Time remaining:
brake replacement

Other
Tutor: None Selected Time limit: 0 Hours

I would like to replace brakes for my 73 chevy c-30 Balboa

Nov 20th, 2013
How do you install brake pads on chevy cavalier


Answer Prep:
1 Pop the hood and take off the brake fluid reservoir top( this will allow the caliper piston to be pushed back) Tools: Large Allen wrench, med/large flat-head screw driver, STAR attachment Assuming that you know how to take to tire off: For the front left, turn the wheel all the way to the left ( help you get a better view) place a flat head screw driver between the rotor and the old brake pad, this make take a few mins. but your goal is to push the piston back so that it is flush or as far back as it can go.

2 Next, you are looking for 2 bolts these are hex bolts (they are not hex bolts. They are *STAR* bolts that are shaped like an asterisk* and require a special star tool you can get at any automotive parts store), unscrew the bolts and remove the caliper from
around the rotor. The pad closest to the engine of the car just pops out of the piston ( the hollow circle that you pushed back) the other pad will take a little prying with your flat head screwdriver, but it is relatively easy to take off as well.

3 Next Simply replace the old pads with the new ones. When installing the new pads ensure that the shape of the pad is angled in the same way as the rotor. Finally, place the caliper back on the rotor and tighten the screws back up and replace the tire... be sure to put the cap back on the brake fluid reservoir Doing the right side is exactly the same with the exception of turning the wheel the opposite direction to get the best view.. ==a tip when trying to push the piston back on the brake calipers, is to take a small c clamp
and attach it to the caliper, leave the old inside brake pad in, to prevent damage to your piston, turn c clamp slowly, until piston bottoms out, and when replacing brake pads, a rule of the thumb is to have your rotors turned down, but its best to just replace them, since turning them down cost about 20 bucks, new ones cost about 30, and i never did have very good luck with turning them down, they seem to warp again!!
source
http://wiki.answers.com/Q/How_do_you_install_brake_pads_on_a_Chevy_Cavalier#slide1
Nov 20th, 2013

Studypool's Notebank makes it easy to buy and sell old notes, study guides, reviews, etc.
Click to visit
The Notebank
...
Nov 20th, 2013
...
Nov 20th, 2013
Dec 9th, 2016
check_circle
Mark as Final Answer
check_circle
Unmark as Final Answer
check_circle
Final Answer

Secure Information

Content will be erased after question is completed.

check_circle
Final Answer