Wireshark Lab-802.11, computer science homework help

User Generated

znephf0811

Computer Science

Description

I need someone to complete the wireshark lab for me. I have attached the document with the instructions. Please include screen shots. 

Unformatted Attachment Preview

Wireshark Lab: 802.11 v7.0 Supplement to Computer Networking: A Top-Down Approach, 7th ed., J.F. Kurose and K.W. Ross “Tell me and I forget. Show me and I remember. Involve me and I understand.” Chinese proverb © 2005-2016, J.F Kurose and K.W. Ross, All Rights Reserved In this lab, we’ll investigate the 802.11 wireless network protocol. Before beginning this lab, you might want to re-read Section 7.3 in the text1. Since we’ll be delving a bit deeper into 802.11 than is covered in the text, you might want to check out “A Technical Tutorial on the 802.11Protocol,” by Pablo Brenner (Breezecom Communications), http://www.sss-mag.com/pdf/802_11tut.pdf, and “Understanding 802.11 Frame Types,” by Jim Geier, http://www.wi-fiplanet.com/tutorials/article.php/1447501. And, of course, there is the “bible” of 802.11 - the standard itself, “ANSI/IEEE Std 802.11, 1999 Edition (R2003),” http://gaia.cs.umass.edu/wireshark-labs/802.11-1999.pdf. In particular, you may find Table 1 on page 36 of the standard particularly useful when looking through the wireless trace. In all of the Wireshark labs thus far, we’ve captured frames on a wired Ethernet connection. Here, since 802.11 is a wireless link-layer protocol, we’ll be capturing frames “in the air.” Unfortunately, many device drivers for wireless 802.11 NICs don’t provide the hooks to capture/copy received 802.11 frames for use in Wireshark (see Figure 1 in Lab 1 for an overview of packet capture). Thus, in this lab, we’ll provide a trace of captured 802.11 frames for you to analyze and assume in the questions below that you are using this trace. If you’re able to capture 802.11 frames using your version of Wireshark, you’re welcome to do so. Additionally, if you’re really into frame capture, you can buy a small USB device, AirPcap, http://www.cacetech.com, that captures 802.11 frames and provides integrated support for Wireshark. 1. Getting Started Download the zip file http://gaia.cs.umass.edu/wireshark-labs/wireshark-traces.zip and extract the file Wireshark_802_11.pcap. This trace was collected using AirPcap and Wireshark running on a computer in the home network of one of the authors, consisting 1 References to figures and sections are for the 7th edition of our text, Computer Networks, A Top-down Approach, 7th ed., J.F. Kurose and K.W. Ross, Addison-Wesley/Pearson, 2016. of a Linksys 802.11g combined access point/router, with two wired PCs and one wireless host PC attached to the access point/router. The author is fortunate to have other access points in neighboring houses available as well. In this trace file, we’ll see frames captured on channel 6. Since the host and AP that we are interested in are not the only devices using channel 6, we’ll see a lot of frames that we’re not interested in for this lab, such as beacon frames advertised by a neighbor’s AP also operating on channel 6. The wireless host activities taken in the trace file are:  The host is already associated with the 30 Munroe St AP when the trace begins.  At t = 24.82, the host makes an HTTP request to http://gaia.cs.umass.edu/wireshark-labs/alice.txt. The IP address of gaia.cs.umass.edu is 128.119.245.12.  At t=32.82, the host makes an HTTP request to http://www.cs.umass.edu, whose IP address is 128.119.240.19.  At t = 49.58, the host disconnects from the 30 Munroe St AP and attempts to connect to the linksys_ses_24086. This is not an open access point, and so the host is eventually unable to connect to this AP.  At t=63.0 the host gives up trying to associate with the linksys_ses_24086 AP, and associates again with the 30 Munroe St access point. Once you have downloaded the trace, you can load it into Wireshark and view the trace using the File pull down menu, choosing Open, and then selecting the Wireshark_802_11.pcap trace file. The resulting display should look just like Figure 1. Figure 1: Wireshark window, after opening the Wireshark_802_11.pcap file 2. Beacon Frames Recall that beacon frames are used by an 802.11 AP to advertise its existence. To answer some of the questions below, you’ll want to look at the details of the “IEEE 802.11” frame and subfields in the middle Wireshark window. Whenever possible, when answering a question below, you should hand in a printout of the packet(s) within the trace that you used to answer the question asked. Annotate the printout2 to explain your answer. To print a packet, use File->Print, choose Selected packet only, choose Packet summary line, and select the minimum amount of packet detail that you need to answer the question. 1. What are the SSIDs of the two access points that are issuing most of the beacon frames in this trace? 2. What are the intervals of time between the transmissions of the beacon frames the linksys_ses_24086 access point? From the 30 Munroe St. access point? (Hint: this interval of time is contained in the beacon frame itself). 3. What (in hexadecimal notation) is the source MAC address on the beacon frame from 30 Munroe St? Recall from Figure 7.13 in the text that the source, destination, and BSS are three addresses used in an 802.11 frame. For a detailed discussion of the 802.11 frame structure, see section 7 in the IEEE 802.11 standards document (cited above). 