SUNY Brockport Hemagglutination Virtual Lab Report

User Generated

Voryy1

Health Medical

SUNY Brockport

Description

I need you to help me answer questions in a document based on hemagglutination. I've attached multiple things to help you complete this assignment.

The document labeled "hemagglutination assay assignment" has the questions and is the only thing I need to be answered based on all the other supporting documents I sent.

There will be videos I tag that will assist with writing a short answer response to each question that requires it.

Video:

Please be detailed and explain as much as possible based on all the supporting documents. Thank you!

No references is needed.

Unformatted Attachment Preview

Hemagglutination Assay Assignment 1) For the data on slide 7, present a table of results (+,+/-, -) in table form. (See slide 20 for an example of this type of table.) Include the titer for each sample. Describe whether any of the samples show a prozone effect. Interpretation of results (settling patterns): Positive: A smooth mat of agglutinated cells covering the bottom of the tube (+). Negative: A clearly defined button in the bottom of the tube (-). Intermediate: Incomplete settling of cells with no clearly defined button (+/-). 2) For the data on slide 13, present a table of results (+,+/-, -) in table form. Include the titer for each sample. Describe whether any of the samples show a prozone effect. Interpretation of results (settling patterns): Positive: A clearly defined button in the bottom of the tube (+). Negative: A smooth mat of agglutinated cells covering the bottom of the tube (-). Intermediate: Incomplete settling of cells with no clearly defined button (+/-). 3) What is the prozone effect in the hemagglutination assay? Why does this occur? 4) Explain why the titer of a direct hemagglutination assay is the highest dilution that still causes hemagglutination, whereas in the viral hemagglutination inhibition assay, the titer is the highest dilution at which hemagglutination is not observed. 5) If anything greater than a 1:16 Hemagglutination-Inhibition (HI) titer of the test serum is considered indicative of viral infection which samples do you think were from an infected individual (explain your answer)? 6) Why could you use a Hemagglutination-Inhibition Assay (HI), but not a direct Hemagglutination Assay (HA) to diagnose an individual with a viral infection? Describe a method in which you could use agglutination (not hemagglutinationinhibition) that would allow you to detect the virus in a patient’s blood. Hemagglutination assay • Hemagglutination, or haemagglutination, is a specific form of agglutination that involves red blood cells (RBCs). • It has two common uses in the laboratory: blood typing and the quantification of virus dilutions in a Haemagglutination assay. Hemagglutination assay • Principle ▫ Influenza virus particles have an envelope protein called the hemagglutinin, or HA, which binds to sialic acid receptors on cells. ▫ The virus will also bind to erythrocytes (red blood cells), causing the formation of a lattice. ▫ This property is called Hemagglutination, and is the basis of a rapid assay to determine levels of influenza virus present in a sample. ▫ To conduct the assay, two-fold serial dilutions of a virus are prepared, mixed with a specific amount of red blood cells, and added to the wells of a plastic tray. Hemagglutination (HA) Test + RBC Suspension HA Virus Settling Pattern HA Procedure • • • • • • • Label plates (8 or 12 wells/row) Add 50 ul PBS to all wells Add 50 ul prepared virus to 1st well Mix and dilute (50 ul) – 1st through last well Add 50 ul 0.5% washed RBCs to all wells Mix by shaking plates Read at 20 – 30 minutes (when RBCs buttoned) Results (Slide 7) Interpretation • The red blood cells that are not bound by influenza virus sink to the bottom of a well and form a button. • The red blood cells that are attached to virus particles form a lattice that coats the well. • The assay can be performed within 30 minutes, and is therefore a quick indicator of the relative quantities of virus particles. Hemagglutination inhibition assay Principle • Note that some other viruses and some bacteria will also agglutinate red blood cells. To demonstrate that the haemagglutinating agent is influenza disease virus, it is necessary to use a specific virus antiserum to inhibit the haemagglutinating activity. • The HA assay can be easily modified to determine the level of antibodies to influenza virus present in serum samples. • The basis of the HI assay is that antibodies to influenza virus will prevent attachment of the virus to red blood cells. • Therefore haemagglutination is inhibited when antibodies are present. • This assay may be modified to include the addition of an antiserum. By using a standard amount of virus, a standard amount of blood cells, and serially diluting the antiserum, one can identify the concentration of the antiserum (the greatest dilution which inhibits haemagglutination). Hemagglutination-Inhibition (HI) Test + RBC Suspension + HA Virus Antibody Settling Pattern • First obtained a preparation of one of the new influenza viruses, and determined its HA titer by adding a fixed amount of virus to every well of a 96-well plate, equivalent to 32 – 64 HA units. • Then prepared two-fold dilutions of each serum to be tested, and added each dilution series along a row of wells. • Finally, added red blood cells and incubated for 30 minutes. Procedure • • • • • • • Label plates (8 or 12 wells/row) Add 50 µl PBS to all wells Mix & dilute (50 µl) serum through last well Add 50 µl virus preparation to each well Incubate 30 minutes