Industrial ventilation questions

User Generated

fuyhfu

Engineering

Description

simple and correct answers.

Answers in word doc

use the provided materials to answer the questions.

Unformatted Attachment Preview

1- Modified Exercise 6-6: What is the estimated flow rate through a hood if K = 0.1, SPh = 2.0 inch w.g., and the duct diameter is D = 24 inches? (Assume STP, d = 1). 2- How many duct diameters away from the hood (or from the beginning of the duct), should you take SP measurement in the duct? 3- At the hood, if all of the available static pressure can be converted to velocity pressure (that is, 100%), please determine the value and relationship for the following parameter: SPh _________ VP (); Hood entry loss (he) = _______" w.g.; Hood loss factor K (or Fh) = __________; Hood's efficiency (Ce) = __________. 4- Use your own words to explain why hood is one of the most important components for LEV system? 5- Please give at least two specific hood examples for the following types of hood: 1) Enclosing hood; 2) Capture hood; 3) Receiving hood. Look at page 6-10 6- At the hood with df = 1, if only 90% of the available static pressure can be converted to velocity Pressure (that is, VP = - 90% SPh or 90% absolute value of SPh), please determine the value and relationship for the following parameter: Hood's efficiency (Ce) = __________; Hood loss factor K (or Fh) = __________ ; Hood entry loss (he) = _______% of SPh. You should include appropriate unit and keep three decimals. 7- Use your own words to explain why you will not take pressure measurement within hood or at the entrance to the duct? 8- To allow LEV to remove airborne contaminates from the working environment, the SP in the hood should be positive or negative? Briefly explain the reason 9- Look at ABIH sheet 9-a, compare the bell mouth entry to the plain duct end, and determine the percentage of SP converted into VP (or calculate VP/SP*100%) between the two hoods. Remember, you can use Ce equation to solve this question. This question will help you undderstand why adding flange is important.
Purchase answer to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Explanation & Answer

😱 ok iam on it

ANSWER TO NO 7
Why I will not take pressure measurement within hood or at the entrance of duct
In a simple system, it is hazardous, the fan produces a negative pressure in the duct immediately
upstream, and this draws air through the system. There is a pressure drop across the air cleaner,
and along each section of the duct. Finally there is a pressure drop at the entrance to
the hood which draws air in from the workplace.
ANSWER TO QUESTION 8
Yes the SP being the static pressure should be positive to avoid ambiguity.. Make-up air Exhaust

ventilation systems require replacement of exhausted . There suppose to be also automatic
chemical n...


Anonymous
This is great! Exactly what I wanted.

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4

Related Tags