Description
Based on the plans you created week 2 and 3, you will do the following work for the kitchen and the bath. You should have a well- dimensioned plan as per NKBA specifications. Make sure your plan has the elevation markers.
You will redraft your plan and add cabinet designations.-numbers. ***You can just add the selected cabinet numbers to your existing plans, but you need to make any corrections in cabinet sizes in drafting as needed. If your bath cabinets are free-standing vanity types, they will not be drafted or numbered as manufactured cabinets but would listed or specified as a selected product. Only if you are ordering manufactured, built-in cabinets from the cabinet company would the bath cabinets be drafted as such.
ADD specification symbols, (circled numbers), to the revised plan. Note in the NKBA video on plans that to the right side is a Legend of Specifications. Circled numbers represent selections. These can be appliances and fixtures and interior selections as trash cans and plate holders in drawers. This is how we know what cabinet accessories are where. Add this to your revised kitchen plan as you make the selections from the Woodmark catalogue.
You will be adding all numbers for cabinet selections to the kitchen elevations. Draft all 4 walls and an island, even if some walls do not have cabinets. Islands are a series of base cabinet boxes.
Based on the cabinet specification catalogue you have been given a link to, you will select the boxes of the appropriate size and label the plan with the appropriate size box as per the NKBA example. We will use the Woodmark catalogue. The Woodmark catalogue specifications link is in your week 5 module .
Then you will draft elevations for each wall in your kitchen as shown in the link describing how to do elevations per NKBA. You will dimension the boxes as indicated the video from Youtube.
So- there will be a plan with cabinet numbers and elevations for all elevations including the island elevations if you have an island. Make sure all labels and scales and names are included.
Materials-
You will select a wood, (this catalogue only gives you a few choices as Maple, painted, and their engineered product. You usually have a variety of wood choices and maybe an engineered product.( P. 37.)
The boxes are typically particle board, but ply as an upgrade is often offered. Few offer solid wood boxes, as they warp and can cost a lot more.
Note that modern cabinet doors are flat and called slab doors. Slab doors are typically a manufactured wood so that they do not warp. Panel doors are typically wood for the stiles and rails and plywood for the panel. The panel actually floats in the frame or stiles and rails so that it does not warp but can allow movement. On older cabinets, particularly painted ones, you see the cracking along the panel joint where the panel has moved a little in its frame.
You will select a door style and a finish- front part of catalogue. (They are not offering a lot of finishes in this catalogue, but that is fine.
Basic Cabinet information:
Framed vs frameless
You will note that this product is a framed cabinet. This line apparently does not offer a frameless, European style box. Some companies do not make both products. Usually this is so that they factory can keep costs down.
A frameless cabinet has a thicker back to hold it together, and the door must cover the whole front. Frameless cabinets also allow drawers to be a bit bigger. This looks more modern.
A framed cabinet is typically more traditional, though it can look contemporary. The front frame holds the box together, but the box still will have a thinner back. The frame takes up some drawer width. Here you have a choice of door overlays. See p. 48 in the catalogue for explanation and image.
Pricing basics
You will find that the more options a company offers, the more expensive the product will be.
Cabinets are prices basically on 2 factors, how many options are offered and the actual quality of the materials and work. Most reasonably priced cabinet lines can often offer a nice product if they offer limited options. This allows more of the product to be prefabricated and ready to ship. The most expensive lines may be all custom or offer that option. Custom work from a cabinet manufacturer just costs a lot more.
Different cabinets and price-lines come with different standard features, including drawer types. Many lines offer upgrades.
If you have cabinets “job-built” (built at the site), or built by the contractor’s trim carpenter and brought to the site, you can often get a nice product with custom details and sizes. Doors are typically made in the shop. As the associated designer, you would want to see previous work and make sure the work met all requirements and standards appropriate for the price. You would also need to make sure the painter could paint or stain the finished cabinets to your satisfaction. You would need to get a stain sample from the painter. There are a few more unknowns unless you have worked with the carpenter and painter often. This is a common practice in many areas and not so much in others. The factory finishes may be heat set and may be more acid resistant. It is a matter of preference, sometimes cost, sometimes desired customization, sometimes availability as to which you and your client choose.
Sizes- basically:
Cabinets standardly come in 3” increments, starting with 9” cabinets.
Non-custom cabinet companies use fillers, or narrow panels to fill in left over spaces.
You may need to specify panels in areas as at the sides of the ref. or double ovens. These take up several inches.
Remember you need to find out from your client what specific needs they have. It may be an extra-large pasta sauce pan or extra-large plates.
The catalogue gives clear diagrams with sizes indicating what cabinets come in what sizes and what options are offered.
Watch the short, short link to the video on plans provided this week to review the sizing conventions. Base cabinets start with “B”, and give width, depth is 24 unless specified and height is assumed at 34 and ¼ or equaling app 36”.
The upper cabinets are called “Wall cabinets” and start with W. they you have the width and height. W3021 is wall, 30”w, 21” high. X24 would be added if the depth were an un-standard 24” as over the ref. (See pages 80 in catalogue for dimensioning basics).
Go through the catalogue and get a feeling for the product specifications before doing the project.
I have selected this cabinet catalogue because it is available on line and fairly thorough in images and product information.
The companies that sell through more public companies as Home Depot seem to provide the most available information. So we will use the Woodmark products from their catalogue. Again, this selection is a matter of convenience and availability.
The following list of pages note major items or information you will want to read through and possibly use in your kitchen. There are brief explanations and pages to consult. Please carefully review the information until you understand it. This way you can consult and reference the pages as needed. Their catalogue has an index to help.
Pages to note for specific information.
Go through these cabinet specs and make sure you see, understand what they are telling you>
p. 35- their specs
p. 37- wood species and other manufactured cabinet body choices. Note explanation of Duraform.
p. 48- what overlay options are available for framed cabinets. Determines look and how much stile and rail or frame shows.
p. 50-51- construction options and legend.
p.54- void or dummy cabinet fronts or faces (as in front of sink)
p. 57- toe kick- you need to specify where the toe kick is as some sides do not need it. This might happen at the end of a run or on the sides of an island.
p. 58- custom closings- as soft close. Some clients do not want it and it does cost more usually unless that is indicated as included.
p. 67- glass or openings in cabinets. Choices of openings.
p. 73- how to read wall cabinets
width, height depth.
20” wide, 12”high is 2012. “W” is for wall. W2012 the depth will be indicated if it differs from standard.
Note flip up doors, wine racks, corner wall cabinets.
105- vent hoods- note there are vent hood liners, the actual vent inset that functions, and the wooden, decorative vent hood cover. If you purchase a separate, non -matching vent hood, it is a different story. This is for vent hood covers that match the cabinets, for traditional designs mostly.
P.111- Base cabinets, “B” indicates base
Height assumed 34-1/2 so not noted unless different., depth assumed 24” so gives door type as Butt for 2 doors. ( B12 -Butt would be base cabinet, 12” wide, 2 doors butted)
p. 113 accessories as insets, trash baskets…
119- sink and cooktop/stove cabinets
133- Base corner cabinets
The catalog also offers tall kitchen cabinets and various other options.
https://youtu.be/VIF8EZDYQ9k
https://youtu.be/tFMlggZOliU
Unformatted Attachment Preview
Specification Guide • Parts Directory
February 2017
FOR STORE USE ONLY. PROPERTY OF:
Welcome
This Guide has been formatted to make designing with our
cabinetry clear and easy. It contains complete and accurate
information for our Simply Woodmark™ products and an easy-toread format to make quick “look-ups” a snap.
If you would like further clarification about any of our products or
processes, please call your exclusive Home Depot Customer Care
Professional at 800-677-8182.
Continuous Improvement
In keeping with our policy of continuous product refinement,
Simply Woodmark™ reserves the right to change specifications in
design and materials as conditions require.
Please visit resources.woodmarkcabinetry.com for all your
designer needs.
New Items
The color orange is used to highlight items which are newly available or modified for your Simply Woodmark Cabinetry designs. All of
these items are color coded orange for easy identification and include:
Open Frame & Mullion Frame cabinets transition to Specialty Door (SD) cabinets
• Specialty Door cabinets require a specialty door selection (OFD or MFD) and feature Matching Interior (MI) standard
Decorative Glass Insert Revamp
• New Glass Inserts: Antiqued Afton, Antiqued Fincastle, Frosted Ash, Frosted Umber, Havana, Impression, Lucent, Mirror, Radiance,
Twilight & Woven
Discontinued Door Styles & Decorative Glass Inserts
• Sunbrook Cathedral
• Discontinued Glass Inserts: Alcove, Fern, Grid, Keswick, Oasis, Rice Paper & Tatting
3
Contents
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Door Style Collections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Sunbrook™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Clearfield® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Standard Cabinet Specifications . . . . . . . . . . . . . . . . . . . . 11
Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cabinet Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Finishing Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Wood Species & Materials . . . . . . . . . . . . . . . . . . . . . . . . . 15
Wall Cabinet Construction . . . . . . . . . . . . . . . . . . . . . . . . . 16
Base Cabinet Construction . . . . . . . . . . . . . . . . . . . . . . . . . 17
Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cabinet Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Installation Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Overlay Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Construction Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Legend & Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Inverted Frame and Recessed Toe Kick Option . . . . . . . . . . 27
Reduced Depth Option . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Increased Depth and Remove Dovetail Side-Glide Option . 29
Cabinet Front Only and Void Door Cabinet Option . . . . . . 30
Matching Interior Cabinet Option . . . . . . . . . . . . . . . . . . . 31
Specialty Door Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Mullion Frame and Open Frame Door Options . . . . . . . . . . 33
Decorative Glass Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Wall Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
With Spice Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Refrigerator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Wall Top Hinge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Microwave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Peninsula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Blind . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Blind Peninsula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Wall End Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Specialty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Range Hoods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Base Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Base With Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Full-Height Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Full-Height Base with Accessories . . . . . . . . . . . . . . . . . . . 83
Drawer Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Peninsula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Full-Height Peninsula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Sink/Range Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Sink/Range Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Base Cabinets (continued)
Sink Base with Factory Installed Accessories . . . . . . . . . . . 91
Blind Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Blind Peninsula Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Specialty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Desk and Office Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . 107
Desk Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Specialty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Bookshelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Tall Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Single Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Single Oven with Organizer . . . . . . . . . . . . . . . . . . . . . . . 121
Double Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Vanity Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Standard Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Base Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Full-Height Vanity Base . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Specialty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Vanity Linen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Universal Design Cabinets . . . . . . . . . . . . . . . . . . . . . . . . 143
Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Moldings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Moldings Stacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Moldings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Panels, Fillers & Decorative Items . . . . . . . . . . . . . . . . . . 171
Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Toe Kick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Decorative Matching Doors . . . . . . . . . . . . . . . . . . . . . . . 176
Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Decorative Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Valances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Corbels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Countertop Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Legs & Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Furniture Toe Kick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Installation Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Decorative Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199
Parts Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
Simply Woodmark Specification Guide
4
Consumer Lifetime Limited Warranty
Simply Woodmark™ Lifetime Limited Warranty
Additional Limitations and Disclaimers
The manufacturer of Simply Woodmark™ hereby warrants to
the original purchaser, for residential applications only, that all
Simply Woodmark cabinets and accessories are free from defects
in materials and workmanship. This warranty runs for as long
as you own your home and begins upon the date of delivery to
you. This warranty is expressly limited to repair or replacement
of the defective part at the discretion of Simply Woodmark, and
does not include labor for removal or replacement. This warranty
does not extend to defects caused by improper handling, storage,
installation, assembly or disassembly, intentional damage, product
modifications, exposure to the elements including humidity which
may result in warping or splitting, accidental misuse, abuse
or negligence.