4. What (in hexadecimal notation) is the destination MAC address on the beacon frame from 30 Munroe St?? 5. What (in hexadecimal notation) is the MAC BSS id on the beacon frame from 30 Munroe St? 6. The beacon frames from the 30 Munroe St access point advertise that the access point can support four data rates and eight additional “extended supported rates.” What are these rates? 3. Data Transfer Since the trace starts with the host already associated with the AP, let first look at data transfer over an 802.11 association before looking at AP association/disassociation. Recall that in this trace, at t = 24.82, the host makes an HTTP request to http://gaia.cs.umass.edu/wireshark-labs/alice.txt. The IP address of gaia.cs.umass.edu is 128.119.245.12. Then, at t=32.82, the host makes an HTTP request to http://www.cs.umass.edu. What do we mean by “annotate”? If you hand in a paper copy, please highlight where in the printout you’ve found the answer and add some text (preferably with a colored pen) noting what you found in what you ‘ve highlight. If you hand in an electronic copy, it would be great if you could also highlight and annotate. 2 7. Find the 802.11 frame containing the SYN TCP segment for this first TCP session (that downloads alice.txt). What are three MAC address fields in the 802.11 frame? Which MAC address in this frame corresponds to the wireless host (give the hexadecimal representation of the MAC address for the host)? To the access point? To the first-hop router? What is the IP address of the wireless host sending this TCP segment? What is the destination IP address? Does this destination IP address correspond to the host, access point, first-hop router, or some other network-attached device? Explain. 8. Find the 802.11 frame containing the SYNACK segment for this TCP session. What are three MAC address fields in the 802.11 frame? Which MAC address in this frame corresponds to the host? To the access point? To the first-hop router? Does the sender MAC address in the frame correspond to the IP address of the device that sent the TCP segment encapsulated within this datagram? (Hint: review Figure 6.19 in the text if you are unsure of how to answer this question, or the corresponding part of the previous question. It’s particularly important that you understand this). 3. Association/Disassociation Recall from Section 7.3.1 in the text that a host must first associate with an access point before sending data. Association in 802.11 is performed using the ASSOCIATE REQUEST frame (sent from host to AP, with a frame type 0 and subtype 0, see Section 7.3.3 in the text) and the ASSOCIATE RESPONSE frame (sent by the AP to a host with a frame type 0 and subtype of 1, in response to a received ASSOCIATE REQUEST). For a detailed explanation of each field in the 802.11 frame, see page 34 (Section 7) of the 802.11 spec at http://gaia.cs.umass.edu/wireshark-labs/802.11-1999.pdf. 9. What two actions are taken (i.e., frames are sent) by the host in the trace just after t=49, to end the association with the 30 Munroe St AP that was initially in place when trace collection began? (Hint: one is an IP-layer action, and one is an 802.11-layer action). Looking at the 802.11 specification, is there another frame that you might have expected to see, but don’t see here? 10. Examine the trace file and look for AUTHENICATION frames sent from the host to an AP and vice versa. How many AUTHENTICATION messages are sent from the wireless host to the linksys_ses_24086 AP (which has a MAC address of Cisco_Li_f5:ba:bb) starting at around t=49? . 11. Does the host want the authentication to require a key or be open? 12. Do you see a reply AUTHENTICATION from the linksys_ses_24086 AP in the trace? 13. Now let’s consider what happens as the host gives up trying to associate with the linksys_ses_24086 AP and now tries to associate with the 30 Munroe St AP. Look for AUTHENICATION frames sent from the host to and AP and vice versa. At what times are there an AUTHENTICATION frame from the host to the 30 Munroe St. AP, and when is there a reply AUTHENTICATION sent from that AP to the host in reply? (Note that you can use the filter expression “wlan.fc.subtype == 11and wlan.fc.type == 0 and wlan.addr == IntelCor_d1:b6:4f” to display only the AUTHENTICATION frames in this trace for this wireless host.) 14. An ASSOCIATE REQUEST from host to AP, and a corresponding ASSOCIATE RESPONSE frame from AP to host are used for the host to associated with an AP. At what time is there an ASSOCIATE REQUEST from host to the 30 Munroe St AP? When is the corresponding ASSOCIATE REPLY sent? (Note that you can use the filter expression “wlan.fc.subtype < 2 and wlan.fc.type == 0 and wlan.addr == IntelCor_d1:b6:4f” to display only the ASSOCIATE REQUEST and ASSOCIATE RESPONSE frames for this trace.) 15. What transmission rates is the host willing to use? The AP? To answer this question, you will need to look into the parameters fields of the 802.11 wireless LAN management frame. 4. Other Frame types Our trace contains a number of PROBE REQUEST and PROBE RESPONSE frames. 16. What are the sender, receiver and BSS ID MAC addresses in these frames? What is the purpose of these two types of frames? (To answer this last question, you’ll need to dig into the online references cited earlier in this lab).
Purchase answer to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Explanation & Answer

