Chemical Safety Systems Safety and Mechanical Integrity System Worksheet

User Generated

xunyvvv

Business Finance

Description

answer the following questions

.

Unformatted Attachment Preview

Name: ________________________________ Systems Safety l Spring 2020 (3 points each) 1. Identify three items that should be part of the mechanical integrity system as required during Process Safety Management Implementation. 2. What are three of the functions of the Chemical Safety ad Hazard Investigation Board? 3. Identify three site mechanics overview after-action requirements to be done during a Process Safety Management audit? 4. What is the Management Oversight and Risk Tree technique used for? 5. What if the primary advantage of the Mort chart? 6. How may items are available on the MORT chart for review? 7. Identify four working conditions that should be reviewed on a Change Analysis worksheet. 8. What is probably the most frequently used choice during Change Analysis when comparing accident to comparable situation. 9. When using fault tree analysis, what is the mathematical calculation applied to the and gate and to the or gate? 10. What is the purpose of Fault Tree Analysis? 11. When using Fault Tree Analysis, what are the three particular types of component failures to be examined? 12. Identify four types of analysis that an FMEA is used for. 13. What are the two types of FMEAs? 14. What is an Event Tree Analysis? 15. When using Binary model for Event Tree Analysis how do you trace successes and failures? 16. How do you determine probability of each path of and ETA? 17. How do you determine probability of systems success? 18. What is the focus of FTA in ‘bow-tie’ model? 19. What is focus of ETA in ‘bow-tie’ model? 20. Why are people (human reliability) much more difficult to analyze than hardware? 21. In the System Safety Precedence what items are in the lowest are of controls? 22. Identify two examples of natural behavioral stereotypes. 23. Identify three examples of learned stereotypes. 24. Identify three human factor errors made by designers. 25. Identify two types of deductive tree analysis methods. 26. What are the three areas that a Preliminary Hazard Analysis technique covers. 27. What is the purpose of an ETBA? 28. Identify three products that ETBAs can be used to help prepare. 29. FMEA hardware analysis concentrates on what three areas? 30. What are the inputs needed in the RAC and the Frequency columns on FMEA? 31. In MORT analysis what does the color blue indicate and what needs to be done to resolve this type of classification. 32. In MORT analysis what does the color black indicate and how is this information reviewed. 33. Identify four post-accident actions reviewed by MORT analysis technique. (4 points)
Purchase answer to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Explanation & Answer

Attached.

Name: ________________________________
Systems Safety l Spring 2020
(3 points each)
1. Identify three items that should be part of the mechanical integrity system as required during
Process Safety Management Implementation.
a) Emergency shutdown systems.
b) Pressure vessels and storage tanks.
c) Relief and vent systems and devices.

2. What are three of the functions of the Chemical Safety ad Hazard Investigation Board?
a) Investigating hazards as well as chemical accidents, endorsing actions for
protecting the environment, the public as well as the workers.
b) Making safety recommendations to local, state and federal agencies which entail
private organizations, health administration, environmental protection agency and
the occupational safety to minimize the instances of chemical incidents.
c) Issuing of reports that are pursuant to its obligations to find out the cause of
chemical incidents and provide report on circumstances and facts in conjunction
to such incidents.

3. Identify three site mechanics overview after-action requirements to be done during a Process
Safety Management audit?
a) Information of the hazards looked at.
b) Information on the technology of the process.
c) Information on the equipment in the process

4. What is the Management Oversight and Risk Tree technique used for?
Its designed to provide a technique for thorough, searching investigation of occupational
accidents and analysis of safety program...


Anonymous
I was struggling with this subject, and this helped me a ton!

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4

Related Tags