Security Against Denial of Service Attacks Discussion

User Generated

U124

Computer Science

Description

The deliverables of the report should include:

  1. A report with the following sections.
    • a.Abstract: summary of problem statement presented in the papers.
    • b.Introduction: discuss the chosen papers proposed solution. These should be illustrated using text and diagrams.
    • c.Taxonomy: classification of the papers proposed solution and comparison between them.
    • d.State-of-the-art: includes the existing solutions (mechanisms, protocols, procedures, standards, etc.)
    • e.Discussion: The student must criticize the proposed solution. It is highly recommended to propose a possible solution or alternative for some of the weaknesses of the chosen papers wherever that is possible.  
    • f.References: The citation should follow the APA style.  
  2. The template of the article can be found in:

https://www.ieee.org/content/dam/ieee-org/ieee/web/org/conferences/conference-template-a4.docx

Subject is " Security against Denial-of-Service Attacks "

Unformatted Attachment Preview

Paper Title* (use style: paper title) *Note: Sub-titles are not captured in Xplore and should not be used line 1: 1st Given Name Surname line 2: dept. name of organization (of Affiliation) line 3: name of organization (of Affiliation) line 4: City, Country line 5: email address or ORCID line 1: 2nd Given Name Surname line 2: dept. name of organization (of Affiliation) line 3: name of organization (of Affiliation) line 4: City, Country line 5: email address or ORCID line 1: 3rd Given Name Surname line 2: dept. name of organization (of Affiliation) line 3: name of organization (of Affiliation) line 4: City, Country line 5: email address or ORCID line 1: 4th Given Name Surname line 2: dept. name of organization (of Affiliation) line 3: name of organization (of Affiliation) line 4: City, Country line 5: email address or ORCID line 1: 5th Given Name Surname line 2: dept. name of organization (of Affiliation) line 3: name of organization (of Affiliation) line 4: City, Country line 5: email address or ORCID line 1: 6th Given Name Surname line 2: dept. name of organization (of Affiliation) line 3: name of organization (of Affiliation) line 4: City, Country line 5: email address or ORCID Abstract—This electronic document is a “live” template and already defines the components of your paper [title, text, heads, etc.] in its style sheet. *CRITICAL: Do Not Use Symbols, Special Characters, Footnotes, or Math in Paper Title or Abstract. (Abstract) Keywords—component, formatting, style, styling, insert (key words) I. INTRODUCTION (HEADING 1) This template, modified in MS Word 2007 and saved as a “Word 97-2003 Document” for the PC, provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. All standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout a conference proceedings. Margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. Some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. The formatter will need to create these components, incorporating the applicable criteria that follow. II. EASE OF USE A. Selecting a Template (Heading 2) First, confirm that you have the correct template for your paper size. This template has been tailored for output on the A4 paper size. If you are using US letter-sized paper, please close this file and download the Microsoft Word, Letter file. B. Maintaining the Integrity of the Specifications The template is used to format your paper and style the text. All margins, column widths, line spaces, and text fonts are prescribed; please do not alter them. You may note peculiarities. For example, the head margin in this template measures proportionately more than is customary. This measurement and others are deliberate, using specifications that anticipate your paper as one part of the entire proceedings, Identify applicable funding agency here. If none, delete this text box. XXX-X-XXXX-XXXX-X/XX/$XX.00 ©20XX IEEE and not as an independent document. Please do not revise any of the current designations. III. PREPARE YOUR PAPER BEFORE STYLING Before you begin to format your paper, first write and save the content as a separate text file. Complete all content and organizational editing before formatting. Please note sections A-D below for more information on proofreading, spelling and grammar. Keep your text and graphic files separate until after the text has been formatted and styled. Do not use hard tabs, and limit use of hard returns to only one return at the end of a paragraph. Do not add any kind of pagination anywhere in the paper. Do not number text heads-the template will do that for you. A. Abbreviations and Acronyms Define abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title or heads unless they are unavoidable. B. Units • Use either SI (MKS) or CGS as primary units. (SI units are encouraged.) English units may be used as secondary units (in parentheses). An exception would be the use of English units as identifiers in trade, such as “3.5-inch disk drive”. • Avoid combining SI and CGS