Hello, here's your solution. If you need something more please contact me.Have a nice day.

Wireshark Lab: 802.11 v7.0
Supplement to Computer Networking: A Top-Down
Approach, 7th ed., J.F. Kurose and K.W. Ross

“Tell me and I forget. Show me and I remember. Involve me and I
understand.” Chinese proverb
© 2005-2016, J.F Kurose and K.W. Ross, All Rights Reserved

In this lab, we’ll investigate the 802.11 wireless network protocol. Before beginning this
lab, you might want to re-read Section 7.3 in the text1. Since we’ll be delving a bit deeper
into 802.11 than is covered in the text, you might want to check out “A Technical
Tutorial on the 802.11Protocol,” by Pablo Brenner (Breezecom Communications),
http://www.sss-mag.com/pdf/802_11tut.pdf, and “Understanding 802.11 Frame Types,”
by Jim Geier, http://www.wi-fiplanet.com/tutorials/article.php/1447501. And, of course,
there is the “bible” of 802.11 - the standard itself, “ANSI/IEEE Std 802.11, 1999 Edition
(R2003),” http://gaia.cs.umass.edu/wireshark-labs/802.11-1999.pdf. In particular, you
may find Table 1 on page 36 of the standard particularly useful when looking through the
wireless trace.
In all of the Wireshark labs thus far, we’ve captured frames on a wired Ethernet
connection. Here, since 802.11 is a wireless link-layer protocol, we’ll be capturing frames
“in the air.” Unfortunately, many device drivers for wireless 802.11 NICs don’t provide
the hooks to capture/copy received 802.11 frames for use in Wireshark (see Figure 1 in
Lab 1 for an overview of packet capture). Thus, in this lab, we’ll provide a trace of
captured 802.11 frames for you to analyze and assume in the questions below that you are
using this trace. If you’re able to capture 802.11 frames using your version of Wireshark,
you’re welcome to do so. Additionally, if you’re really into frame capture, you can buy a
small USB device, AirPcap, http://www.cacetech.com, that captures 802.11 frames and
provides integrated support for Wireshark.

1. Getting Started
Download the zip file http://gaia.cs.umass.edu/wireshark-labs/wireshark-traces.zip and
extract the file Wireshark_802_11.pcap. This trace was collected using AirPcap and
Wireshark running on a computer in the home network of one of the authors, consisting
1

References to figures and sections are for the 7th edition of our text, Computer Networks, A Top-down
Approach, 7th ed., J.F. Kurose and K.W. Ross, Addison-Wesley/Pearson, 2016.

of a Linksys 802.11g combined access point/router, with two wired PCs and one wireless
host PC attached to the access point/router. The author is fortunate to have other access
points in neighborin...


Anonymous
Excellent! Definitely coming back for more study materials.

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4

Related Tags