Create a ppt

Writing

Question Description

i need someone can make a presentation from my project
the one that talk about Design and Development of Dual Axis Solar Panel Tracking System using PLC programing
i will attach the project down and the feasibility

Unformatted Attachment Preview

< Design and Development of Dual Axis Solar Panel Tracking System> Feasibility Report Version <1.0> Date:…… 1 Feasibility Report Document Control Approval The Guidance Team and the Customer shall approve this document. Document Change Control Initial Release: Current Release: Indicator of Last Page in Document: Date of Last Review: Date of Next Review: Target Date for Next Update: Distribution List This following list of people shall receive a copy of this document every time a new version of this document becomes available: Guidance Team Members: Dr. Ann Gates Dr. Steve Roach Clients: << client>> Team Members: <> Change Summary The following table details changes made between versions of this document Version Date Modifier Description 2 Feasibility Report Table of Contents DOCUMENT CONTROL APPROVAL DOCUMENT CHANGE CONTROL DISTRIBUTION LIST CHANGE SUMMARY 1. INTRODUCTION PURPOSE OF THE FEASIBILITY REPORT PROJECT DESCRIPTION JUSTIFICATION FOR THE PROPOSED SYSTEM DESIRED SYSTEM FUNCTIONALITY Use Case Diagram Actors Use Case Descriptions 1.5. USER INTERFACE DESCRIPTION 1.1. 1.2. 1.3. 1.4. 1.4.1. 1.4.2. 1.4.3. 2. EXISTING SYSTEMS AND TECHNOLOGIES 3. CONSIDERATIONS 3.1. HEADER 1 4. ANALYSIS 4.1. MARKET ANALYSIS 4.2. TECHNICAL ANALYSIS 4.3. FINANCIAL ANALYSIS 5. COMPARISON OF SOLUTIONS 6. REALISTIC CONSTRAINTS ENVIRONMENTAL ISSUES SUSTAINABILITY ETHICS ISSUES HEALTH AND SAFETY ISSUES SOCIAL AND POLITICAL ISSUES LEGAL CONSEQUENCIES 6.1. 6.2. 6.3. 6.4. 6.5. 6.6. 7. CONCLUSIONS 8. REFERENCES 3 Feasibility Report 1. Introduction In years to come the need for energy will increase manifold while the reserve of conventional energy will deplete in rapid pace. To meet the growing demand of energy harnessing of non-conventional / renewable energy is the necessity. Among all the available non-conventional sources, solar energy is the most abundant and uniformly distributed. Though the technology of trapping the solar energy is studied and developed. It is in existence the process can be in proved to increase efficiency and make it cost effective. As the sun moves across the sky during the day, it is advantageous to have the solar panels track the location of the sun, such that the panels are always perpendicular to the solar energy radiated by the sun [4], [9]. This will tend to maximize the amount of power absorbed by PV systems. It is estimated that using a tracking system, over a fixed system, can increase the power output by 30% - 60%>> << 1.1. Purpose of the Feasibility Report << A feasibility report is a document that assesses potential solutions to the business problem or opportunity, and determines which of these are viable for further analysis. The purpose of the feasibility report is to present the project parameters and define the potential solutions to the defined problem, need, or opportunity. Having brainstormed a variety of potential solutions, the project team expands on each of these potential solutions, providing sufficient detail, including very high-level costing information, to permit the project leader to recommend to the approving authority all of the viable potential solutions that should be further analyzed in the next phase (Business Case). Project constraints and limitations of expenditure are among the various factors that will determine viability >> 1.2. Project Description << To track the sun in two directions that is elevation and azimuth, a dual-axis tracking prototype is developed to capture the maximum sun rays by tracking the movement of the sun in four different directions. One axis is azimuth which allows the solar panel to move left and right. The other axis is elevation and allows the panel to turn up and down. The result of this new development provides the solar panels with extensive freedom of movement. This process makes use of the Light Depending Resistor (LDR) which is important to detect the sun light by following the source of the sun light location. AutoCAD software is being used to design the draft in 2-dimension (2D) for the hardware dual axis solar tacker. Sketch Up software is being used to sketch the drawing to be more real in 3-dimension (3D). Proteus software is being used to design the circuit for the Arduino UNO microcontrollers and H-Bridge IC chip. This implemented system can save more energy and probably offers more reduction in cost. The paper discusses the process of hardware development and the control process of tracking the sun, as well as the circuit design.. >> 4 Feasibility Report 1.3. Justification for the Proposed System << provide a business case for the system. What will the benefits of the system be? Who will benefit? >> 1.4. Desired System Functionality << This should include use case diagram, actor descriptions, and