at room temperature Add 50 µl 0.5% washed RBCs. Read at 20 – 30 minutes Results (Slide 13) Interpretation • The highest dilution of serum that prevents hemagglutination is called the HI titer of the serum. • If the serum contains no antibodies that react with the new strain, then haemagglutination will be observed in all wells. • Likewise, if antibodies to the virus are present, hemagglutination will not be observed until the antibodies are sufficiently diluted. • This virus sample has an HAI titer of 1280, which means that the greatest dilution of antibody that still blocked hemagglutination from occurring was at 1280 dilution. At this dilution, the antibodies were still capable of recognizing and binding to the antigens on the virus. Quality Control • Known positive serum • Known negative serum • Serum and cells without antigen (to detect nonspecific agglutination) • Back titration of haemagglutination activity of the antigen (to ensure that 4 hemagglutinating virus (HAU) were tested) Standardization of the HI test • It is important that there is correlation between the results of tests carried out by different technicians and in different laboratories. For this reason HI tests should be standardized both within a laboratory and between laboratories. • Standardization is achieved by following a standard protocol. This will include: ▫ Using a standard 4 HA units of the virus. ▫ Using standard positive anti-serum and negative serum. ▫ Including a serum control for each test serum to detect the presence of non-specific agglutinins. ▫ Using a standard 1 percent dilution of red blood cells. • Figure 1. An example of a haemagglutination where the positive result has failed. In the diagrammatic representation above, the haemagglutination reaction cannot be accepted. The VBS serum negative control displays a positive haemagglutination reaction as evidenced by the sheet formation at the base of the well. This indicates that an error has occurred and the results cannot be accepted. In this case, the process should be repeated. • Figure 2. An example of a haemagglutination where the positive result has worked correctly. In the diagrammatic representation, the heamagglutination reaction is valid. The VBS negative control displays a negative haemagglutination reaction as evidenced by the pellet that has formed at the base of the well. The last positive well is row 7, which indicates that the titre for this serum sample is 128 (i.e the reciprocal of 1/128). This would be an example of an antibody that is present in moderate amounts in the serum Prozone Effect • In an agglutination or precipitation reaction, the zone of relatively high antibody concentrations within which no reaction occurs. As the concentration is lowered below the prozone, the reaction occurs. (Solved by dilution) • Sample #2 below is an example of the prozone effect Serum Dilution 1:1 1:2 1:4 1:8 1:16 1:32 Sample #1 ++ ++ + + +/- +/- Sample #2 - - ++ ++ ++ ++ 1:64 1:128 1:256 1:512 Titer - - - - 32 ++ + +/- - 256 Microbiology Search Laboratory Analysis of the Immune Response Agglutination Assays LEARNING OBJECTIVES Compare direct and indirect agglutination Identify various uses of hemagglutination in the diagnosis of disease Explain how blood types are determined Explain the steps used to cross-match blood to be used in a transfusion In addition to causing precipitation of soluble molecules and flocculation of molecules in suspension, antibodies can also clump together cells or particles (e.g., antigen-coated latex beads) in a process called agglutination (Figure 7 in Overview of Specific Adaptive Immunity). Agglutination can be used as an indicator of the presence of antibodies against bacteria or red blood cells. Agglutination assays are usually quick and easy to perform on a glass slide or microtiter plate (Figure 1). Microtiter plates have an array of wells to hold small volumes of reagents and to observe reactions (e.g., agglutination) either visually or using a specially designed spectrophotometer. The wells come in many different sizes for assays involving different volumes of reagents. Figure 1. Microtiter plates are used for conducting numerous reactions simultaneously in an array of wells. (credit: modification of work by “Microrao”/Wikimedia) Agglutination of Bacteria and Viruses The use of agglutination tests to identify streptococcal bacteria was developed in the 1920s by Rebecca Lancefield working with her colleagues A.R. Dochez and Oswald Avery.[1] She used antibodies to identify M protein, a virulence factor on streptococci that is necessary for the bacteria’s ability to cause strep throat. Production of antibodies against M protein is crucial in mounting a protective response against the bacteria. Lancefield used antisera to show that different strains of the same species of streptococci express different versions of M protein, which explains why children can come down with strep throat repeatedly. Lancefield classified beta-hemolytic streptococci into many groups based on antigenic differences in group-specific polysaccharides located in the bacterial cell wall. The strains are called serovars because they are differentiated using antisera. Identifying the serovars present in a disease outbreak is important because some serovars may cause more severe disease than others. The method developed by Lancefield is a direct agglutination assay, since the bacterial cells themselves agglutinate. A similar strategy is more commonly used today when identifying serovars of bacteria and viruses; however, to improve visualization of the agglutination, the antibodies may be attached to inert latex beads. This technique is called