrase the procedure please

User Generated

fnwwnqrn

Humanities

Description

rephrase the procedure please all of it and if there is any words but I dont think so. So just the procedure

User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Explanation & Answer

Hello, If you are okay with the document, leave a 5 star rating. Am here for any revison you might have. Cheers

Physics II: Ohm's Law Worksheet
Class:
Section:
Lab Group:
Assignment Date:

PHYSICS II Lab
11:00-12:50
14
5/1/2019

Names:

answer key:
Table 1: Resistance
Nominal
Measured
Resistors
Resistance, Ω Resistance, Ω
10
10.4
R1
51
50.7
R3
68
67.7
R5
128.8
128.6
Series connection
7.65
7.6
Parallel connection

Resistors
R1
R3
R5

Table 3: Current
Expected
Measured
Current, A
Current, A
0.5971
0.536
0.1225
0.1098
0.0917
0.0843

Error, %
4.00
-0.59
-0.44
-0.16
-0.65

Error, %
-10.2
-10.4
-8.07

Parallel connection

0.8113

0.6246

-23.0

Battery

0.817

0.6211

-24.0

m's Law Worksheet
Abdulelah Abubakr
Sajad Al Darwish

numbers

Resistors
R1
R3
R5
Series connection
Battery

text

data

Table 2: Voltage
Expected
Measured
Voltage, V
Voltage, V
0.485
0.476
2.366
2.412
3.159
3.215
6.003
6.103
6
6.21

Error, %
-1.86
1.94
1.77
1.67
3.5

Table 4: Resistance from Graph Analysis
Nominal
Measured
Resistors
Error, %
Resistance, Ω Resistance, Ω
9.75
-2.5
10
R1
48.84
-4.23
51
R3
64.85
-4.63
68
R5

copyright 2016 Steven Hoke

Graphs of Potential across Resistors over Alternatin

Figure 1: Potential and Current across 10 Ω Resistor over Ti

Figure 2: Potential over Current across 10 Ω Resistor, with Line

Figure 3: Potential over Current across 51 Ω Resistor, with Line

Figure 4: Potential over Current across 68 Ω Resistor, with Lin

istors over Alternating Current

t across 10 Ω Resistor over Time

cross 10 Ω Resistor, with Linear Fit

cross 51 Ω Resistor, with Linear Fit

cross 68 Ω Resistor, with Linear Fit

Procedure:

The following accompanying materials need to be assembled to start the analysis.
Circuit load up
Power enhancer
Battery, crocodile cuts
Multimeter
Present test
Differential voltage test
An information procurement box
The multimeter is used to quantify whether the opposition of every resistor is genuine. Therefore, the qualities of the osten
as off could be discovered and depicted by utilizing the % mistake state from the watched esteem or the ostensible esteem/
From there, the associated resistors that are R1, R3 as well as R5 can be arranged in such a way they could utilize the croc
obstruction through the whole arrangement, and the hypothetical forecast process will check the precision.
A fabricated circuit with a good spring of latent will need to be used to test Ohms Law of the potential drop over every resi
it’s associated with a positive terminal for a source of power where in this case it’s a battery.
For the circuit to be a complete circuit, a joining of one of the present to the negative terminal of the battery as shown in
Since the positive end and the negative end have been clasped and correct terminals of the battery, then there is the potent
Initially, the voluntary arrangement oppositions, as well as the normal current utilizing the standard circuit voltage, are d
normal flow is determined.
Therefore, from the utilization of the multimeter to check the DC voltage over each resistor as well as over the entire arran
battery is done to estimate the voltage adjustment over the terminals. To break down the regular incentive from the estimat
Resistors placed in a parallel are seen on the segment of the trial, and the hypothetical forecast of complete obstruction in
When the majority of the clasps are expelled from the circuit board, the resistors on the posts at that point are presented.
their last details will need to be clipped together.
An accomplishment of the equivalent was attained for the odd numbered posts. Where, in doing that R1, R3, and R5 are asso
resistors.
Therefore, to gauge the proportional opposition through the estimation of the obstruction from one clasp to the other the u
The percent blunder condition is used again and utilized to measure and look at the outcomes. The potential distinction that
made.
Every resistor in the given way has to be equally relative to its opposition according to Ohms law. Coming into realization,
those complete ebbs as well as the flows need to indicate to be equivalent to include the ebbs and flows of every way.
To interface one gathering to the positive terminal of the battery as well as associate the negative terminal to have a compl
parallel obstruction picture below.
A hypothetical expectation of the absolute current utilizing the info as well as the predetermined battery voltage and protec
as croc clasps utilization to interface each terminal into those circuits. There is a hindrance to current along the lines; t
is working with to the terminal of the battery. Once steady current esteem is attained the battery is reconnected. Consequen
the resistor and connecting it to one of the present test terminals could be done. The positive hypothetical expectations and
connectors is done to have an increasingly productive way and also have a similar proportional circuit.
Looking at Ohms law the segment is started, and the power intensifier is connected into an electrical plug that is associated
as the beginning of the power Amp program. Before this is done, the volume needed to be turned up, and once this is set up
This is accomplished through the utilization of the clasp to interface a post to that terminal of the present test then after
terminal. A differential voltage test is connected on the Lab Mission as well as braced the black crocodile cut from the volt
at the same time as shown in Ohms law picture below.
The next step of concentration is the Power Amp Program where the waveform is set to a sine wave, 20 Hz recurrence; 2.0V
program set up is done then the Lumberjack star is expected to be set up. This is done by tapping the clock symbol and then
information, as well as assembled charts of voltage over present and potential vs. current, is gathered. To gauge current an
moving similar test system for R3 and R5 was done.

edure:

erefore, the qualities of the ostensible stand at 10Ohms, 51Ohms as well as 68Ohms and from that the blunder by which the gauging
esteem or the ostensible esteem/ostensible esteem *100%
way they could utilize the croc cuts that are accumulated. The next step is to use the multimeter to be able to gauge and measure the
eck the precision.
he potential drop over every resistor in it is relative to its obstruction. This is achieved through the accumulation of a croc cut where

minal of the battery as shown in the below image is needed to be done.
e battery, then there is the potential to have the current pushed through the majority of all the resistors that are in place.
standard circuit voltage, are determined. Next, the natural energy that is in each resistor utilizing the deliberate opposition plus the

r as well as over the entire arrangement is done and achieved. To end, the disengagement of most of the gator cuts connected to the
regular incentive from the estimate then the percent blunder recipe needs to be utilized.
ecast of complete obstruction in that parallel is determined.
osts at that point are presented. The majority of the joined clasps for trial and the numbered posts that are accumulated as well as
doing that R1, R3, and R5 are associated in parallel implying that the charge for one clasp needs to go to the next via any of the

from one clasp to the other the use of multimeter is used.
mes. The potential distinction that is over every one of the resistors will be equivalent, and this is dependent on the circuit that was

ms law. Coming into realization, that because the majority of the current need to stream downwards then possibly the majority of
ebbs and flows of every way.
egative terminal to have a complete finished circuit with a wellspring of potential the croc clasps need to be utilized as shown in the

rmined battery voltage and protection was gotten. Tests are utilized to measure the flow by halting th...


Anonymous
Awesome! Perfect study aid.

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4

Related Tags