ECE 453 Engineering System Communication System Questions

User Generated

aavv

Engineering

ECE 453

ECE

Description

Q1) For a single sideband modulator performing multi-tone modulation, the message signal is 8 sin ωm(t) + 4 cos mt, the carrier is cos ωct and ωc = 10ωm. Determine the time domain expressions for the upper sideband and the lower sideband versions of the SSB signal. (4 points)

Q2) The message signal input to a modulator is given by Am cos(2π×104t). (4 points)

(a) If frequency modulation is performed with kf =5π × 104, find the FM bandwidth when (i) Am = 2 and (ii) Am = 4.

(b) If phase modulation is performed with kp = 2.25, find the PM bandwidth when
(i) Am = 2 and (ii) Am = 4.

Q3) Given that a delta modulation has m(t) = 3cos40πt + 4cos60πt, calculate the minimum sampling frequency required to prevent slope overload.

Assume that Δ= 0.02π. (4 points)

Q4) Twenty baseband channels, each band-limited to 2.4 kHz, are sampled and multiplexed at a rate of 6 kHz. What is the required bandwidth for transmission if the multiplexed samples use a PCM system?(4 points)

Q5) Time-division multiplexing is used to transmit two signals m1(t) and m2(t). The highest frequency of m1(t) is 4 kHz, while that of m2(t) is 3.2 kHz. Determine the minimum allowable sampling rate. (4 points)

Unformatted Attachment Preview

Electrical and Computer Engineering Department ECE 453 Communication Systems Syllabus Fall 2020 Final Exam 12/01/2020 Q1) For a single sideband modulator performing multi-tone modulation, the message signal is 8 sin ωm(t) + 4 cos 2ωmt, the carrier is cos ωct and ωc = 10ωm. Determine the time domain expressions for the upper sideband and the lower sideband versions of the SSB signal. (4 points) Q2) The message signal input to a modulator is given by Am cos(2π×104t). (4 points) (a) If frequency modulation is performed with kf =5π × 104, find the FM bandwidth when (i) Am = 2 and (ii) Am = 4. (b) If phase modulation is performed with kp = 2.25, find the PM bandwidth when (i) Am = 2 and (ii) Am = 4. Q3) Given that a delta modulation has m(t) = 3cos40πt + 4cos60πt, calculate the minimum sampling frequency required to prevent slope overload. Assume that Δ= 0.02π. (4 points) Q4) Twenty baseband channels, each band-limited to 2.4 kHz, are sampled and multiplexed at a rate of 6 kHz. What is the required bandwidth for transmission if the multiplexed samples use a PCM system? (4 points) Q5) Time-division multiplexing is used to transmit two signals m1(t) and m2(t). The highest frequency of m1(t) is 4 kHz, while that of m2(t) is 3.2 kHz. Determine the minimum allowable sampling rate. (4 points)
Purchase answer to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Explanation & Answer

Assign...


Anonymous
I was having a hard time with this subject, and this was a great help.

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4

Similar Content

Related Tags