an indirect agglutination assay (or latex fixation assay), because the agglutination of the beads is a marker for antibody binding to some other antigen (Figure 2). Indirect assays can be used to detect the presence of either antibodies or specific antigens. To identify antibodies in a patient’s serum, the antigen of interest is attached to latex beads. When mixed with patient serum, the antibodies will bind the antigen, cross-linking the latex beads and causing the beads to agglutinate indirectly; this indicates the presence of the antibody (Figure 3). This technique is most often used when looking for IgM antibodies, because their structure Figure 2. Antibodies against six different serovars of Group A strep were attached to latex beads. Each of the six antibody preparations was mixed with bacteria isolated from a patient. The tiny clumps seen in well 4 are indicative of agglutination, which is absent from all other wells. This indicates that the serovar associated with well 4 is present in the patient sample. (credit: modification of work by American Society for Microbiology) provides maximum cross-linking. One widely used example of this assay is a test for rheumatoid factor (RF) to confirm a diagnosis of rheumatoid arthritis. RF is, in fact, the presence of IgM antibodies that bind to the patient’s own IgG. RF will agglutinate IgG-coated latex beads. In the reverse test, soluble antigens can be detected in a patient’s serum by attaching specific antibodies (commonly mAbs) to the latex beads and mixing this complex with the serum (Figure 3). Figure 3. (a) Latex beads coated with an antigen will agglutinate when mixed with patient serum if the serum contains IgM antibodies against the antigen. (b) Latex beads coated with antibodies will agglutinate when mixed with patient serum if the serum contains antigens specific to the antibodies. Agglutination tests are widely used in underdeveloped countries that may lack appropriate facilities for culturing bacteria. For example, the Widal test, used for the diagnosis of typhoid fever, looks for agglutination of Salmonella enterica subspecies typhi in patient sera. The Widal test is rapid, inexpensive, and useful for monitoring the extent of an outbreak; however, it is not as accurate as tests that involve culturing of the bacteria. The Widal test frequently produces false positives in patients with previous infections with other subspecies of Salmonella, as well as false negatives in patients with hyperproteinemia or immune deficiencies. In addition, agglutination tests are limited by the fact that patients generally do not produce detectable levels of antibody during the first week (or longer) of an infection. A patient is said to have undergone seroconversion when antibody levels reach the threshold for detection. Typically, seroconversion coincides with the onset of signs and symptoms of disease. However, in an HIV infection, for example, it generally takes 3 weeks for seroconversion to take place, and in some instances, it may take much longer. Similar to techniques for the precipitin ring test and plaque assays, it is routine to prepare serial two-fold dilutions of the patient’s serum and determine the titer of agglutinating antibody present. Since antibody levels change over time in both primary and secondary immune responses, by checking samples over time, changes in antibody titer can be detected. For example, a comparison of the titer during the acute phase of an infection versus the titer from the convalescent phase will distinguish whether an infection is current or has occurred in the past. It is also possible to monitor how well the patient’s immune system is responding to the pathogen. Watch this video that demonstrates agglutination reactions with latex beads. Agglutination assay to detect a… Watch later Share Watch on THINK ABOUT IT How is agglutination used to distinguish serovars from each other? In a latex bead assay to test for antibodies in a patient’s serum, with what are the beads coated? What has happened when a patient has undergone seroconversion? Hemagglutination Agglutination of red blood cells is called hemagglutination. One common assay that uses hemagglutination is the direct Coombs’ test, also called the direct antihuman globulin test (DAT), which generally looks for nonagglutinating antibodies. The test can also detect complement attached to red blood cells. The Coombs’ test is often employed when a newborn has jaundice, yellowing of the skin caused by high blood concentrations of bilirubin, a product of the breakdown of hemoglobin in the blood. The Coombs’ test is used to determine whether the child’s red blood cells have been bound by the mother’s antibodies. These antibodies would activate complement, leading to red blood cell lysis and the subsequent jaundice. Other conditions that can cause positive direct Coombs’ tests include hemolytic transfusion reactions, autoimmune hemolytic anemia, infectious mononucleosis (caused by Epstein-Barr virus), syphilis, and Mycoplasma pneumonia. A positive direct Coombs’ test may also be seen in some cancers and as an allergic reaction to some drugs (e.g., penicillin). The antibodies bound to red blood cells in these conditions are most often IgG, and because of the orientation of the antigen-binding sites on IgG and the comparatively large size of a red blood cell, it is unlikely that any visible agglutination will occur. However, the presence of IgG bound to red blood cells can be detected by adding Coombs’ reagent, an antiserum containing antihuman IgG antibodies (that may be combined with anti-complement) (Figure 4). The Coombs’ reagent links the IgG attached to