CHEM 105 DENSITY – Using Experimental Techniques Lab report

Anonymous

Question Description

i need all the requirement in the file and i need it word and there is no data sheets in uploaded geuss and if you know chem you will know what value to use. if i like your work i will be with u every week

Unformatted Attachment Preview

Guidelines for preparing a research report Organization of the Research Report Most scientific research reports, irrespective of the field, parallel the method of scientific reasoning. That is: the problem is defined, a hypothesis is created, experiments are devised to test the hypothesis, experiments are conducted, and conclusions are drawn. This framework is consistent with the following organization of a research report: Title Abstract Introduction Experimental Details or Theoretical Analysis Results Discussion Conclusions and Summary References Title and Title Page The title should reflect the content and emphasis of the project described in the report. It should be as short as possible and include essential key words. The authors name (e.g., Mary B. Chung) should follow the title on a separate line, followed by the authors affiliation (e.g., Department of Chemistry, Central State College, Central, Arkansas, 67123), the date, and possibly the origin of the report (e.g., In partial fulfillment of a Senior Thesis Project under the supervision of Professor Danielle F. Green, June, 1997). All of the above could appear on a single cover page. Abstract The abstract should, in the briefest terms possible, describe the topic, the scope, the principal findings, and the conclusions. It should be written last to reflect accurately the content of the report. Briefly State the problem or the purpose of the research, indicate the theoretical or experimental plan used, summarize the principle finds and point out major conclusions. The length of abstracts vary, but seldom exceed 200 words. A primary objective of an abstract is to communicate to the reader the essence of the paper. The reader will then be the judge of whether to read the full report or not. Were the report to appear in the primary literature, the abstract would serve as a key source of indexing terms and key words to be used in information retrieval. Introduction "A good introduction is a clear statement of the problem or project and why you are studying it." (The ACS Style Guide. American Chemical Society, Washington, DC, 1986.) The nature of the problem and why it is of interest should be conveyed in the opening paragraphs. This section should describe clearly but briefly the background information on the problem, what has been done before (with proper literature citations), and the objectives of the current project.    Why is this experiment important? Include the key question am I trying to answer? Include the key concepts? Experimental Details or Theoretical Analysis This section should describe what was actually done. It is a succinct exposition of the laboratory notebook, describing procedures, techniques, instrumentation, special precautions, and so on. It should be sufficiently detailed that other experienced researchers would be able to repeat the work and obtain comparable results.   What is my technique/method? The apparatus should be included in this section. ChemSketch. See Figure 1 for an example. The apparatus should be drawn using condensor thermometer addition funnel Figure 1: Alkylation Reaction Setup Data/Results In this section, relevant data, observations, and findings are summarized. Tabulation of data, equations, charts, and figures can be used effectively to present results clearly and concisely. Schemes to show reaction sequences may be used here or elsewhere in the report.  What are my most important data/results? (You may have tables, pictures, diagrams, charts, structures, equations, etc.) What is the most effective format for presentation? See Table 1. Table 1: Temperature Studies Time (s) Temp (o C) 20 30 40 50 60 70 80 90 65 68 70 72 79 89 90 99 Discussion The crux of the report is the analysis and interpretation of the results. What do the results mean? How do they relate to the objectives of the project? To what extent have they resolved the problem? 1. Review data/results a. Compare with literature value, if applicable (are they similar or very different) b. Compare results with different trials, if applicable (are they similar or very different) c. Compare your results with other group results, if applicable (are they similar or very different) d. Look for oddities like violations of conservation of mass (over or under 100% recovery) 2. Go back to detailed experimental and look for places where error could have occurred. 3. Explain 4. Refer to questions asked in the project. Conclusions and Summary A separate section outlining the main conclusions of the project is appropriate if conclusions have not already been stated in the "Discussion" section. Directions for future work are also suitably expressed here. A lengthy report, or one in which the findings are complex, usually benefits from a paragraph summarizing the main features of the report - the objectives, the findings, and the conclusions.  Did I answer the key question? o If yes, what did I conclude? (Reflect on the article you chose for the Logic of an Article assignment. Are their conclusions/inferences different from yours? How?) o If no, what did I conclude? And what other approach/study/experiment should I try? References Literature references should be collated at the end of the report and cited in one of the formats described in The ACS Style Guide or standard journals. Do not mix formats. All references should be checked against the original literature. Preparing the Report Students should use graphics software which allows numerical data to be graphed, chemical structures to be drawn, and mathematical equations to be represented. These are essential tools of the technical writer. All reports should routinely be checked for spelling (spell check programs are helpful), and all manuscripts should be carefully proofread before being submitted. ...
Purchase answer to see full attachment

Tutor Answer

secrist
School: Boston College

this is the simple lab report

Running head: DENSITY EXPERIMENTAL LAB REPORT

Density experimental lab report
Student name
Institutional affiliation
Date

1

DENSITY EXPERIMENTAL LAB REPORT

2

Density experimental lab report
Abstract
Density is one of the physical properties of any given liquid that depict its interaction
with other liquids or solids. There is no given technique that can be used to measure the density
of any solid or liquid physically. However, density can be obtained from measurement of mass
as well as volume of the given substance.
Introduction
Density is defined as a measure of mass per unit volume and is given by the
density formula given below:
𝑚𝑎𝑠𝑠

Density = 𝑣𝑜𝑙𝑢𝑚𝑒
Therefore given the mass and volume of any liquid or solid at constant temperature and pressure,
its’ density can be calculated which is always a constant for a given substance. In other words
density is a measure of the amount of stuff or matter in a unit volume. In this report the volume
of unknown liquid B is measured while its mass is determined experimentally by weighing. The
density formula is then applied to calculate the density of the liquid.
Experimental procedures
Follow the following procedures and record your findings in the table given below:
I.

Using a weighing scale or a beam balance, weigh the mass of an empty ...

flag Report DMCA
Review

Anonymous
Return customer, been using sp for a good two years now.

Anonymous
Thanks as always for the good work!

Anonymous
Excellent job

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4

Brown University





1271 Tutors

California Institute of Technology




2131 Tutors

Carnegie Mellon University




982 Tutors

Columbia University





1256 Tutors

Dartmouth University





2113 Tutors

Emory University





2279 Tutors

Harvard University





599 Tutors

Massachusetts Institute of Technology



2319 Tutors

New York University





1645 Tutors

Notre Dam University





1911 Tutors

Oklahoma University





2122 Tutors

Pennsylvania State University





932 Tutors

Princeton University





1211 Tutors

Stanford University





983 Tutors

University of California





1282 Tutors

Oxford University





123 Tutors

Yale University





2325 Tutors