units, such as current in amperes and magnetic field in oersteds. This often leads to confusion because equations do not balance dimensionally. If you must use mixed units, clearly state the units for each quantity that you use in an equation. • Do not mix complete spellings and abbreviations of units: “Wb/m2” or “webers per square meter”, not “webers/m2”. Spell out units when they appear in text: “. . . a few henries”, not “. . . a few H”. • Use a zero before decimal points: “0.25”, not “.25”. Use “cm3”, not “cc”. (bullet list) C. Equations The equations are an exception to the prescribed specifications of this template. You will need to determine whether or not your equation should be typed using either the Times New Roman or the Symbol font (please no other font). To create multileveled equations, it may be necessary to treat the equation as a graphic and insert it into the text after your paper is styled. Number equations consecutively. Equation numbers, within parentheses, are to position flush right, as in (1), using a right tab stop. To make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Italicize Roman symbols for quantities and variables, but not Greek symbols. Use a long dash rather than a hyphen for a minus sign. Punctuate equations with commas or periods when they are part of a sentence, as in: a+b = () Note that the equation is centered using a center tab stop. Be sure that the symbols in your equation have been defined before or immediately following the equation. Use “(1)”, not “Eq. (1)” or “equation (1)”, except at the beginning of a sentence: “Equation (1) is . . .” D. Some Common Mistakes • The word “data” is plural, not singular. • The subscript for the permeability of vacuum 0, and other common scientific constants, is zero with subscript formatting, not a lowercase letter “o”. • In American English, commas, semicolons, periods, question and exclamation marks are located within quotation marks only when a complete thought or name is cited, such as a title or full quotation. When quotation marks are used, instead of a bold or italic typeface, to highlight a word or phrase, punctuation should appear outside of the quotation marks. A parenthetical phrase or statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (A parenthetical sentence is punctuated within the parentheses.) • A graph within a graph is an “inset”, not an “insert”. The word alternatively is preferred to the word “alternately” (unless you really mean something that alternates). • Do not use the word “essentially” to mean “approximately” or “effectively”. • In your paper title, if the words “that uses” can accurately replace the word “using”, capitalize the “u”; if not, keep using lower-cased. • Be aware of the different meanings of the homophones “affect” and “effect”, “complement” and “compliment”, “discreet” and “discrete”, “principal” and “principle”. • Do not confuse “imply” and “infer”. • The prefix “non” is not a word; it should be joined to the word it modifies, usually without a hyphen. • There is no period after the “et” in the Latin abbreviation “et al.”. • The abbreviation “i.e.” means “that is”, and the abbreviation “e.g.” means “for example”. An excellent style manual for science writers is [7]. IV. USING THE TEMPLATE After the text edit has been completed, the paper is ready for the template. Duplicate the template file by using the Save As command, and use the naming convention prescribed by your conference for the name of your paper. In this newly created file, highlight all of the contents and import your prepared text file. You are now ready to style your paper; use the scroll down window on the left of the MS Word Formatting toolbar. A. Authors and Affiliations The template is designed for, but not limited to, six authors. A minimum of one author is required for all conference articles. Author names should be listed starting from left to right and then moving down to the next line. This is the author sequence that will be used in future citations and by indexing services. Names should not be listed in columns nor group by affiliation. Please keep your affiliations as succinct as possible (for example, do not differentiate among departments of the same organization). 1) For papers with more than six authors: Add author names horizontally, moving to a third row if needed for more than 8 authors. 