THE MANUFACTURER OF SIMPLY WOODMARK MAKES NO
OTHER WARRANTIES OTHER THAN THOSE SET FORTH HEREIN
AND ALL OTHER WARRANTIES ARE HEREBY DISCLAIMED. THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE
LENGTH OF THE LIMITED WARRANTY PERIOD. THE LIMITED
WARRANTIES SET FORTH HEREIN ARE LIMITED TO THE FIRST AND
ORIGINAL BUYER AND ARE NOT TRANSFERABLE THEREAFTER. IN
NO EVENT SHALL THE MANUFACTURER OF SIMPLY WOODMARK
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES TO
THE PURCHASER OR TO ANY THIRD PARTY, INCLUDING, WITHOUT
LIMITATION, DAMAGES ARISING FROM PERSONAL INJURY, LOST
PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF PROPERTY,
ECONOMIC LOSSES, OR STATUTORY OR EXEMPLARY DAMAGES,
WHETHER FROM NEGLIGENCE, WARRANTY, STRICT LIABILITY OR
OTHERWISE. Some states do not allow the exclusion or limitation
of incidental or consequential damages, or limitations on how long
an implied warranty lasts, so the above limitations and exclusions
may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights, which vary from state to
state.
Natural woods may vary in texture, color and wood grain, and
exhibit subtle changes as they age. For example, wood joints may
eventually have visible cracking around the joint area and cabinet
colors may darken or lighten over time. Sunlight, smoke, moisture,
household cleaners and other environmental conditions may cause
materials to vary from their original color and/or to warp, split
or crack. These variations are considered to be the nature of the
material in relation to their environmental exposure and are not
covered under this warranty.
Claims
All claims for defective cabinets and accessories must be submitted
to Simply Woodmark in writing and must specify the defects
present in the cabinets and accessories. After Simply Woodmark
has had an opportunity to inspect the cabinets and accessories,
they will, at their discretion, either replace defective cabinets and
accessories or repair any defects in the cabinets and accessories.
All claims must be submitted to the following address: Simply
Woodmark Claims Department, Post Office Box 1980, Winchester,
Virginia 22604.
5
DOOR STYLES
Door Style Collections
Sunbrook
Sunbrook
Drawer Front
Large Drawer Front
Clearfield
Door Cross Section
Drawer Cross Section
Large Drawer Cross Section
6 DOOR STYLES: Sunbrook
Sunbrook
Door Style Details:
Species:
Hardwood
Door Description:
Raised Panel
DOOR STYLES
Door Rail & Stile Width:
Door
Door Cross Section
1 7⁄8”
Drawer Description:
Decorative Slab
Wall Door Style:
Square
Overlay:
Partial Overlay Door (POL)
Hinge:
Partial Overlay (POL) Hidden Hinge
Hardware:
Decorative Hardware Strongly Recommended
Construction Details:
HARDWOOD
Standard Drawer Front
Door Panel:
Veneer
Door Stile & Rail:
Solid Wood
Drawer Front:
Solid Wood
Standard Drawer Cross Section
Available Finishes:
Large Drawer Front
Large Drawer Cross Section
Specialty Doors (SD) Available for this Door Style:
See Page 32 for details and restrictions.
OFD
MFD
FINISH
CODE
Espresso
R1J
Honey
R1H
Nutmeg
R5V
Spice
R5S
Tawny
R1T
Wheat
R5H
DOOR STYLES: Sunbrook 7
Sunbrook
DoorCross
CrossSection
Section
Door
Door
Species:
Thermofoil
Door Description:
Raised Panel
Door Rail & Stile Width:
2 ¼”
Drawer Description:
Decorative Slab
Wall Door Style:
Square
Overlay:
Full Overlay Door (FOL)
Hinge:
Full Overlay (FOL) Hidden Hinge
Hardware:
Requires Decorative Hardware
Construction Details:
THERMOFOIL*
Drawer
Front Front
Standard
Drawer
Door Panel:
Thermofoil Wrapped MDF
Door Stile & Rail:
Thermofoil Wrapped MDF
Drawer Front:
Thermofoil Wrapped MDF
Drawer
Cross
Section
Standard
Drawer
Cross
Section
Available Finishes:
FINISH
CODE
White
I3W
*Doors and drawer fronts are Thermofoil wrapped - refer to page 13 for
cabinet box construction.
Large Drawer
Drawer Cross
Large
CrossSection
Section
Large Drawer
Large
DrawerFront
Front
Specialty Doors (SD) Available for this Door Style:
See Page 32 for details and restrictions.
OFD
MFD
Simply Woodmark Specification Guide
DOOR STYLES
Door Style Details:
8 DOOR STYLES: Clearfield
Clearfield
Door Style Details:
Species:
Hardwood
Door Description:
Flat Panel
DOOR STYLES
Door Rail & Stile Width:
Door Cross Section
Door
1 7⁄8”
Drawer Description:
Decorative Slab
Wall Door Style:
Square
Overlay:
Partial Overlay Door (POL)
Hinge:
Partial Overlay (POL) Hidden Hinge
Hardware:
Decorative Hardware Strongly Recommended
Construction Details:
HARDWOOD
Standard Drawer Front
Door Panel:
Veneer
Door Stile & Rail:
Solid Wood
Drawer Front:
Solid Wood
Standard Drawer Cross Section
Available Finishes:
Large Drawer Front
Large Drawer Cross Section
Specialty Doors (SD) Available for this Door Style:
See Page 32 for details and restrictions.
OFD
MFD
FINISH
CODE
Espresso
P1J
Honey
P1H
Nutmeg
P5V
Spice
P5S
Tawny
P1T
Wheat
P5H
DOOR STYLES
DOOR STYLES: Notes 9
Simply Woodmark Specification Guide
DOOR STYLES
10 DOOR STYLES: Notes
Standard Cabinet Specifications
STANDARD CABINET SPECS
11
STANDARD CABINET SPECS
12
STANDARD CABINET SPECIFICATIONS: Certification
KCMA Certified
All cabinetry manufactured by Simply Woodmark is certified by
the Kitchen Cabinet Manufacturers Association (KCMA).
KCMA sets the American National Standards Institute/KCMA
161.1- 2000 uniform performance and construction standards
for kitchen and vanity cabinets. The program is referenced by
U.S. Government Agencies; architects; builders; remodelers; and
other specifiers.
Cabinets that bear the KCMA seal of certification are recognized
as a quality product with the ability to perform after a rigorous
battery of tests, simulating years of typical household use. Tests
are performed by approved third-party independent laboratories.
Simply Woodmark is proud to display the KCMA seal of
certification for cabinet construction.
Environmentally
Responsible Stewardship
As a leading U.S. manufacturer of fine cabinetry, American
Woodmark Corporation is committed to conducting business in
a manner that both protects the environment and safeguards
public health and safety. To achieve this end, the company
proactively identifies potential environmental risks and monitors
compliance with appropriate federal, state, local and internal
standards.
The company has received certification by the Kitchen Cabinet
Manufacturers Association (KCMA) Environmental Stewardship
Program on all products. The certification was awarded based on
compliance across a broad range of activity including air quality,
product resource management, process resource management,
environmental stewardship and community relations.
The company works with all suppliers to encourage sustainable
forestry practices. Particle board and plywood are purchased
from suppliers that meet the Composite Panel Association
requirements for Environmentally Preferable Products including
formaldehyde emissions that comply with ANSI Standards.
The company uses leading edge technologies to limit both
hazardous and non-hazardous emissions, byproducts, and waste.
Ongoing, formal programs identify opportunities for recycling
and reusing materials. When waste ultimately requires disposal,
steps are taken to minimize the environmental impact.
The American Woodmark Foundation supports local programs
serving the community, including activities focused on
maintaining the quality of life.
Our company is dedicated to doing our part in the preservation
and sustainability of the environment.
Cabinet Front Face Frames
Tall and Universal Design Cabinet Shelves
Cabinet front face frames are made from ⁄4” x 1 ⁄8” solid
hardwood. They are kiln-dried to prevent warping and finished
with our BeautyGuard finishing system. Face frame joints are
pressure fitted, glued, double doweled and stapled.
3
5
Cabinet Side Panels
Cabinet side panels are 1⁄2’’ thick and made of engineered
wood with our rigorous multi-step TuffTech UV-cured finish;
exterior sides match cabinet finish and interior sides are Natural
Woodgrain. They are captured into a grooved front face frame
and secured using high-strength fasteners and glue.