neighboring red blood cells and thus promotes agglutination. There is also an indirect Coombs’ test known as the indirect antiglobulin test (IAT). This screens an individual for antibodies against red blood cell antigens (other than the A and B antigens) that are unbound in a patient’s serum (Figure 4). IAT can be used to screen pregnant women for antibodies that may cause hemolytic disease of the newborn. It can also be used prior to giving blood transfusions. More detail on how the IAT is performed is discussed below. Figure 4. Click for a larger image. The steps in direct and indirect Coombs’ tests are shown in the illustration. Antibodies that bind to red blood cells are not the only cause of hemagglutination. Some viruses also bind to red blood cells, and this binding can cause agglutination when the viruses cross-link the red blood cells. For example, influenza viruses have two different types of viral spikes called neuraminidase (N) and hemagglutinin (H), the latter named for its ability to agglutinate red blood cells (see Viruses). Thus, we can use red blood cells to detect the presence of influenza virus by direct hemagglutination assays (HA), in which the virus causes visible agglutination of red blood cells. The mumps and rubella viruses can also be detected using HA. Most frequently, a serial dilution viral agglutination assay is used to measure the titer or estimate the amount of virus produced in cell culture or for vaccine production. A viral titer can be determined using a direct HA by making a serial dilution of the sample containing the virus, starting with a high concentration of sample that is then diluted in a series of wells. The highest dilution producing visible agglutination is the titer. The assay is carried out in a microtiter plate with V- or round-bottomed wells. In the presence of agglutinating viruses, the red blood cells and virus clump together and produce a diffuse mat over the bottom of the well. In the absence of virus, the red blood cells roll or sediment to the bottom of the well and form a dense pellet, which is why flat-bottomed wells cannot be used (Figure 5). Figure 5. A viral suspension is mixed with a standardized amount of red blood cells. No agglutination of red blood cells is visible when the virus is absent, and the cells form a compact pellet at the bottom of the well. In the presence of virus, a diffuse pink precipitate forms in the well. (credit bottom: modification of work by American Society for Microbiology) A modification of the HA assay can be used to determine the titer of antiviral antibodies. The presence of these antibodies in a patient’s serum or in a lab-produced antiserum will neutralize the virus and block it from agglutinating the red cells, making this a viral hemagglutination inhibition assay (HIA). In this assay, patient serum is mixed with a standardized amount of virus. After a short incubation, a standardized amount of red blood cells is added and hemagglutination is observed. The titer of the patient’s serum is the highest dilution that blocks agglutination (Figure 6). Figure 6. In this HIA, serum containing antibodies to influenzavirus underwent serial two-fold dilutions in a microtiter plate. Red blood cells were then added to the wells. Agglutination only occurred in those wells where the antibodies were too dilute to neutralize the virus. The highest concentration at which agglutination occurs is the titer of the antibodies in the patient’s serum. In the case of this test, Sample A shows a titer of 128, and Sample C shows a titer of 64. (credit: modification of work by Evan Burkala) THINK ABOUT IT What is the mechanism by which viruses are detected in a hemagglutination assay? Which hemagglutination result tells us the titer of virus in a sample? ANIMALS IN THE LABORATORY Much of what we know today about the human immune system has been learned through research conducted using animals— primarily, mammals—as models. Besides research, mammals are also used for the production of most of the antibodies and other immune system components needed for immunodiagnostics. Vaccines, diagnostics, therapies, and translational medicine in general have all been developed through research with animal models. Consider some of the common uses of laboratory animals for producing immune system components. Guinea pigs are used as a source of complement, and mice are the primary source of cells for making mAbs. These mAbs can be used in research and for therapeutic purposes. Antisera are raised in a variety of species, including horses, sheep, goats, and rabbits. When producing an antiserum, the animal will usually be injected at least twice, and adjuvants may be used to boost the antibody response. The larger animals used for making antisera will have blood harvested repeatedly over long periods of time, with little harm to the animals, but that is not usually the case for rabbits. Although we can obtain a few milliliters of blood from the ear veins of rabbits, we usually need larger volumes, which results in the deaths of the animals. We also use animals for the study of disease. The only way to grow Treponema pallidum for the study of syphilis is in living animals. Many viruses can be grown in cell culture, but growth in cell culture tells us very little about how the immune system will respond to the virus. When working on a newly discovered disease, we still employ Koch’s postulates, which require causing disease in lab animals using pathogens from pure culture as a crucial step in proving that a particular microorganism is the cause of a disease. Studying the proliferation of bacteria and viruses in animal hosts, and how the host