Momentum Lab, physics homework help

User Generated

cnhyn5

Science

Description

Momentum Lab - Physics Write-up

Unformatted Attachment Preview

Lab Assignment: Momentum Laboratory: Introduction This lab demonstrates conservation of momentum. Momentum is the product of the mass and velocity of a moving object. Studying momentum helps physicists understand the relationship between the motions of two interacting objects. • • • • First, design an experiment you could construct that might measure conservation of momentum. What materials would you use? What would you measure? What results would you expect? What if the results were different; what would that indicate? Write down your answers; this information will be a part of your lab write-up that you submit to your teacher. Lab Assignment: Momentum Laboratory: Description Developing a Hypothesis: In this experiment, you will study the momentum of two balls with various masses. The balls will be pushed toward each other and undergo either elastic or inelastic collisions. You will set the mass and velocity of the balls prior to the collision in order to compare the momentum before and after the balls move apart. • • Create hypotheses of what you think the results of this experiment will be. How will the momentum of the balls change before and after the collision? What differences can you expect between inelastic and elastic collisions? Defend your hypotheses with your knowledge of momentum. Your answers will be a part of your lab write-up that you submit to your teacher. Objectives: 1. Generate data for both elastic and inelastic collisions 2. Calculate the momentum of each object in different collisions 3. Evaluate data to verify the law of conservation of momentum. To view the items that need to be included in your lab write-up along with a grading rubric, please refer to the Guidelines for the Laboratory section in the orientation. Lab Assignment: Momentum Laboratory: Procedure Preparation 1. Read the entire lab procedure and plan the steps you will take. 2. The virtual lab can be found at https://phet.colorado.edu/en/simulation/collision-lab. You will see a screen with two balls, and two boxes. The green box on the side contains various labels and the control for the amount of elasticity in a collision. The yellow box at the bottom allows you to control the initial conditions of the collisions. Spend some time playing with the virtual lab to become familiar with it. In the green box, click Show Values. You can adjust the speed of the red ball by clicking on the circled V at the end of the velocity arrow and making it longer or shorter. You can adjust the mass of the balls by using the sliders in the box at the bottom. Hit the Play button to begin moving the red ball. Hit the Pause button once the collision has taken place. 3. Prepare two data tables in your spreadsheet program. Table 1 is for trials in which the collisions are elastic. Label columns: Trial, m1 (kg), m2 (kg), v1,i (m/s), v2,i (m/s), v1,f (m/s), and v2,f (m/s). In the first column number trials 1 through 10. Table 2 is for trials in which the collisions are inelastic. Label columns: Trial, m1 (kg), m2(kg), v1,i (m/s), v2,i (m/s), and vf (m/s). In the first column number trials 1 through 10. Elastic Collisions 1. Slide the elasticity bar in the green to the right so that it is 100% elastic. Also make sure that the velocity vector box at the top of the box is chosen. 2. Select the More Data button at the bottom. Input the following values: m 1 = 0.5 kg, p1 = 0, v1,i = 0.2 m/s, m2= 0.5 kg, p2 = 1, and v2,i = 0 m/s. Record these values in your data table. Select the play button. Observe the balls collide, and record their final velocities in your data table. Press the Pause button after the balls have colided. 3. Press the blue restart button. Change the mass of one of the balls by typing in a number in one of the white boxes labeled Mass. Repeat the experiment. Change the mass of the other ball, and repeat the experiment. Change the initial velocities of both balls, and repeat the experiment. Notice that positive movement is to the right and negative movement is to the left. Continue changing initial conditions until you have tried at least ten different types of initial conditions. You might want to try to make the balls behave in different ways like both stopping after the collision or both moving in the same direction after the collision. Be careful to note that the initial values you input are accepted by the virtual laboratory. If the balls will not collide given your choices, the laboratory will return to default settings. Inelastic Collisions 1. Slide the elasticity bar in the green to the left so that it is 0% elastic. Also make sure that the velocity vector box at the top of the box is chosen. 2. Copy the initial conditions that you used to study elastic collisions in your second data table. Repeat the trials for inelastic conditions. Record the values of vf in your second data table. Lab Assignment: Momentum Laboratory: Analysis 1. Organizing Data: For each trial under elastic conditions, calculate the momentum of each ball before the collision and after the collision by multiplying its mass by its velocity. Remember that velocity and momentum are vectors, so the sign of the value is important in your calculations. You may want to add columns to your data tables or build new tables in your spreadsheet for these calculations. 2. Organizing Data: For each trial under elastic conditions, find the total momentum of the two balls before the collision and after the collision. 3. Organizing Data: For each trial under inelastic conditions, find the momentum of each of the two balls before the collision and momentum of the joined balls after the collision. Lab Assignment: Momentum Laboratory: Conclusion 1. 2. 3. 4. 5. Drawing Conclusions: In this situation, conservation of velocity would mean that the total velocity for both balls is the same after the collision as it was before the collision. Is velocity conserved in elastic conditions? Is it conserved in inelastic conditions? Support your answer with data from your experiment. Drawing conclusions: Based on your data, is momentum conserved in elastic conditions? Support your answer with data from the experiment. Drawing Conclusions: Based on your data, is momentum conserved in inelastic conditions? Support your answer with data from the experiment. Making Predictions: How did the results from your data compare with your hypothesis? Evaluating Methods: How would performing this experiment in a hands-on laboratory affect the data you collected? What sources of error could you expect in real-life conditions that you could neglect in a virtual setting? The lab report that you submit to your teacher should include: 1. A document file containing: -Your experimental design idea and answers to the initial questions -Your hypothesis about this experiment supported with physics concepts -Conclusions from this experiment 2. Copy the following spreadsheet information into your document: -Data tables 1 and 2 -All of the tables you produced to do your calculations of initial and final momentum for the measurements in tables 1 and 2
Purchase answer to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Explanation & Answer

Here is the solution of your lab.

Experimental Design:
In order to demonstrate conservation of momentum the design apparatus used is 1
dimensional line with polished surface and different radius spherical balls.


What materials would you use?
Polished tables with narrow lanes, different mass spherical balls, flow measuring device for
measuring velocity, weighing machines



What would you measure?
Velocity of masses before and after the collision, mass of the spherical balls



What results would you expect?
Results expected are momentum of individual balls before and after the collision, total
momentum before collision and momentum after collision. It is expected that total
momentum before and after collision is equal.



What if the results were different; what would that indicate?
If the results of total momentum before and after momentum is not equal than and this
difference can not be explained by attenuating factor such as friction or air resistance. Than it
means that the theory of principal of conservation of momentum is incorrect and doesn’t hold
true.

Hypothesis
Salient points of hypotheses of what you think the results of this experiment will be.


How will the momentum of the balls change before and after the collision?
The momentum of balls will change in such ...


Anonymous
Just what I needed…Fantastic!

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4

Related Tags