®
Cabinet Tops, Bottoms and Floors
Tops, bottoms and floors are 1⁄2” thick and made from
engineered wood. They are finished with our TuffTech finishing
system. They are fitted and glued into the cabinet front face
frame grooves, then captured in the grooves of the cabinet side
panels.
Cabinet Back
Utility, Oven, Vanity Linen and all Universal Design cabinet
shelves are 3⁄4” thick engineered wood with our TuffTech
finishing system. Shelves are banded on one side with PVC
edge banding. All shelves are adjustable and meet KCMA load
standards of 15 pounds per square foot.
Drawer Systems
All drawers are 1⁄2” thick engineered wood or 5⁄8” thick
dovetail hardwood and have a printed MDF bottom finished
with our TuffTech finishing system. Base cabinets, Double
Ovens, Desk, Universal Design and 21” deep Vanities feature
18” drawers with side-mounted drawer glides. The 18” deep
Vanities will feature 15” deep drawers with side-mounted
drawer glides. The drawers meet KCMA load standards of 15
pounds per square foot.
Corner Blocks
Corner blocks are attached to help ensure cabinet squareness
and allow for proper countertop installation.
The cabinet back is made from 1⁄8” thick hardboard substrate.
The inside cabinet surface is finished with our TuffTech finishing
system.
Hinges
Hanging Rails
Inset toe kicks are made of 1⁄2” thick unfinished engineered
wood. Standard toe kick dimensions are 4” high and recessed
3 1⁄2”. Universal Design toe kick dimensions are 8” high and
recessed 6 1⁄2” deep.
The Base and Vanity top hanging rail is ⁄4” thick solid wood,
mortise and tenon joined and glued into the cabinet side
panels. The wall cabinet hanging rails are 1⁄2” thick engineered
wood, glued and pinned into the cabinet back, cabinet side
panels and top/bottom.
3
Standard Cabinet Shelves
Wall, Base, Desk and Vanity cabinet shelves are 1⁄2” thick
engineered wood with our TuffTech finishing system. Shelves
are banded on one side with PVC edge banding. All shelves are
adjustable and meet KCMA load standards of 15 pounds per
square foot.
Fully concealed Hidden Hinges are standard on all door styles.
®
Inset Toe Kick
BTK8 (matching toe kick) required for installation.
Continuous Improvement
In keeping with our policy of continuous product refinement,
Simply Woodmark reserves the right to change specifications in
design and materials as conditions require.
Simply Woodmark Specification Guide
STANDARD CABINET SPECS
STANDARD CABINET SPECIFICATIONS: Cabinet Specifications 13
STANDARD CABINET SPECS
14
Finishing Systems
Cabinet Care
The finishing systems used on our products are designed to
ensure the beauty and durability of our cabinetry. State-of-the-art
equipment allows precisesanding, filling and finish coverage of
each of our products.
Remove dust from cabinets frequently with a soft lint-free cloth.
The cloth may be slightly dampened with water or a spray type
dust remover. Wood and laminate cabinet surfaces may be
polished once every few months with a high quality, non-oilbased furniture polish. Do not use a paste wax type material.
Wax buildup is difficult to remove and will leave a residue that
attracts dust and moisture. Polishes containing silicon should not
be used. Clean spills immediately. Use a clean cloth and mild
soap if necessary. Wipe dry with a clean soft cloth. Do not use
detergents, citrus or ammonia based cleaners, steel wool, soap
pads or abrasive cleaners on cabinets.
BeautyGuard Finishing System
®
BeautyGuard is an extremely sophisticated and environmentally
responsible coating that offers durability, ease of cleaning and
water resistance. We use a combination of mechanical systems
to bring out the richness, luster and natural grain definition of
the wood, as well as computerized automation to ensure color
consistency and surface smoothness. Our BeautyGuard Finishing
System is a rigorous multi-step process that includes sanding,
brushing, cleaning, stain application, computerized oven drying
and a catalyzed topcoat to protect and beautify cabinets for
years to come.
TuffTech Finishing System
Our TuffTech Finishing System uses only 100% solids. This multistep panel finishing system begins with three sanding operations
followed by a top and bottom brush cleaning to provide a
smooth surface for material adhesion. Next, an ultraviolet (UV)
filler is cured using light ovens to seal the board completely.
Once again the board is sanded and a waterborne adhesion
material is applied and dried to provide an interlocking bond
with the water-based paints. Depending on the product, two
or three coats of paint are applied, dried and then covered
with an ultraviolet topcoat. This topcoat is made of acrylics and
urethane and acts as a sealant to protect the paint.
Environmentally Responsible Finishing
Our panel finishing system uses only water-based paints
and fillers, yielding neither hazardous waste nor water
contamination. Our acrylic and urethane materials are
100% solids, dried using high intensity lights, yielding no
atmospheric emissions. Our products are extremely resistant
to stains and surface damage that can be caused by common
household chemicals. Our products exceed KCMA and ANSI
standards for resistance to stains like coffee, grape juice
and moisture.
Extra care should be taken that cabinet finishes are not exposed
to heat in excess of 200° Fahrenheit (174° for thermofoil door
styles). Do not place or mount small appliances beneath wall
cabinets. These appliances (such as coffee makers and toasters)
can produce excessive heat, which can damage the finish of
cabinets. Do not expose doors or drawer fronts (especially
thermofoil) to heat created from self-cleaning ovens or ranges.
The HSK (Heat Shield Kit) should be used when thermofoil
cabinets are installed or mounted directly next to ovens or
ranges.
Allow Cabinets To Age Beautifully
Our cabinets showcase the careful selection of natural and
engineered materials to achieve the best possible look. While
every effort is made to match wood grain as closely as possible,
no two pieces of wood are exactly alike, even from the same
tree. These differences in natural color and grain mean that each
piece will respond differently to the finishing materials used.
For example, close-grained woods absorb less and will vary in
color from more open-grained pieces from the very same tree. It’s
these variations that contribute to the beauty and distinction of
quality wood products. However, exposure to sunlight, smoke
and chemicals may cause some materials to fade or vary from
their original color over time.
This is why cabinets, doors, drawer fronts and accessories added
at a later date may not exactly match cabinets installed now. For
the same reasons, door samples or displays may not represent
the exact color of cabinets received at the time of shipment.
Consumers should also read all cleaning agent instructions
carefully before application.
Due to changes that occur from natural and environmental
factors a cabinet is exposed to over its lifetime, we cannot be
responsible for the variations that occur in the finish of natural
and engineered materials as they age.
Wood Species & Materials
Simply Woodmark incorporates solid hardwoods and hardwood
veneers. These are natural materials with inherent variations.
As such, our quality standards establish tolerance ranges for
matching the hardwood pieces. Consumers should review actual
samples of hardwoods in our selling centers and cabinet displays
to help establish realistic expectations of variations involving
wood grain, color tones, presence of knots and so forth.
These variations are at the heart of the unique natural beauty
of finished hardwood. In addition, exposure of wood products
to sunlight, some chemical agents and smoke can cause wood
colors to change over time.
Hardwoods
Thermofoil
Hardwoods have a dense structure and come from broad-leaved
deciduous trees such as maple, oak, birch, cherry, hickory, poplar,
or ash species. We use a combination of these to achieve a great
looking and highly durable product. Features described below
are typical and not considered defects:
• Light blonde tones to dark reddish brown tones
• Small black and reddish brown minerals streaks or deposits
that darken with stain
• Wavy, curly bird’s-eye or burl graining as well as worm
tracking across the grain that will darken when stained
• Variations within a single door
Thermofoil is thick vinyl film bonded to warp-resistant
engineered wood which allow cabinet doors and drawer fronts
to exhibit the same styling and detail found in hardwood doors.
• The color is consistent throughout the film
• The core is medium density fiberboard (MDF) with a
melamine back
• The surface is durable, easy to clean and especially resistant to
chipping and cracking
Simply Woodmark Specification Guide
STANDARD CABINET SPECS
15
STANDARD CABINET SPECS
16 STANDARD CABINET SPECIFICATIONS: Wall Cabinet Construction
The drawing below illustrates and identifies the parts of a standard Simply Woodmark wall cabinet.
NOTE: Wall single door cabinets are hinged left and can be reversed in the field.
The drawing below illustrates and identifies the parts of a standard Simply Woodmark base cabinet.
NOTE: Base single door cabinets are hinged left and can be reversed in the field.
Simply Woodmark Specification Guide
STANDARD CABINET SPECS
STANDARD CABINET SPECIFICATIONS: Base Cabinet Construction 17
STANDARD CABINET SPECS
18 STANDARD CABINET SPECIFICATIONS: Hardware
Partial Overlay (POL)
Door Hinge
Full Overlay (FOL) Door Hinge
Side-Mounted Drawer Glides
All steel construction with nickel-plated
finish, 9⁄16” Partial Overlay hinge. Hinge allows
less than 3⁄16” frame-to-door gap. Up/down
adjustment of 1⁄4”. Exceeds industry standard
for durability. Standard feature on all Partial
Overlay (POL) door styles. Hinges permit doors
to open to approximately 105 degrees.
All steel construction with nickel-plated finish,
1 7⁄16” Full Overlay hinge. Hinge allows less
than 3⁄16” frame-to-door gap. Adjustability
allows superior up/down adjustment of 1⁄4”
and side-to-side adjustment of 1⁄4”. Exceeds
industry standard for durability. Standard
feature on all Full Overlay (FOL) door styles.
Hinges permit doors to open to approximately
105 degrees.
This glide system features twin self-aligning
side-mounted glides. They are constructed
of epoxy coated steel for quiet opening and
closing. Rollers are made of Delrin for smooth
operation.
Metal Shelf Rest
Base Locking Shelf Rest
Mullion Shelf Rest
⁄4” steel, nickel plated. Standard feature on all
wall cabinets and bookshelves.
Locks base shelves in place and prevents
shelves from sliding. Designed to allow easy
shelf removal. Molded from clear high-strength
polycarbonate. Standard feature on all base
and tall cabinets.
1
Allows for superior alignment of shelf with
mullion. Metal construction. Six position
adjustable. Standard feature on all Mullion
Frame Door cabinets.