2) For papers with less than six authors: To change the default, adjust the template as follows. a) Selection: Highlight all author and affiliation lines. b) Change number of columns: Select the Columns icon from the MS Word Standard toolbar and then select the correct number of columns from the selection palette. c) Deletion: Delete the author and affiliation lines for the extra authors. B. Identify the Headings Headings, or heads, are organizational devices that guide the reader through your paper. There are two types: component heads and text heads. Component heads identify the different components of your paper and are not topically subordinate to each other. Examples include Acknowledgments and References and, for these, the correct style to use is “Heading 5”. Use “figure caption” for your Figure captions, and “table head” for your table title. Run-in heads, such as “Abstract”, will require you to apply a style (in this case, italic) in addition to the style provided by the drop down menu to differentiate the head from the text. Text heads organize the topics on a relational, hierarchical basis. For example, the paper title is the primary text head because all subsequent material relates and elaborates on this one topic. If there are two or more sub-topics, the next level head (uppercase Roman numerals) should be used and, conversely, if there are not at least two sub-topics, then no subheads should be introduced. Styles named “Heading 1”, “Heading 2”, “Heading 3”, and “Heading 4” are prescribed. C. Figures and Tables a) Positioning Figures and Tables: Place figures and tables at the top and bottom of columns. Avoid placing them in the middle of columns. Large figures and tables may span across both columns. Figure captions should be below the figures; table heads should appear above the tables. Insert figures and tables after they are cited in the text. Use the abbreviation “Fig. 1”, even at the beginning of a sentence. TABLE I. Table Head copy TABLE TYPE STYLES Table Column Head Table column subhead Subhead Subhead a More table copy a. Number footnotes separately in superscripts. Place the actual footnote at the bottom of the column in which it was cited. Do not put footnotes in the abstract or reference list. Use letters for table footnotes. Unless there are six authors or more give all authors’ names; do not use “et al.”. Papers that have not been published, even if they have been submitted for publication, should be cited as “unpublished” [4]. Papers that have been accepted for publication should be cited as “in press” [5]. Capitalize only the first word in a paper title, except for proper nouns and element symbols. For papers published in translation journals, please give the English citation first, followed by the original foreignlanguage citation [6]. Sample of a Table footnote. (Table footnote) Fig. 1. Example of a figure caption. (figure caption) Figure Labels: Use 8 point Times New Roman for Figure labels. Use words rather than symbols or abbreviations when writing Figure axis labels to avoid confusing the reader. As an example, write the quantity “Magnetization”, or “Magnetization, M”, not just “M”. If including units in the label, present them within parentheses. Do not label axes only with units. In the example, write “Magnetization (A/m)” or “Magnetization {A[m(1)]}”, not just “A/m”. Do not label axes with a ratio of quantities and units. For example, write “Temperature (K)”, not “Temperature/K”. [1] [2] [3] [4] [5] [6] ACKNOWLEDGMENT (Heading 5) The preferred spelling of the word “acknowledgment” in America is without an “e” after the “g”. Avoid the stilted expression “one of us (R. B. G.) thanks ...”. Instead, try “R. B. G. thanks...”. Put sponsor acknowledgments in the unnumbered footnote on the first page. REFERENCES The template will number citations consecutively within brackets [1]. The sentence punctuation follows the bracket [2]. Refer simply to the reference number, as in [3]—do not use “Ref. [3]” or “reference [3]” except at the beginning of a sentence: “Reference [3] was the first ...” We suggest that you use a text box to insert a graphic (which is ideally a 300 dpi TIFF or EPS file, with all fonts embedded) because, in an MSW document, this method is somewhat more stable than directly inserting a picture. To have non-visible rules on your frame, use the MSWord “Format” pull-down menu, select Text Box > Colors and Lines to choose No Fill and No Line. [7] G. Eason, B. Noble, and I. N. Sneddon, “On certain integrals of Lipschitz-Hankel type involving products of Bessel functions,” Phil. Trans. Roy. Soc. London, vol. A247, pp. 529–551, April 1955. (references) J. Clerk Maxwell, A Treatise on Electricity and Magnetism, 3rd ed., vol. 2. Oxford: Clarendon, 1892, pp.68–73. I. S. Jacobs and C. P. Bean, “Fine particles, thin films and exchange anisotropy,” in Magnetism, vol. III, G. T. Rado and H. Suhl, Eds. New York: Academic, 1963, pp. 271–350. K. Elissa, “Title of paper if known,” unpublished. R. Nicole, “Title of paper with only first word capitalized,” J. Name Stand. Abbrev., in press. Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, “Electron spectroscopy studies on magneto-optical media and plastic substrate interface,” IEEE Transl. J. Magn. Japan, vol. 2, pp. 740–741, August 1987 [Digests 9th Annual Conf. Magnetics Japan, p. 301, 1982]. M. Young, The Technical Writer’s Handbook. Mill Valley, CA: University Science, 1989. IEEE conference templates contain guidance text for composing and formatting conference papers. Please ensure that all template text is removed from your conference paper prior to submission to the conference. Failure to remove template text from your paper may result in your paper not being published.
Purchase answer to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Explanation & Answer