immune system responds, has been central to microbiological research for well over 100 years. While the practice of using laboratory animals is essential to scientific research and medical diagnostics, many people strongly object to the exploitation of animals for human benefit. This ethical argument is not a new one—indeed, one of Charles Darwin’s daughters was an active antivivisectionist (vivisection is the practice of cutting or dissecting a live animal to study it). Most scientists acknowledge that there should be limits on the extent to which animals can be exploited for research purposes. Ethical considerations have led the National Institutes of Health (NIH) to develop strict regulations on the types of research that may be performed. These regulations also include guidelines for the humane treatment of lab animals, setting standards for their housing, care, and euthanization. The NIH document “Guide for the Care and Use of Laboratory Animals” makes it clear that the use of animals in research is a privilege granted by society to researchers. The NIH guidelines are based on the principle of the three R’s: replace, refine, and reduce. Researchers should strive to replace animal models with nonliving models, replace vertebrates with invertebrates whenever possible, or use computer-models when applicable. They should refine husbandry and experimental procedures to reduce pain and suffering, and use experimental designs and procedures that reduce the number of animals needed to obtain the desired information. To obtain funding, researchers must satisfy NIH reviewers that the research justifies the use of animals and that their use is in accordance with the guidelines. At the local level, any facility that uses animals and receives federal funding must have an Institutional Animal Care and Use Committee (IACUC) that ensures that the NIH guidelines are being followed. The IACUC must include researchers, administrators, a veterinarian, and at least one person with no ties to the institution, that is, a concerned citizen. This committee also performs inspections of laboratories and protocols. For research involving human subjects, an Institutional Review Board (IRB) ensures that proper guidelines are followed. Visit this site to view the NIH Guide for the Care and Use of Laboratory Animals. Blood Typing and Cross-Matching In addition to antibodies against bacteria and viruses to which they have previously been exposed, most individuals also carry antibodies against blood types other than their own. There are presently 33 immunologically important blood-type systems, many of which are restricted within various ethnic groups or rarely result in the production of antibodies. The most important and perhaps best known are the ABO and Rh blood groups (see Figure 3 in Hypersensitivities). When units of blood are being considered for transfusion, pretransfusion blood testing must be performed. For the blood unit, commercially prepared antibodies against the A, B, and Rh antigens are mixed with red blood cells from the units to initially confirm that the blood type on the unit is accurate. Once a unit of blood has been requested for transfusion, it is vitally important to make sure the donor (unit of blood) and recipient (patient) are compatible for these crucial antigens. In addition to confirming the blood type of the unit, the patient’s blood type is also confirmed using the same commercially prepared antibodies to A, B, and Rh. For example, as shown in Figure 7, if the donor blood is A-positive, it will agglutinate with the anti-A antiserum and with the anti-Rh antiserum. If no agglutination is observed with any of the sera, then the blood type would be O-negative. Following determination of the blood type, immediately prior to releasing the blood for transfusion, a cross-match is performed in which a small aliquot of the donor red blood cells are mixed with serum from the patient awaiting transfusion. If the patient does have antibodies against the donor red blood cells, hemagglutination will occur. To confirm any negative test results and check for sensitized red blood cells, Coombs’ reagent may be added to the mix to facilitate visualization of the antibody-red blood cell interaction. Under some circumstances, a minor cross-match may be performed as well. In this assay, a small aliquot of donor serum is mixed with patient red blood cells. This allows the detection of agglutinizing antibodies in the donor serum. This test is rarely necessary because transfusions generally use packed red blood cells with most of the plasma removed by centrifugation. Red blood cells have many other antigens in addition to ABO and Rh. While most people are unlikely to have antibodies against these antigens, women who have had multiple pregnancies or patients who have had multiple transfusions may have them because of repeated exposure. For this reason, an antibody screen test is used to determine if such antibodies are present. Patient serum is checked against commercially prepared, pooled, type O red blood cells that express these antigens. If agglutination occurs, the antigen to which the patient is responding must be identified and determined not to be present in the donor unit. Figure 7. This sample of a commercially produced “bedside” card enables quick typing of both a recipient’s and donor’s blood before transfusion. The card contains three reaction sites or wells. One is coated with an anti-A antibody, one with an anti-B antibody, and one with an anti-Rh antibody. Agglutination of red blood cells in a given site indicates a positive identification of the blood antigens: in this case, A and Rh antigens