These illustrations specify dimensions of vertical stiles and horizontal rails, inset toe kick, cabinet heights and standard
interior opening heights for Wall, Base, Vanity, Desk and Tall cabinets.
Wall Cabinets
Wall Cabinet
42” High
Wall Cabinet
36” High
Wall Cabinet
30” High
Wall Cabinet
27” High
Wall Cabinet
24” High
Wall Cabinet
21” High
Wall Cabinet
18” High
Wall Cabinet
15” High
Wall Cabinet
12” High
Base Cabinets
Inset Toe Kick
Base Cabinet
Full-Height Base Cabinet
Inset toe kick construction requires BTK8
matching toe kick – must be ordered separately.
Simply Woodmark Specification Guide
STANDARD CABINET SPECS
STANDARD CABINET SPECIFICATIONS: Cabinet Dimensions 19
STANDARD CABINET SPECS
20 STANDARD CABINET SPECIFICATIONS: Cabinet Dimensions
Drawer Base Cabinets
4 Drawer Base Cabinet
3 Drawer Base Cabinet
Vanity Cabinets
Vanity Base Cabinet
Base Height
Vanity Full-Height
Base Cabinet
Vanity Drawer Base
Base Height
27¼
Vanity Base Cabinet
Standard Height
Vanity Drawer Base
Standard Height
Desk Cabinets
Desk Base Cabinet
Desk Drawer Cabinet
File Drawer Base
Kneehole Drawer
Trimmable in height to 4 3⁄4”
*Dimension for KDC36/33 is 3 1⁄8”
Tall Cabinets
Vanity Linen Cabinet
Utility
Cabinet
Single Oven Cabinet*
Double Oven Cabinet*
*Actual height of oven opening shown. For actual width, maximum width and maximum height dimensions,
please refer to Cut Out Dimensions Chart in specific cabinet SKU box.
Universal Design Cabinets
Universal Design
Base
Universal Design
Drawer Base
Universal Design
Base Multi-Use
Universal Design Inset Toe Kick
Simply Woodmark Specification Guide
STANDARD CABINET SPECS
STANDARD CABINET SPECIFICATIONS: Cabinet Dimensions 21
STANDARD CABINET SPECS
22 STANDARD CABINET SPECIFICATIONS: Installation Guidelines
These illustrations specify dimensions of the height requirements for top alignment of Wall and Tall cabinets
(Linen, Utility, Oven) installation.
84” Top Alignment Cabinet Installation
Notes:
• 84” top alignment cabinet installation includes standard Wall cabinets (30 1⁄8” high) installed 53 7⁄8” above the
finished floor, allowing 17 7⁄8” clearance between the Wall cabinets and a standard countertop height of 36”.
• Tall cabinetry (Linen, Utility, Oven) is 84” high.
• When selecting cabinetry for installation above or near any appliance, refer to the appliance
manufacturer’s specifications for clearance and venting requirements.
90” Top Alignment Cabinet Installation
Notes:
• 90” top alignment cabinet installation includes taller Wall cabinets (36 1⁄8” high) installed 53 7⁄8” above the
finished floor, allowing 17 7⁄8” clearance between the Wall cabinets and a standard countertop height of 36”.
• Tall cabinetry (Utility, Oven) is 90” high.
• When selecting cabinetry for installation above or near any appliance, refer to the appliance
manufacturer’s specifications for clearance and venting requirements.
STANDARD CABINET SPECS
STANDARD CABINET SPECIFICATIONS: Installation Guidelines 23
96” Top Alignment Cabinet Installation
Notes:
• 96” top alignment cabinet installation includes full-height Wall cabinets (42 1⁄8” high) installed 53 7⁄8” above the
finished floor, allowing 17 7⁄8” clearance between the Wall cabinets and a standard countertop height of 36”.
• Tall cabinetry (Utility, Oven) is 96” high.
• When selecting cabinetry for installation above or near any appliance, refer to the appliance
manufacturer’s specifications for clearance and venting requirements.
Ceiling Height Requirements for Tall Cabinets
Notes
Minimum
Cabinet Ceiling Height
Height
Depth
A
84”
12”
84 9⁄16”
84”
18”
85 1⁄4”
84”
24”
86 1⁄2”
90”
12”
90 1⁄2”
90”
18”
91 5 ⁄16”
90”
24”
92 5 ⁄16”
96”
12”
96”
96”
18”
96”
96”
24”
96”
• 96” high Utility cabinets have 4” toe kick assembly
shipped inside cabinet.
Simply Woodmark Specification Guide
STANDARD CABINET SPECS
24 STANDARD CABINET SPECIFICATIONS: Overlay Dimensions
The drawings shown below illustrate the relationship between the cabinet face frame and Partial Overlay (POL) and Full
Overlay (FOL) doors. They show the amount of the cabinet face frame that is visible when Partial Overlay doors or Full
Overlay doors are selected.
Partial Overlay
Partial Overlay (POL) doors are sized to show
about an inch of the cabinet face frame, giving
the door some visual depth.
Full Overlay
Full Overlay (FOL) doors are sized to cover nearly all
of the cabinet face frame. Full Overlay door styles
require Decorative Hardware. To facilitate proper door
operation, include at least a 1” filler between the
hinged side of Full Overlay cabinets and deeper
adjacent objects including cabinets, walls, appliances
and countertops.
WALL CABINET FRONT
WALL CABINET FRONT
BASE CABINET FRONT
BASE CABINET FRONT
Construction Options
CONSTRUCTION
OPTIONS
STANDARD CABINET
SPECS
25
CONSTRUCTION OPTIONS
26 CONSTRUCTION OPTIONS: Legend & Examples
CONSTRUCTION OPTION
CODE
Cabinet Front Only Option
Increased Depth Cabinet Option
Inverted Frame Cabinet Option
Matching Interior Cabinet Option
CFO
ID
IF
MI
RTKL (Recessed Toe Kick Left)
RTKR (Recessed Toe Kick Right)
RTKB (Recessed Toe Kick Both)
Recessed Toe Kick Option
Reduced Depth Cabinet Option
Remove Dovetail Side-Glide Option
Void Door Wall Cabinet Option - NO Molding
RD
XDTSG
VDO-DFH (Drilled For Hinges)
VDO-SAM (Shaker Accent Molding)
VDO-SBAM (Single Bead Accent Molding)
VDO-TBAM (Triple Bead Accent Molding)
Void Door Wall Cabinet Options –
INCLUDING Molding
SPECIALTY DOOR OPTIONS
CODE
Mullion Frame Door
Open Frame Door
MFD
OFD
1. When the option appears, it indicates the construction option is
available for all SKU’s in the product box unless otherwise noted.
In this product box, all SKUs (B36, B39, B42 and B48) are
available with Cabinet Front Only, Inverted Frame Cabinet,
Reduced Depth Cabinet and Recessed Toe Kick options.
Base Cabinet
2 Doors, 2 Drawers
2. When a square ■ is included within the icon and next to the
SKU, it indicates the constructionoption is ONLY available
for that specific SKU.
In this product box, the W930, W1230, W1530, W1830,
W2130 and W2430 are available with the Void Door or
Matching Interior Options as the Specialty Door (SD) cabinets
feature Matching Interior standard.
Wall Cabinet
30” High, 1 Door
■
■
■
■
■
■
W930
W1230
W1530
W1830
W2130
W2430
3. When a construction icon is not listed, it indicates the construction
option is NOT available for any SKU in the product box.
In this product box, none of the SKUs are available with
Matching Interior or Void Door Options as these icons are not
listed.
CFO
IF
RD
RTK
B36
B39
B42
B48
CFO
W1230 SD
ID
W1530 SD ■ MI
RD
W1830 SD
W2130 SD ■ VDO
Base Cabinet
1 Door, 1 Drawer
B12
B15
B18
B21
B24
CFO
IF
RD
RTK
Inverted Frame Cabinet Option
IF
The Inverted Frame Cabinet Option is available for most Standard Base cabinets, Base Cabinets with Factory Installed Wastebasket(s) and
IF
Base Pot and Pan Organizer Cabinets (see individual cabinet specifications for
icon verifying this option availability).
Notes:
●
●
Drawer(s) below full cabinet floor.
Available with Reduced Depth Option (RD)
and Recessed Toe Kick (RTK).
Recessed Toe Kick Option
RTK
The Recessed Toe Kick Option is available on most Base, Desk and Vanity base cabinetry (refer to individual cabinet specifications
RTK
for
verifying this option availability). When the Recessed Toe Kick Option is selected, left, right or both must be specified.
Notes:
●
●
●
●
●
●
●
●
●
●
Recommended for cabinets at the end of a run, especially in island and peninsula designs.
Recessed side(s) are constructed of ½” thick unfinished engineered wood and are recessed 3½” to match front of cabinet.
Recessed Toe Kick box is not flush on non-recessed side.
Blind Corner Base cabinets (BLB_) are only available with the Recessed Toe Kick Both Option (RTKB).
BEA12FH, BEA24 FH Base End Angle, BPP9 Base Pantry Pull Out, BTDP9 Base Tray Divider Pull Out, TB9 and TB9 TDS cabinets
are not available with the Recessed Toe Kick Both Option (RTKB).
Not available for cabinets with the Reduced Depth Cabinet Option
of RD-8 and lower.
Not available for Peninsula Base cabinets with the Reduced Depth
Cabinet Option of RD-11 and lower.
For Peninsula Base cabinets, the drawer side indicates the front
of the cabinet.
Peninsula Base cabinets ordered with Recessed Toe Kick Option
must be secured to the floor through the cabinet bottom into
RTKL
RTKR
RTKB
bracing secured to the floor.
Base Toe Kick (BTK8) required for front and any exposed side(s).
Simply Woodmark Specification Guide
CONSTRUCTION OPTIONS
CONSTRUCTION OPTIONS: Inverted Frame, Recessed Toe Kick 27
CONSTRUCTION OPTIONS
28 CONSTRUCTION OPTIONS: Reduced Depth
Reduced Depth Cabinet Option
RD
The Reduced Depth Cabinet Option should be used when ordering less than standard depth cabinets. Reduced Depth cabinets are
available in 1” reductions; minimum cabinet depth is 4”. Vanity and Desk cabinets will reduce to standard Reduced Depth increments
(i.e. Vanity cabinets with RD-20 will measure 20” in depth).