use case summaries. see below. >> 1.4.1. Use Case Diagram 1.4.2. Actors << List all actors and describe each. >> 1.4.3. Use Case Descriptions << List main use cases and describe them. It may be possible to outline the scenarios, but it is not necessary for this report for CS4310 to provide complete scenarios. >> 1.5. User Interface Description << To the extent possible, describe the desired user interface. >> 5 Feasibility Report 2. Existing Systems and Technologies << This section will describe systems and technologies that either achieve a solution or can be used to achieve a solution. You should describe any prototype or production system that is in place, commercial and off-the-shelf software that can be used, and open source software that might apply. Your descriptions should include software that you might use to create a solution. For example, if you require data management, you will need to discuss database management systems. If the system requires interactive graphics, you should discuss graphics packages that can be used. You should find at least two (preferably three) examples of each type of software. 2.1. < << In this section, describe existing systems that achieve or partially achieve the goals of the proposed system. Use the headings and titles as appropriate. >> 2.1.1. Option 1 2.1.2. Option 2 … Option n 2.2. << Second Item>> 2.2.1. Option 1 2.2.2. Option 2 … Option n 6 Feasibility Report 3. Considerations << This section establishes the criteria upon which you will evaluate possible solutions. You must identify the primary concerns related to this project. You need to decide what aspects of the system are most important. Is performance something to worry about? Is usability the driving factor? Is security something for which you must plan? What features in the system matter most?>> 3.1. Header 1 7 Feasibility Report 4. Analysis 4.1. MARKET ANALYSIS 4.2. TECHNICAL ANALYSIS 4.3. FINANCIAL ANALYSIS 8 Feasibility Report 5. Comparison of Solutions << This section should discuss how each option measures up against the considerations described in Section 4 and how each compares with the others. You may choose to include some of the following: • Specific hardware and software requirements • Time constraints • Ease of use • Staffing levels and training required • User preference • Security issues A matrix that compares features is required. >> 9 Feasibility Report 6. Realistic Constraints 6.1. ENVIRONMENTAL ISSUES 6.2. SUSTAINABILITY 6.3. ETHICS ISSUES 6.4. HEALTH AND SAFETY ISSUES 6.5. SOCIAL AND POLITICAL ISSUES 6.6. LEGAL CONSEQUENCIES *: The realistic constraints that have been foreseen here, should be considered in detail in the final EPR 402 report. 10 Feasibility Report 7 . Conclusions In this proposed system, the sun tracking system was implemented which is based on concept of voltage difference by using small solar cells. After examining the information obtained, it can be said that the proposed dual axis sun tracking is a feasible method of maximizing the energy received from solar radiation. The use of dc motors enables accurate tracking of sun while keeping track of the array's current position in relation to its initial position with the help of solar cells. The solar cells are arranged for each axis. The automatic solar radiation tracker is an efficient system for solar energy collection. It has been shown that the sun tracking systems can collect about 20.98 % more energy and proposed system collects 33.99 % than what a fixed panel system collects. In most of the existing solar tracking systems, the main panel gives the necessary power to run the drive with reduces the output power of main panels & reducing efficiency of solar tracking system[13] but in this paper we have given input to driving system only by small cells. Thus small solar cell does two functions simultaneously. One is to sense the position of sun & another is to give input to the motor. Thus, we are using whole available output energy of main panel for more optimized output. 11 Feasibility Report 8.References << [4] D.S. Chauhan, S.K. Srivastava, “Non-Conventional Energy Resources”, New Age International, 2010. ISBN978-81-224-1768-5. [9] A.K.Saxena, V. Dutta, “A versatile microprocessor based controller for solar tracking,” in Proc. IEEE, 1990, pp. 1105 – 1109 [13] Kirti Chaurasiya, Prof. Satish Kumar,“Literature Review on Video Frame Segmentation for Position Control of Parabolic Solar Reflector Using MATLAB”, IJARCET Volume 4, Issue 5, May 2015. All information in the above text that comes from outside sources should be cited. All references that are cited should be enumerated below. Use IEEE citation style. >> 12 Feasibility Report 13 ...
Student has agreed that all tutoring, explanations, and answers provided by the tutor will be used to help in the learning process and in accordance with Studypool's honor code & terms of service.

This question has not been answered.

Create a free account to get help with this and any other question!

Similar Questions
Related Tags