for blood type A-positive. THINK ABOUT IT If a patient’s blood agglutinates with anti-B serum, what is the patient’s blood type? What is a cross-match assay, and why is it performed? Table 1 summarizes the various kinds of agglutination assays discussed in this section. Table 1. Mechanisms of Select Antibody-Antigen Assays Type of Assay Agglutination Hemagglutination Mechanism Example Direct: Antibody is used to clump bacterial cells or other large structures Serotyping bacteria Indirect: Latex beads are coupled with antigen or antibody to look for antibody or antigen, respectively, in patient serum Confirming the presence of rheumatoid factor (IgM-binding Ig) in patient serum Direct: Some bacteria and viruses cross-link red blood cells and clump them together Diagnosing influenza, mumps, and measles Direct Coombs’ test (DAT): Detects nonagglutinating antibodies or complement proteins on red blood cells in vivo Checking for maternal antibodies binding to neonatal red blood cells Indirect Coombs’ test (IAT): Screens an individual for antibodies against red blood cell antigens (other than the A and B antigens) that are unbound in a patient’s serum in vitro Performing pretransfusion blood testing Viral hemagglutination inhibition: Uses antibodies from a patient to inhibit viral agglutination Diagnosing various viral diseases by the presence of patient antibodies against the virus Blood typing and cross-matching: Detects ABO, Rh, and minor antigens in the blood Matches donor blood to recipient immune requirements KEY CONCEPTS AND SUMMARY Antibodies can agglutinate cells or large particles into a visible matrix. Agglutination tests are often done on cards or in microtiter plates that allow multiple reactions to take place side by side using small volumes of reagents. Using antisera against certain proteins allows identification of serovars within species of bacteria. Detecting antibodies against a pathogen can be a powerful tool for diagnosing disease, but there is a period of time before patients go through seroconversion and the level of antibodies becomes detectable. Agglutination of latex beads in indirect agglutination assays can be used to detect the presence of specific antigens or specific antibodies in patient serum. The presence of some antibacterial and antiviral antibodies can be confirmed by the use of the direct Coombs’ test, which uses Coombs’ reagent to cross-link antibodies bound to red blood cells and facilitate hemagglutination. Some viruses and bacteria will bind and agglutinate red blood cells; this interaction is the basis of the direct hemagglutination assay, most often used to determine the titer of virus in solution. Neutralization assays quantify the level of virus-specific antibody by measuring the decrease in hemagglutination observed after mixing patient serum with a standardized amount of virus. Hemagglutination assays are also used to screen and cross-match donor and recipient blood to ensure that the transfusion recipient does not have antibodies to antigens in the donated blood. MULTIPLE CHOICE We use antisera to distinguish between various ________ within a species of bacteria. a. isotypes b. serovars c. subspecies d. lines Show Answer When using antisera to characterize bacteria, we will often link the antibodies to ________ to better visualize the agglutination. a. latex beads b. red blood cells c. other bacteria d. white blood cells Show Answer The antibody screening test that is done along with pretransfusion blood typing is used to ensure that the recipient a. does not have a previously undetected bacterial or viral infection. b. is not immunocompromised. c. actually does have the blood type stated in the online chart. d. is not making antibodies against antigens outside the ABO or Rh systems. Show Answer The direct Coombs’ test is designed to detect when people have a disease that causes them to a. have an excessively high fever. b. quit making antibodies. c. make too many red blood cells. d. produce antibodies that bind to their own red blood cells. Show Answer Viral hemagglutination assays only work with certain types of viruses because a. the virus must be able to cross-link red blood cells directly. b. the virus must be able to lyse red blood cells. c. the virus must not be able to lyse red blood cells. d. other viruses are too dangerous to work with in a clinical lab setting. Show Answer FILL IN THE BLANK In the major cross-match, we mix ________ with the donor red blood cells and look for agglutination. Show Answer Coombs’ reagent is an antiserum with antibodies that bind to human ________. Show Answer THINK ABOUT IT 1. Explain why the titer of a direct hemagglutination assay is the highest dilution that still causes hemagglutination, whereas in the viral hemagglutination inhibition assay, the titer is the highest dilution at which hemagglutination is not observed. 2. Why would a doctor order a direct Coombs’ test when a baby is born with jaundice? CRITICAL THINKING When shortages of donated blood occur, O-negative blood may be given to patients, even if they have a different blood type. Why is this the case? If O-negative blood supplies were depleted, what would be the next-best choice for a patient with a different blood type in critical need of a transfusion? Explain your answers. 1. Lancefield, Rebecca C., "The Antigenic Complex of Streptococcus haemoliticus. I. Demonstration of a Type-Specific Substance in Extracts of Streptococcus haemolyticus," The Journal of Experimental Medicine 47, no. 1 (1928): 91-103. ↵ LICENSES AND ATTRIBUTIONS Previous Next
Purchase answer to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Explanation & Answer