Orders specifying Reduced Depth Option must show the total cabinet depth.
Example: Cabinet: B24
Option: RD-17 (RD – Reduce to 17” Deep)
Notes:
●
●
●
●
●
●
●
●
●
●
●
●
●
●
There is a potential tipping hazard for Reduced Depth cabinets until they are mounted to a wall.
Full-depth shelves are reduced in 1” increments to match the Reduced Depth Option selected on cabinet(s).
Half-depth shelves will not be reduced until cabinet is reduced to 11" or less.
Peninsula Base cabinets reduced to 11” or less will not have an inset toe kick.
Universal Design cabinets reduced to 9” or less will not have an inset toe kick.
All cabinets reduced to 5” or less will not have an inset toe kick.
All cabinets reduced to 8” or less are not available with the Recessed Toe Kick Option.
Universal Design cabinets reduced to 11” or less are not available with the Recessed Toe Kick Option (RTK).
Reduced Depth minimum for Wall Top Hinge cabinets is 8”.
Reduced Depth minimum for Straight Appliance Garage is 5”.
Reduced Depth minimum for Base End Angle (BEA12FH) cabinets is 18”.
Reduced Depth minimum for Kneehole Drawer cabinets is 12”.
Adding the Reduced Depth Cabinet Option does not remove adjustable shelf(s) (where applicable).
When ordering Reduced Depth accessories, specify the depth of the cabinet for which the accessory is
intended (e.g., SK3624-RD21 would be ordered for a UT3624 X 84 RD21).
Reduced Depth
Drawer Depth
Base & 24” Deep
Desk Cabinets
Drawer Depth
Vanity & 21” Deep
Desk Cabinets
RD-23
RD-22
RD-21
RD-20
RD-19
RD-18
RD-17
RD-16
RD-15
RD-14
RD-13
RD-12
RD-11 to RD-6
RD-5 or RD-4
18”
18”
18”
15”
15”
15”
12”
12”
12”
9”
9”
9”
No Drawer
No Drawer
—
—
—
15”
15”
15”
12”
12”
12”
9”
9”
9”
No Drawer
No Drawer
Deep Dovetail
Sliding Shelf Depth Sliding Shelf Depth
18”
18”
16”
16”
16”
15”
14”
13”
12”
11”
10”
9”
Not Available
Not Available
18”
18”
18”
15”
15”
15”
12”
12”
12”
9”
9”
9”
Not Available
Not Available
Increased Depth Cabinet Option
ID
The Increased Depth Cabinet Option is available for most Wall cabinets up to 36” wide (refer to individual cabinet specifications
ID
for
icon verifying this option availability) and all Bookshelves. Increased Depth cabinets are available in 1” increments.
Orders specifying Increased Depth Option must show the total cabinet depth.
Example: Cabinet: W1530
Option: ID-14 (ID – Increase to 14” Deep)
Notes:
Wall Cabinets:
● Maximum Increased Depth for Wall cabinets is 24”.
● Adjustable shelves are increased in 1” increments to match Increased Depth Option selected on cabinet(s).
● Increased Depth Wall cabinets up to and including 18” deep can be mounted using standard installation procedures.
● Wall cabinets increased to more than 18” deep must be stacked, floor mounted or installed over a refrigerator.
● All Increased Depth cabinets must be securely attached in one of the following combinations: to studs in back wall and
both sides OR to studs in back wall, one side and top (e.g., two adjacent cabinets or one adjacent cabinet and a wall).
Peninsula Wall (PW) and Blind Peninsula Wall (BLPW) Cabinets:
● Increased Depth PW and BLPW cabinets up to 15” deep may be mounted at ceiling height using standard installation procedures.
● PW and BLPW cabinets increased to more than 15” deep must be stacked or floor mounted.
● When mounting cabinet at ceiling height, the cabinet must be securely attached to the ceiling rafters and to at least one other
properly mounted cabinet or studs in wall.
● Additional 2” x 4” bracing may be required above ceiling if cabinets are not located directly below a rafter.
● Mount cabinet to the ceiling using mounting screws of sufficient length to go through ceiling treatment and into the rafter
at least 1”. Screws must be installed at both front and back of cabinet on 16” centers (maximum span), with at least four
screws per cabinet.
Remove Dovetail Side-Glide Option
XDTSG
The Dovetail Side-Glide Option is pre-selected in 20-20. The Dovetail Side-Glide Option
provides all of the features of the standard side-mounted drawer glide with the addition of
a 5/8” thick hardwood dovetail drawer that adds extra strength and stability.
Notes:
●
●
●
This option removes the pre-selected Dovetail Side-Glide Option.
Not available on Kneehole Drawer Cabinets (KDC) which feature dovetail
construction standard.
Available for cabinets with drawer(s).
Simply Woodmark Specification Guide
CONSTRUCTION OPTIONS
CONSTRUCTION OPTIONS: Increased Depth, Remove Dovetail Side-Glide 29
CONSTRUCTION OPTIONS
30 CONSTRUCTION OPTIONS: Cabinet Front Only, Void Door Cabinet
Cabinet Front Only Option
CFO
The Cabinet Front Only Option is available for most cabinets with a
CFO
frame (see individual cabinet specifications for
icon verifying
this option availability).
Notes:
●
●
This option consists of the cabinet frame, door(s),
drawer front(s), battens and hinges.
Toe kicks are not included.
Void Door Cabinet Option
VDO
The Void Door Cabinet Option is available for most Wall cabinets. All void door cabinets ship without doors, battens or hinges – center
stiles remain. All void door Wall Top Hinge cabinets ship without door, lid stays and hinges. Refer to the descriptions below to select
the correct option for your layout:
● VDO-DFH (Drilled For Hinges)
●
●
Use this option when doors will be ordered separately in a
complementing finish color.
Cabinet stiles are pre-drilled for door hinges.
● VDO-SBAM (Single Bead Accent Molding)
VDO-TBAM (Triple Bead Accent Molding)
VDO-SAM
VDO-SBAM
VDO-TBAM
VDO-SAM (Shaker Accent Molding)
Shaker
Accent
Single Bead Accent
Triple Bead Accent
● Use these options to create decorative open cabinets.
Molding
Molding
Molding
● Cabinet stiles are pre-drilled for door hinges –
Decorative Accent Moldings will conceal hinge holes.
● Molding is to be cut and field installed at the job site.
● When matching interior is desired, the Matching Interior Cabinet Option must be selected for all door styles.
Matching Interior Cabinet Option
The Matching Interior Cabinet Option is available for Wall cabinets (with
exceptions noted below), Utility cabinets, Vanity Linen cabinets and
Refrigerator Return Panels. This option matches the cabinet’s interior to
that of the cabinet’s exterior sides.
MI
Matching
Interior
Notes:
●
●
●
●
●
●
Cabinetry with the Matching Interior Cabinet Option features twosided engineered wood TuffTech finish side panels finished to match
cabinet exterior.
Recommended for cabinets with the Void Door Cabinet Option
(VDO).
Not available for Appliance Garages or any Wall cabinet with a standard
matching interior (including all Specialty Door cabinets).
All finished surfaces of the Wall, Utility and Vanity Linen cabinets will be color
matched including shelves, back, interior and exterior of returns, top and
bottom, Corner Wall back post and back side of Peninsula Wall face frames.
Interior accessories in Matching Interior cabinets (e.g., Spice Rack Kit, Sliding
Shelves, Pantry Swing Out Kit) will remain natural finish.
Cabinets with the Matching Interior Option features 3/4” shelving.
Matching
Interior
Simply Woodmark Specification Guide
CONSTRUCTION OPTIONS
CONSTRUCTION OPTIONS: Matching Interior 31
CONSTRUCTION OPTIONS
32 CONSTRUCTION OPTIONS: Specialty Door Options
Specialty Door Options
Specialty Door cabinets are available for most Wall, Utility and Vanity Linen cabinet sizes. All Specialty Door cabinets include Matching
Interior as standard (see page 31 for Matching Interior construction) and require one of the specialty door options below. Specialty
Door options for Utility and Vanity Linen cabinets applies to top door(s) only.
Open Frame Door (OFD) notes:
●
●
●
Features door frame only with no mullions or center panel.
Decorative Glass Inserts and appropriate glass clips are shipped separately from the cabinet for field installation – see pages 34-37
for available Glass Inserts.
See page 33 for door style profiles.
Mullion Frame Door (MFD) notes:
●
●
●
●
Features grid-style mullions.
Not available for Wall Top Hinge cabinets.
Decorative Glass Inserts and appropriate glass clips are shipped separately from the cabinet for field installation – see pages 34-37
for available Glass Inserts.
See page 33 for door style profiles.