View attached explanation and answer. Let me know if you have any questions.

Name
Institution
Outline on Security against Denial-of-Service Attacks
1.
2.

3.
4.
5.

6.

1st Paragraph
• Abstract
2nd to 6th Paragraphs
• Introduction
a) Prevent Spoofing
b) Monitor the Network
c) Streamlining Incident Response
d) Limiting Broadcasting
th
7 to 9th Paragraphs
• Taxonomy
10th Paragraph
• State of the Art
11th to 13th Paragraphs
• Discussion
a) Endpoint Security
b) Network detection and alert
c) Dial in Firewalls
15th Paragraph
• Conclusion


Security against Denial-of-Service Attacks
*Note: Sub-titles are not captured in Xplore and should not be used

line 1: 1st Given Name Surname
line 2: dept. name of organization
(of Affiliation)
line 3: name of organization
(of Affiliation)
line 4: City, Country
line 5: email address or ORCID

line 1: 2nd Given Name Surname
line 2: dept. name of organization
(of Affiliation)
line 3: name of organization
(of Affiliation)
line 4: City, Country
line 5: email address or ORCID

line 1: 3rd Given Name Surname
line 2: dept. name of organization
(of Affiliation)
line 3: name of organization
(of Affiliation)
line 4: City, Country
line 5: email address or ORCID

line 1: 4th Given Name Surname
line 2: dept. name of organization
(of Affiliation)
line 3: name of organization
(of Affiliation)
line 4: City, Country
line 5: email address or ORCID

line 1: 5th Given Name Surname
line 2: dept. name of organization
(of Affiliation)
line 3: name of organization
(of Affiliation)
line 4: City, Country
line 5: email address or ORCID

line 1: 6th Given Name Surname
line 2: dept. name of organization
(of Affiliation)
line 3: name of organization
(of Affiliation)
line 4: City, Country
line 5: email address or ORCID

I. ABSTRACT
DoS attacks often send increased traffic to a network,
thus rendering the services useless or unavailable to users.
In this paper, I analyze the four proposed solutions used to
ensure security against DoS attacks. However, these
solutions have limitations. Thus, alternative solutions are
also offered for users to guarantee safety. Based on state of
the art, the four proposed solutions are arranged based on
their use while protecting against DoS attacks. In this paper,
I will provide insight on how users can limit the number of
attacks based on network traffic, thus ensuring protection
against hackers with the intent of rendering services
unavailable. In this paper, DoS attacks are explored, and
users are provided with measures to enhance their security.
There exist various ways in which DoS attacks can be
orchestrated. Security measures against DoS attacks utilize
the multiple methods in which DoS attacks can be launched
on a network. For instance, spoofing is one of the main
ways hackers can launch an attack on a network; hence the
user can prevent spoofing. Other prevention techniques such
as monitoring the network and streamlining incident reports.
These proposed solutions are aimed at assisting users in
preventing DoS attacks.
Keywords – Denial of Service attacks, Spoofing, Network
Traffic, Incident Response, Broadcasting, network
detection and response (NDR), Endpoint security, Dial-in
Firewall, security against DoS, incident planning,
network, user.
II. INTRODUCTION
A denial-of-service attack is an act of overloading a
network, thus rendering it useless or unavailable. An
attacker can achieve this by sending more traffic than the

XXX-X-XXXX-XXXX-X/XX/$XX.00 ©20XX IEEE

target can handle, thus making it crash. After crashing, the
host will be unable to render normal services to the user and,
therefore, the name denial of service. A good example is
that the target may include websites, emails, and other
services that a network usually relies on. A DoS attack takes
place when a user is unable to assess the services of a
network due to the actions of an attacker. Such attacks have
been known to cost organizations and bus...


Anonymous
Awesome! Perfect study aid.

Studypool
4.7
Indeed
4.5
Sitejabber
4.4

Similar Content

Related Tags