View attached explanation and answer. Let me know if you have any questions.Hey buddy, here is the answer:In case of any questions or edit, just let me know and I will clarify it ASAP.Have a niec time.

Hemagglutination Assay Assignment
1) For the data on slide 7, present a table of results (+, +/-, -) in table form. (See slide 20
for an example of this type of table.) Include the titer for each sample. Describe whether
any of the samples show a prozone effect.
Interpretation of results (settling patterns):
Positive: A smooth mat of agglutinated cells covering the bottom of the tube (+).
Negative: A clearly defined button in the bottom of the tube (-).
Intermediate: Incomplete settling of cells with no clearly defined button (+/-).
2
4
8
16
32
64
128
256
1

+

+

+

+

+

+

+

-

2

+

+

+

+

+

-

-

-

3

+

+

+

+

+

+

+/-

-

4

-

-

-

-

-

-

-

-

5

-

-

-

-

-

-

-

-

6

+

+

+

+

-

-

-

-

7

-

-

-

-

-

-

-

-

8

+

+

+

+

+

-

-

-

9

-

+/-

+/-

+

+

+

+

-

10

-

-

-

-

-

-

-

-

+C

+

+

+

+

-

-

-

-

CC

-

-

-

-

-

-

-

Sample 9 shows a prozone effect. This is because the hemagglutination process seems
to be inhibited at initial dilutions, i.e., ½ and ¼, of the virus, meaning the antigens

from the virus may be at very high levels thus impairing the adsorption to the red
blood cells.
2) For the data on slide 13, present a table of results (+, +/-, -) in table form. Include the
titer for each sample. Describe whether any of the samples show a prozone effect.
Interpretation of results (settling patterns):
Positive: A clearly defined button in the bottom of the tube (+).
Negative: A smooth mat of agglutinated cells covering the bottom of the tube (-).
Intermediate: Incomplete settling of cells with no clearly defined button (+/-).
2

4

8

16

32

64

128

256

1

+

+

+

+

+

+

-

-

2

+

+

+

+

+

-

-

-

3

+

+

+

+

-

-

-

-

4

+

+
...

Related Tags