Specialty Door Availability by Size
Cabinet Door Height
Door
Width
12” High
Wall
12” Wide
13” Wide
15” Wide
16” Wide
18” Wide
19” Wide
21” Wide
30” Wide
36” Wide
●
■
●
●
●
15” High
Wall
●
●
●
●
■
■
18” High
Wall
24” High
Wall
30” High
Wall
36” High
Wall
42” High
Wall
84” High Utility
or Vanity Linen
90” High
Utility
96” High
Utility
●
●
●
●
●
●
●
■
■
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Available with all Specialty Door Options
Wall Top Hinge cabinets only - not available with the MFD Option
CONSTRUCTION OPTIONS
CONSTRUCTION OPTIONS: Mullion Frame Door & Open Frame Door 33
Standard Profiles for MFD Square
12” High Wall Cabinet
15”, 18” or 24”
High Wall Cabinet
30” or 36” High Wall Cabinet
84” or 90” High Utility Cabinet
84” High Vanity Linen Cabinet
42” High Wall Cabinet
96” High Utility Cabinet
Standard Profile for OFD Square
All Height
Wall Cabinets
Simply Woodmark Specification Guide
34 CONSTRUCTION OPTIONS: Decorative Glass Inserts
CONSTRUCTION OPTIONS
Afton Glass
OFD
⁄ ” overall thickness
Clear glass design using zinc
caming and 2 pair of clear beveled
diamonds
Inserts for 12” wide doors
feature 1 pair of vertical clear
beveled diamonds
Inserts for 12”, 15” and 18”
high doors feature 1 pair
of horizontal clear beveled
diamonds
Includes appropriate Decorative
Glass Clips based on glass thickness
Not available for Wall Top Hinge
cabinets
● 5 16
●
●
●
●
●
Clear Glass
OFD
MFD
⁄ ” thick panel
Clear glass
Tempered safety glass
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 18
●
●
●
Antiqued Afton Glass
OFD
⁄ ” overall thickness
Clear glass design using bronzepatina caming and 2 pair of clear
beveled diamonds
Inserts for 12” wide doors
feature 1 pair of vertical clear
beveled diamonds
Inserts for 12”, 15” and 18”
high doors feature 1 pair
of horizontal clear beveled
diamonds
Includes appropriate Decorative
Glass Clips based on glass thickness
Not available for Wall Top Hinge
cabinets
● 5 16
●
●
●
●
●
Antiqued Fincastle Glass
OFD
●
●
●
●
●
Fincastle Glass
Derbyshire Seeded Glass
OFD
MFD
⁄ ” thick panel
Clear seeded glass
Laminated safety glass
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 5 16
●
●
●
⁄ ” overall thickness
Clear glass design using zinc caming
Not available for 12” high doors
Includes appropriate Decorative
Glass Clips based on glass thickness
Not available for Wall Top Hinge
cabinets
All sizes features 3 vertical caming
lines, spacing will vary according
to size
● 5 16
OFD
⁄ ” overall thickness
Clear glass design using zinc caming
Not available for 12” high doors
Includes appropriate Decorative
Glass Clips based on glass thickness
Not available for Wall Top Hinge
cabinets
All sizes features 3 vertical caming
lines, spacing will vary according to
size
● 5 16
●
●
●
●
●
Frosted Ash Glass
Frosted Glass
OFD
MFD
⁄ ” thick panel
Frosted glass with etched finish
Tempered safety glass
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 18
●
●
●
OFD
MFD
●
●
●
●
Havana Glass
OFD
MFD
⁄ ” thick panel
Bronze tinted glass with a twosided acid etched pattern - one
horizontal and one vertical
Tempered safety glass
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 18
●
●
●
⁄ ” thick panel
Gray tinted glass
Tint is manufactured in material not a film
Tempered safety glass
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 18
Frosted Umber Glass
OFD
MFD
●
●
●
●
Lucent Glass
Impression Glass
OFD
MFD
⁄ ” thick panel
Sculptural glass
Tempered safety glass
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 18
●
●
●
⁄ ” thick panel
Bronze tinted glass
Tint is manufactured in material not a film
Tempered safety glass
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 18
OFD
MFD
⁄ ” thick panel
Sculptural glass
Tempered safety glass
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 18
●
●
●
Simply Woodmark Specification Guide
CONSTRUCTION OPTIONS
CONSTRUCTION OPTIONS: Decorative Glass Inserts 35
36 CONSTRUCTION OPTIONS: Decorative Glass Inserts
Mirror Glass
CONSTRUCTION OPTIONS
Meredith Glass
OFD
⁄ ” overall thickness (1⁄8” beveled
edge thickness)
Clear glass design with 1 1⁄4” wide
beveled edges
Tempered safety glass
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 14
●
●
●
OFD
MFD
●
●
●
⁄ ” thick panel
Clear ribbed glass
Tempered safety glass
Includes appropriate Decorative
Glass Clips based on glass
thickness
Not available for Wall Top Hinge
cabinets
● 18
●
●
●
●
OFD
MFD
●
●
●
Woven Glass
Twilight Glass
OFD
MFD
⁄ ” thick panel
Laminated safety glass
Clear glass with randomized silver
fabric
Randomized patterns may result
in inherent variations between
adjacent pieces
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 14
●
●
●
●
⁄ ” thick panel
Clear glass with randomized
bronze/copper fabric
Randomized patterns may result
in inherent variations between
adjacent pieces
Laminated safety glass
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 14
●
Ribbed Glass
OFD
MFD
⁄ ” thick panel
Laminated safety glass
White vinyl in between glass layers
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 14
Radiance Glass
OFD
MFD
⁄ ” thick panel
Acid-etched fabric pattern
Low-iron glass
Tempered safety glass
Includes appropriate Decorative
Glass Clips based on glass
thickness
● 18
●
●
●
●
CONSTRUCTION OPTIONS: Decorative Glass Inserts 37
Prepped for Glass
CONSTRUCTION OPTIONS
Decorative Glass Clips
CLIP DGI BAG B SOL
CLIP DGI BAG C SOL
CLIP DGI 1/8
CLIP DGI 1/4
CLIP DGI 5/16
OFD
MFD
●
For customer installed inserts up to
⁄32” thick
Refer to page 33 for standard
profiles
Decorative Glass Clips not included
- order separately
9
●
●
●
●
●
Must specify Partial Overlay (POL) or Full Overlay (FOL) when ordering
For installation of Decorative Glass Insert
Order one bag (six clips) per door
Glass Insert
Afton
Antiqued Afton
Antiqued Fincastle
Clear
Derbyshire
Fincastle
Frosted
Frosted Ash
Frosted Umber
Havana
Impression
Lucent
Meredith
Mirror
Radiance
Ribbed
Twilight
Woven
Sunbrook, Clearfield
CLIP DGI BAG B
CLIP DGI BAG C
Sunbrook Thermofoil
CLIP DGI 1/8
CLIP DGI 1/4
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
CLIP DGI 5/16
●
●
Simply Woodmark Specification Guide
CONSTRUCTION OPTIONS
38 CONSTRUCTION OPTIONS: Notes
CONSTRUCTION OPTIONS
WALL CABINETS
39
Wall Cabinets
Dimensions
Width
Height
9” to 48”
12” to 42”
Depth
Standard 12” or 24”
(Increased Depth & Reduced Depth
optional on select cabinets)
SKU Coding
W
Cabinet Type
(e.g., W=Wall)
30
width in inches
30
height in inches
Construction Options & Modifications
CFO . . . . . . . . . . . . . . . . . . . . . . Cabinet Front Only
ID . . . . . . . . . . . . . . . . . . . . . . . . . . Increased Depth
MI . . . . . . . . . . . . . . . . . . . . . . . . Matching Interior
RD . . . . . . . . . . . . . . . . . . . . . . . . . . Reduced Depth
VDO . . . . . . . . . . . . . . . . . . . . . . . Void Door Option
Specialty Door (SD) Cabinet Options
MFD . . . . . . . . . . . . . . . . . . . . Mullion Frame Door
OFD . . . . . . . . . . . . . . . . . . . . . . . Open Frame Door
Simply Woodmark Specification Guide
40 WALL CABINETS: Standard
WALL CABINETS
Standard Wall Cabinets
■
■
■
■
■
Standard Wall cabinets range from
9” to 48” wide, 12” to 42” high and
are 12” deep.
Single door Standard Wall cabinets are
hinged left and can be reversed in the field.
For increased depth cabinets, please
refer to the installation notes listed in
the Increased Depth Construction Option
section, on page 29.
