Other
CMIT 350 UMGC Simulating and Testing Network Configurations Project

CMIT 350

University of Maryland Global Campus

CMIT

Question Description

I’m working on a Tech Support exercise and need support.

Instructions

Simulating and Testing Network Configurations

As a network administrator for Bacon Institute, you will need to become familiar with the Packet Tracer simulation tool from Cisco. Packet Tracer is used to simulate and test network configurations. This allows you to work out and improve upon the settings before implementing them.

Using the diagram and configuration information from your first task, create a Packet Tracer simulation.

NOTE; First task is uploaded in the file below.

Unformatted Attachment Preview

Servers must have security either by using SE-LINUX or ACLs in the server OS allowing TCP/UDP connections to HTTP AND DB ports only Student s To verify HA/failover for DC, the HQ: Orlando should be brought down by for example through power outage and see if Phoenix will serve as the DC. Professor s For the DB & WS, the HQ: Orlando should be brought down and see if Toronto will serve Web and DB traffic Subject CMIT 350 Date:03/15/2020 1st Floor 2nd Floor S 1 DC HA: MP-BGP EVPN/OTV DC: Secondary S2 2nd Floor 1st Floor DC: Primary R1 R2 F2 DB & Web servers F1 DB & Web Servers HA MPLS/DMVPN/4G/5G 2nd Floor Edge F4 F3 S3 DC: Branch DB & Web Servers 1st Floor R4 S4 1st Floor 2nd Floor R3 DC: Branch Somit Maloo. CCNP and CCIE Data Center Core DCCOR 350-601 Official Cert Guide. Cisco Press, 2020. Student Name: Solesi Olumuyiwa Professor Name: McGarry, Mark Course Title CMIT 350 Date:03/15/2020 Network Infrastructure Design Template Part 1: Complete the Router Networking Tables Table 1 lists the current Router Networking and Information for the organization. For your Part 1, use the information in this table to complete Tables 2, 3, and 4 below. Add additional rows if necessary. Table 1: Current Router Networking and Information Site number Orlando Site Router 1 Management VLAN IP - 192.168.1.0 Production VLAN IP - 192.168.11.0 Internet VLAN IP- 120.1.1.0/24 IP Assignments Loopback - 10.1.1.1/32 VPN Tunnels 1 Site number TBD - based on requirements Phoenix Site Router 1 2 Management VLAN IP - 192.168.2.0 Production VLAN IP - 192.168.22.0 Internet VLAN IP- 120.1.1.0/24 IP Assignments Loopback - 10.2.2.2/32 VPN Tunnels TBD - based on requirements Phoenix Site Router 2 3 Management VLAN IP - 192.168.3.0 Production VLAN IP - 192.168.33.0 Internet VLAN IP- 120.1.1.0/24 IP Assignments Loopback - 10.3.3.3/32 VPN Tunnels TBD - based on requirements Toronto Site Router 4 Management VLAN IP - 192.168.4.0 Production VLAN 2 Site number IP - 192.168.44.0 Internet VLAN IP- 120.1.1.0/24 IP Assignments Loopback - 10.4.4.4/32 VPN Tunnels TBD - based on requirements Table 2: Orlando Site Net ID Usable Range Subnet Mask CIDR Value Broadcast 192.168.1.0 192.168.1.1192.168.1.254 255.255.255.0 24 192.168.1.255 192.168.11.0 192.168.1.1192.1.254 255.255.255.0 24 192.168.11.255 10.1.1.1 10.1.1.1 only 255.255.255.255 32 N/A Table 3: Phoenix Site Net ID Usable Range Subnet Mask CIDR Value Broadcast 192.168.3.0 192.168.3.1192.168.3.254 255.255.255.0 24 192.168.3.255 192.168.33.0 192.168.33.1- 255.255.255.0 24 192.168.33.255 192.168.33.254 10.3.3.3 10.3.3.3 only 255.255.255.255 32 N/A 3 Net ID Usable Range Subnet Mask CIDR Value Broadcast 192.168.2.0 192.168.2.1192.168.2.254 255.255.255.0 24 192.168.2.255 192.168.22.0 192.168.22.1192.168.22.254 255.255.255.0 24 192.168.22.255 10.2.2.2 255.255.255.255 32 10.2.2.2 only N/A Table 4: Toronto Site Net ID Usable Range Subnet Mask CIDR Value Broadcast 192.168.4.0 192.168.4.1192.168.4.254 255.255.255.0 24 192.168.4.255 192.168.44.0 192.168.44.1- 255.255.255.0 24 192.168.44.255 255.255.255.255 32 N/A 192.168.44.254 10.4.4.4 10.4.4.4 only 4 Part 2: Design the Network Infrastructure Create a network drawing using Visio or Draw.io, specific to this organization, listing the network’s topology. In your diagram, include any necessary hardware. The drawing should include enough detail to show the interconnections of the topology. The viewer should be able to understand the Bacon Enterprises network environment. All devices require hostnames and should use the following naming conventions: • Routers: Rx; where x is the site number • Switches: Sx; where x is the site number • Include necessary details for high availability. • Any external source that is consulted should be appropriately cited. When you are through, save the diagram as a PDF and submit it to the Assignment folder along with this template. Note: You will need to use this diagram in Project 3, so save the source file. 5 ...
Purchase answer to see full attachment
Student has agreed that all tutoring, explanations, and answers provided by the tutor will be used to help in the learning process and in accordance with Studypool's honor code & terms of service.

Final Answer

Attached.

HQ:Orlando site 1

Branch : Phoenix Site 2

1st floor

X.25 Host
S1

...

Lincolvin (13640)
Carnegie Mellon University

Anonymous
Return customer, been using sp for a good two years now.

Anonymous
Thanks as always for the good work!

Anonymous
Excellent job

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4
Similar Questions
Related Tags