Audio Amplifier Circuit Design Project

User Generated

wuwxuw

Engineering

Description

Hello,

i have an assignment please check the attached file, if you can do 100% correctly.

I need A++ quality work please.

Thank you.

Attachment preview

Project 3 Design an audio amplifier (the circuit of which is given below) , using a single LM741A op-amp, with the following characteristics: gain= 20 dB, input impendance

Unformatted Attachment Preview

Project 3 Due on July 8, 2019 Design an audio amplifier (the circuit of which is given below), using a single LM741A op-amp, with the following characteristics: gain = 20 dB, input impedance Zin = 10K, -3dB point = 20 Hz. Use the non- inverting configuration, and roll off the gain at low frequencies with an input coupling capacitor sized to meet the low-frequency gain specification and to reduce the effects of input offset voltage. Use proper design to minimize the effects of input bias current on output offset. Assume that the signal source has zero output impedance Zout = 0. Determine the bandwidth of your audio amplifier design and calculate the roll-off (reduction) from the mid-frequency gain (in dB) at the highest audio frequency of 20 kHz. Determine the highest input sinusoidal signal peak amplitude Vm , in the audio frequency range of 20 Hz to 20 kHz, that may be amplified by your design without distortion. Use the attached specification sheets for the LM741 to obtain the op-amp characteristics data you need for the design; select the worst-case values for the characteristics needed in your design. Show all the equation development in your report. Value Tabulate your design results here: Design parameter Feedback resistance, RF Input resistance, Ri Compensation resistance, RC Input coupling capacitance, C1 Closed-loop bandwidth of amplifier, BWL Op amp unity-gain frequency (bandwidth) Closed-loop gain at 20 kHz (in dB) Roll-off (decrease) in closed-loop gain at 20 kHz (in dB) Op amp output slew rate Maximum input audio signal amplitude, Vm (that can be amplified without distortion) Audio amplifier circuit: +15 V RE W R w so LM741A Audio V out Signal Source -15 V w
Purchase answer to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Explanation & Answer

Hi :). Here is your assignment :). Let me know if you need more hep;)

1

PROJECT 3
Name:
Professor:
Date: 07/05/2019
Knowing that, in the question, we have the following data:
𝑍𝑖𝑛 = 10𝐾 − 3 𝐷𝐵 𝑝𝑜𝑖𝑛�...


Anonymous
I was struggling with this subject, and this helped me a ton!

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4

Similar Content

Related Tags