●
●
■
■
■
■
●
●
W942
W1242
W1542
W1842
W2142
W1242 SD
W1542 SD
W1842 SD
W2142 SD
Wall Cabinet
Wall Cabinet
42” High, 1 Door
42” High, 2 Doors with Batten
CFO
ID
RD
CFO
ID
■ MI
RD
■ VDO
●
●
●
Left door with batten
Three adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Wall Cabinet
Wall Cabinet
42” High, 2 Doors
36” High, 1 Door
CFO
ID
■ MI
RD
■ VDO
Three adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Construction Options (see page 25): ■ = Available for selected SKUs
W2442
W2442 SD
■ VDO
Three adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
W2742
W3042
W3342
W3642
W3042 SD
W3342 SD
W3642 SD
■
■ MI
■
■
■
■
■
●
●
W936
W1236
W1536
W1836
W2136
W1236 SD
W1536 SD
W1836 SD
W2136 SD
CFO
ID
■ MI
RD
■ VDO
Two adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
Wall Cabinet
Wall Cabinet
Wall Cabinet
36” High, 2 Doors with Batten
36” High, 2 Doors
30” High, 1 Door
CFO
ID
W2436
W2436 SD
■ MI
RD
■ VDO
●
●
●
■
●
●
●
Left door with batten
Two adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
■
■
■
●
●
W2736
W3036
W3336
W3636
W3036 SD
W3336 SD
W3636 SD
CFO
ID
■ MI
RD
■ VDO
Two adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
■
■
■
■
■
●
●
W930
W1230
W1530
W1830
W2130
W2430
W1230 SD
W1530 SD
W1830 SD
W2130 SD
CFO
ID
■ MI
RD
■ VDO
Two adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Wall Cabinet
Wall Cabinet
Wall Cabinet
30” High, 2 Doors with Batten
30” High, 2 Doors
30” High, 2 Doors
W2430 1B
W2430 1B SD
CFO
ID
■ MI
RD
■ VDO
Left door with batten
Two adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
■
■
■
●
●
W2730
W3030
W3330
W3630
W3030 SD
W3330 SD
W3630 SD
CFO
ID
■ MI
RD
■ VDO
Two adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
■
■
●
●
W3930
W4230
W4830
W3930 SD
W4230 SD
CFO
■ MI
RD
■ VDO
Two adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Simply Woodmark Specification Guide
WALL CABINETS
WALL CABINETS: Standard 41
WALL CABINETS
42 WALL CABINETS: Standard
■
●
●
●
●
■
●
●
●
Wall Cabinet
Wall Cabinet
Wall Cabinet
30” High, 3 Doors
27” High, 2 Doors
24” High, 1 Door
CFO
W4530
W4530 SD
■ MI
CFO
ID
MI
RD
VDO
W3027
RD
■ VDO
Two adjustable shelves
Hinged as shown
Center door hinged left and can be reversed
in the field
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
●
■
■
■
■
One adjustable shelf
●
●
W1224
W1524
W1824
W2124
W1224 SD
W1524 SD
W1824 SD
W2124 SD
CFO
ID
■ MI
RD
■ VDO
One adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Wall Cabinet
Wall Cabinet
Wall Cabinet
24” High, 2 Doors with Batten
24” High, 2 Doors
24” High, 2 Doors
W2424 1B
W2424 1B SD
CFO
ID
■ MI
RD
■ VDO
Left door with batten
One adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■ W2724
■ W3024
■ W3324
■ W3624
W3024 SD
W3324 SD
W3624 SD
●
●
CFO
■ MI
RD
■ VDO
One adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Construction Options (see page 25): ■ = Available for selected SKUs
■ W3924
■ W4224
W3924 SD
W4224 SD
●
●
CFO
■ MI
RD
■ VDO
One adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
●
●
●
●
W4524
W4524 SD
●
●
Wall Cabinet
Wall Cabinet
21” High, 2 Doors
18” High, 1 Door
CFO
■ MI
RD
■ VDO
One adjustable shelf
Hinged as shown
Center door hinged left and can be reversed
in the field
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■ W2418
■ W2718
■ W3018
■ W3318
■ W3618
W2418 SD
W2718 SD
W3018 SD
W3318 SD
W3618 SD
●
Wall Cabinet
24” High, 3 Doors
CFO
ID
MI
RD
VDO
W3021
W3321
W3621
●
●
■
■
■
■
No shelf
Not drilled for adjustable shelf
●
●
●
W1218
W1518
W1818
W2118
W1218 SD
W1518 SD
W1818 SD
W2118 SD
CFO
ID
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Wall Cabinet
Wall Cabinet
Wall Cabinet
18” High, 2 Doors
18” High, 2 Doors
18” High, 2 Doors
CFO
ID
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■ W4218
W4218 SD
●
●
●
CFO
ID
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
●
●
●
W3918
W3918 SD
CFO
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Simply Woodmark Specification Guide
WALL CABINETS
WALL CABINETS: Standard 43
WALL CABINETS
44 WALL CABINETS: Standard
■
■
■
●
●
●
■
■
■
●
●
●
W3015
W3315
W3615
W3015 SD
W3315 SD
W3615 SD
Wall Cabinet
Wall Cabinet
15” High, 2 Doors
15” High, 2 Doors
CFO
ID
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
W3012
W3312
W3612
W3012 SD
W3612 SD
■
■ MI
●
●
●
W3915
W3915 SD
CFO
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Wall Cabinet
Wall Cabinet
12” High, 2 Doors
12” High, 2 Doors
CFO
ID
■
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
●
●
●
W3912
W3912 SD
CFO
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Construction Options (see page 25): ■ = Available for selected SKUs
Wall Cabinets with
Spice Rack
Wall Cabinet
Wall Cabinet
42” High, 1 Door with Spice Rack
36” High, 1 Door with Spice Rack
ID
MI
W1542 SR
W1842 SR
W2142 SR
Wall cabinets with Spice Rack range from
15” to 21” wide, 30” to 42” high and are
12” deep.
Wall cabinets with Spice Rack are hinged
left and can be reversed in the field.
For increased depth cabinets, please refer
to the installation notes listed in the
Increased Depth Option Section.
●
●
●
●
Three adjustable shelves
Spice Rack Kit packaged separately for
field installation
Position adjustable shelves prior to installation
Kit in natural finish solid wood features chrome
rails and three fixed shelves
W1536 SR
W1836 SR
W2136 SR
●
●
●
●
ID
MI
Two adjustable shelves
Spice Rack Kit packaged separately for
field installation
Position adjustable shelves prior to installation
Kit in natural finish solid wood features chrome
rails and three fixed shelves
Wall Cabinet
30” High, 1 Door with Spice Rack
W1530 SR
W1830 SR
W2130 SR
●
●
●
●
ID
MI
Two adjustable shelves
Spice Rack Kit packaged separately for
field installation
Position adjustable shelves prior to installation
Kit in natural finish solid wood features chrome
rails and three fixed shelves
Simply Woodmark Specification Guide
WALL CABINETS
WALL CABINETS: With Spice Rack 45
46 WALL CABINETS: Refrigerator Wall
WALL CABINETS
Refrigerator Wall Cabinets
Refrigerator Wall
Refrigerator Wall
27” High x 24” Deep
24” High x 24” Deep
W3027 X 24 DP
Refrigerator Wall cabinets range from
12” to 27” high and are 24” deep.
●
●
CFO
MI
RD
VDO
One adjustable half-depth shelf
Each side of cabinet must be attached to a
cabinet, wall or Refrigerator Return Panel
■
■
■
●
●
●
To ensure proper door function on a
Refrigerator Wall cabinet, allow enough
clearance for the top hinge(s) on the
refrigerator door. Review refrigerator
manufacturer’s specifications for
dimensions and clearance requirements.
●
●
RD
■ VDO
One adjustable half-depth shelf
Each side of cabinet must be attached to a
cabinet, wall or Refrigerator Return Panel
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Refrigerator Wall
21” High x 24” Deep
18” High x 24” Deep
CFO
MI
RD
VDO
No shelf
Not drilled for adjustable shelf
Each side of cabinet must be attached to a
cabinet, wall or Refrigerator Return Panel
■
■
■
●
●
●
●
Construction Options (see page 25): ■ = Available for selected SKUs
CFO
■ MI
Refrigerator Wall
W3021 X 24 DP
W3321 X 24 DP
W3621 X 24 DP
●
W3024 X 24 DP
W3324 X 24 DP
W3624 X 24 DP
W3024 X 24 DP SD
W3324 X 24 DP SD
W3624 X 24 DP SD
W3018 X 24 DP
W3318 X 24 DP
W3618 X 24 DP
W3018 X 24 DP SD
W3318 X 24 DP SD
W3618 X 24 DP SD
CFO
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Each side of cabinet must be attached to a
cabinet, wall or Refrigerator Return Panel
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
■
■
●
●
●
●
Refrigerator Wall
Refrigerator Wall
Refrigerator Wall
15” High x 24” Deep
15” High x 24” Deep
12” High x 24” Deep
W3015 X 24 DP
W3315 X 24 DP
W3615 X 24 DP
W3015 X 24 DP SD
W3315 X 24 DP SD
W3615 X 24 DP SD
CFO
■ MI
■
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Each side of cabinet must be attached to a
cabinet, wall or Refrigerator Return Panel
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
●
●
●
●
W3915 X 24 DP
W3915 X 24 DP SD
CFO
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Each side of cabinet must be attached to a
cabinet, wall or Refrigerator Return Panel
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
■
■
●
●
●
●
W3012 X 24 DP
W3312 X 24 DP
W3612 X 24 DP
W3012 X 24 DP SD
W3612 X 24 DP SD
CFO
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Each side of cabinet must be attached to a
cabinet, wall or Refrigerator Return Panel
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Refrigerator Wall
12” High x 24” Deep
■
●
●
●
●
W3912 X 24 DP
W3912 X 24 DP SD
CFO
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Each side of cabinet must be attached to a
cabinet, wall or Refrigerator Return Panel
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Simply Woodmark Specification Guide
WALL CABINETS
WALL CABINETS: Refrigerator Wall 47
48 WALL CABINETS: Wall Top Hinge
WALL CABINETS
Wall Top Hinge Cabinets
Wall Top Hinge
Wall Top Hinge
15” High
18” High
A
30”
36”
WTH3015
WTH3615
■
■
●
Wall Top Hinge cabinets are 30” or 36”
wide, 15” or 18” high and 12” or 24”
deep.
Wall Top Hinge cabinets uses standard
wall door in horizontal orientation. Rail
and stile configuration and insert panel
grain direction will differ from standard
wall cabinets.
●
●
●
●
For Increased Depth cabinets, please
refer to the installation notes listed
in the Increased Depth Construction
Option Section.
●
●
●
●
●
●
■ MI
RD
■ VDO
No shelf
Features one pair of factory installed field adjustable
lid stays that support door securely at any angle up
to 105°
Cabinet can be flipped to open downwards and
lid stay can be adjusted to support door
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Wall Top Hinge Specialty Door cabinets not
available with the MFD option
●
●
●
●
●
ID
WTH3018
WTH3618
WTH3018 SD
WTH3618 SD
■ MI
RD
■ VDO
No shelf
Features one pair of factory installed field adjustable
lid stays that support door securely at any angle up
to 105°
Cabinet can be flipped to open downwards and
lid stay can be adjusted to support door
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Wall Top Hinge Specialty Door cabinets not
available with the MFD option
Wall Top Hinge
Wall Top Hinge
18” High x 24” Deep
WTH3015 X 24DP
WTH3615 X 24DP
WTH3015 X 24DP SD
WTH3615 X 24DP SD
A
30”
36”
WTH3018 X 24DP
WTH3618 X 24DP
■ MI
RD
■ VDO
No shelf
Features one pair of factory installed field adjustable
lid stays that support door securely at any angle up
to 105°
Cabinet can be flipped to open downwards and
lid stay can be adjusted to support door
Each side of cabinet must be attached to a
cabinet, wall or Refrigerator Return Panel
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Wall Top Hinge Specialty Door cabinets not
available with the MFD option
Construction Options (see page 25): ■ = Available for selected SKUs
■
■
15” High x 24” Deep
WTH3015 X 24DP
WTH3615 X 24DP
■
■
ID
WTH3015
WTH3615
WTH3015 SD
WTH3615 SD
A
30”
36”
WTH3018
WTH3618
■
■
●
●
●
●
●
●
WTH3018 X 24DP
WTH3618 X 24DP
WTH3018 X 24DP SD
WTH3618 X 24DP SD
A
30”
36”
■ MI
RD
■ VDO
No shelf
Features one pair of factory installed field adjustable
lid stays that support door securely at any angle up
to 105°
Cabinet can be flipped to open downwards and
lid stay can be adjusted to support door
Each side of cabinet must be attached to a
cabinet, wall or Refrigerator Return Panel
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Wall Top Hinge Specialty Door cabinets not
available with the MFD option
Microwave Wall Cabinets
Wall Microwave
Wall Microwave
42” High, 2 Doors with Batten
36” High, 2 Doors
WMSC271842
RD
VDO
WMSC301236
RD
VDO
Microwave Wall Cabinets range from 24”
to 30” wide, 36” or 42” high and 12”, 18”
or 21” deep.
