Description
I need someone to do this assignment for me
Unformatted Attachment Preview
Purchase answer to see full attachment
Explanation & Answer
Attached.
Networking Project
Name
Institution Name
1. The purpose of this project is to configure the network schematic as shown below in
Figure 1 using GNS3
2. Configure the IP addresses of the hosts (make sure you are using VPCs as hosts in your
GNS3). You can configure the IP address of a host using the command
¾ VPCS # ip [address] [netmask] [gateway]
PC1> ping 192.168.1.2
84 bytes from 192.168.1.2 icmp_seq=1 ttl=64 time=0.576 ms
84 bytes from 192.168.1.2 icmp_seq=2 ttl=64 time=0.512 ms
84 bytes from 192.168.1.2 icmp_seq=3 ttl=64 time=0.473 ms
84 bytes from 192.168.1.2 icmp_seq=4 ttl=64 time=0.453 ms
84 bytes from 192.168.1.2 icmp_seq=5 ttl=64 time=1.182 ms
3. Configure the routers (Engineering, CEBIS and Montebello). Recommended routers c3745.
Router Connectivity Dia...