Microwave Wall Cabinets must be
installed between two adjacent cabinets
or one cabinet and a wall.
●
●
●
●
●
●
●
●
Left door with batten
Cabinet interior, microwave shelf opening and one
adjustable shelf finished to match cabinet exterior
3
⁄4” plywood microwave shelf included - not field
trimmable
Designed to accommodate countertop style
microwave
Unit must be installed between two adjacent
cabinets or one cabinet and wall
Lower frame opening (including shelf):
23 3⁄4” W x 15 1⁄4” H x 23 3⁄4” D
Features (2) DR1324 doors
Refer to appliance manufacturer’s
specifications for adequate clearances
●
●
●
●
●
●
●
Cabinet interior and microwave shelf opening
finished to match cabinet exterior
3
⁄4” plywood microwave shelf included - not field
trimmable
Designed to accommodate countertop
style microwave
Unit must be installed between two adjacent
cabinets or one cabinet and wall
Lower frame opening (including shelf):
26 3⁄4” W x 18 5⁄8” H x 17 3⁄4” D
Features (2) DR1515 doors
Refer to appliance manufacturer's
specifications for adequate clearances
When a Microwave Wall cabinet is
used in a design, remember to place
the cabinet between two adjacent
cabinets OR one cabinet and the wall.
Review microwave manufacturer’s
specifications for dimensions and
adequate clearances for venting
requirements.
Simply Woodmark Specification Guide
WALL CABINETS
WALL CABINETS: Microwave Wall 49
50 WALL CABINETS: Microwave Wall
Wall Compact Microwave
Microwave Wall
WALL CABINETS
36” High, 2 Doors with Batten
Microwave Wall
42” High, 30” Wide
36” High, 30” Wide
A
A
B
B
WCMSC241236
WCMSC271236
WCMSC241236
WCMSC271236
●
●
●
●
●
●
●
●
●
Actual
Max
Actual
Max
Opening Opening Opening Opening
A
24”
27”
WMC301842
WMC302142
RD
VDO
Left door with batten
Cabinet interior and microwave shelf opening
finished to match cabinet exterior
3
⁄4” plywood microwave shelf included - not field
trimmable
Designed to accommodate countertop
style microwave
Unit must be installed between two adjacent
cabinets or one cabinet and wall
Lower frame opening (including shelf):
WCMSC241236: 20 3⁄4” W x 15 5⁄8” H x 17 3⁄4” D
WCMSC271236: 23 3⁄4” W x 15 5⁄8” H x 17 3⁄4” D
24” features (2) DR1218 doors
27” features (2) DR1318 doors
Refer to appliance manufacturer's
specifications for adequate clearances
WMC301842
WMC302142
●
●
●
●
●
●
12¼”
12¼”
20”
20”
23¾”
23¾”
28 ”
28”
ID
RD
MI
Unit must be installed between two adjacent
cabinets or one cabinet and wall
Designed to accommodate microwaves
with trim kit
A cutout exists in the door area where the 3 1⁄8”
stiles are routed to 1 5⁄8”
Refer to appliance manufacturers
specifications for adequate clearances
Not drilled for adjustable shelf
WMC301842 and WMC302142 feature (2)
DR1521 doors
Construction Options (see page 25): ■ = Available for selected SKUs
A
A
B
B
C
18” WMC301836
21" WMC302136
WMC301836
WMC302136
●
●
●
●
●
●
Actual
Max
Actual
Max
Opening Opening Opening Opening
11¾” 19½” 23¾”
11¾” 19½” 23¾”
28 ”
28”
ID
RD
MI
Unit must be installed between two adjacent
cabinets or one cabinet and wall
Designed to accommodate microwaves
with trim kit
A cutout exists in the door area where the 3 1⁄8”
stiles are routed to 1 5⁄8”
Refer to appliance manufacturers
specifications for adequate clearances
Not drilled for adjustable shelf
WMC301836 and WMC302136 feature (2)
DR1515 doors
C
18”
21"
Peninsula Wall Cabinets
■
Peninsula Wall cabinets range in size from
12” to 42” wide, 18” to 42” high and are
12” deep with doors on both sides of the
cabinet.
For increased depth cabinets, please
refer to the installation notes listed in
the Increased Depth Construction Option
section.
When designing with Peninsula Wall
Cabinets, remember to include material
such as Finished Shelving to cover the
bottom of the cabinets.
●
●
●
■
●
●
●
Peninsula Wall
Peninsula Wall
42” High, 4 Doors with Batten
42” High, 4 Doors
PW2442
PW2442 SD
ID
■ MI
RD
■ VDO
Left doors with battens
Three adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
■
●
●
PW3042
PW3642
PW3042 SD
PW3642 SD
ID
■ MI
RD
■ VDO
Three adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Peninsula Wall
Peninsula Wall
36” High, 4 Doors with Batten
36” High, 4 Doors
PW2436
PW2436 SD
ID
■ MI
RD
■ VDO
Left doors with battens
Two adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
■
●
●
PW3036
PW3636
PW3036 SD
PW3636 SD
ID
■ MI
RD
■ VDO
Two adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Simply Woodmark Specification Guide
WALL CABINETS
WALL CABINETS: Peninsula Wall 51
WALL CABINETS
52 WALL CABINETS: Peninsula Wall
■
■
■
■
●
●
●
Peninsula Wall
Peninsula Wall
Peninsula Wall
30” High, 2 Doors
30” High, 4 Doors
30” High, 4 Doors
PW1230
PW1530
PW1830
PW2430
PW1230 SD
PW1530 SD
PW1830 SD
RD
■ VDO
Two adjustable shelves
Hinged as shown
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■ PW3030
■ PW3630
PW3030 SD
PW3630 SD
●
●
ID
■ MI
RD
■ VDO
Two adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■ PW4230
PW4230 SD
●
●
■ MI
RD
■ VDO
Two adjustable shelves
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Peninsula Wall
Peninsula Wall
Peninsula Wall
27” High, 4 Doors
24” High, 2 Doors
24” High, 4 Doors with Batten
PW3027
●
ID
■ MI
One adjustable shelf
ID
MI
RD
VDO
■ PW1224
■ PW1824
PW1224 SD
PW1824 SD
●
●
●
ID
■ MI
RD
■ VDO
One adjustable shelf
Hinged as shown
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Construction Options (see page 25): ■ = Available for selected SKUs
■ PW2424 1B
PW2424 1B SD
●
●
●
ID
■ MI
RD
■ VDO
One adjustable shelf
Left doors with battens
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Peninsula Wall
Peninsula Wall
Peninsula Wall
24” High, 4 Doors
24” High, 4 Doors
21” High, 4 Doors
■ PW3024
■ PW3624
PW3024 SD
PW3624 SD
●
●
●
●
●
RD
■ VDO
One adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■ PW4224
PW4224 SD
●
●
■ MI
RD
■ VDO
One adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
ID
MI
RD
VDO
PW3021
PW3621
●
●
No shelf
Not drilled for adjustable shelf
Peninsula Wall
Peninsula Wall
Peninsula Wall
18” High, 2 Doors
18” High, 4 Doors
18” High, 4 Doors
■ PW1818
PW1818 SD
●
ID
■ MI
ID
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Hinged as shown
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■ PW2418
■ PW3018
■ PW3618
PW2418 SD
PW3018 SD
PW3618 SD
●
●
●
ID
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■ PW4218
PW4218 SD
●
●
●
■ MI
RD
■ VDO
No shelf
Not drilled for adjustable shelf
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Simply Woodmark Specification Guide
WALL CABINETS
WALL CABINETS: Peninsula Wall 53
54 WALL CABINETS: Blind Wall
WALL CABINETS
Blind Wall Cabinets
Blind Wall
Blind Wall
42” High, 1 Door
42” High, 2 Doors with Batten
■ BLW24/2742
■ BLW30/3342
■ BLW33/3642
BLW24/2742 SD
BLW30/3342 SD
BLW33/3642 SD
Blind Wall cabinets range in width from
24” to 48” and in height from 24” to 42”.
Single door Blind Wall cabinets are hinged
left and can be reversed in the field.
For increased depth cabinets, please
refer to the installation notes listed in
the Increased Depth Construction Option
section.
When a Blind Wall cabinet is used
in a design, remember to include
the appropriate filler. For a finished,
decorative look add an Overlay Filler
(Full Overlay door styles) to Universal
Fillers or Decorative Blocks to a Fluted
Beaded Filler.
●
●
●
●
●
●
●
●
●
RD
CFO
ID
■ MI
RD
■ VDO
●
●
●
●
●
●
Left door with batten
Three adjustable shelves
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Wall cabinet Installation Chart
for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Blind Wall
Blind Wall
42” High, 2 Doors
36” High, 1 Door
CFO
■ MI
RD
■ VDO
Three adjustable shelves
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Wall cabinet Installation Chart
for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Construction Options (see page 25): ■ = Available for selected SKUs
■ BLW36/3942
BLW36/3942 SD
■ VDO
Three adjustable shelves
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Wall cabinet Installation Chart
for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■ BLW39/4242
■ BLW42/4542
BLW42/4542 SD
●
CFO
ID
■ MI
■ BLW24/2736
■ BLW30/3336
■ BLW33/3636
BLW24/2736 SD
BLW30/3336 SD
BLW33/3636 SD
●
●
●
●
●
CFO
ID
■ MI
RD
■ VDO
Two adjustable shelves
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Wall cabinet Installation Chart
for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Blind Wall
Blind Wall
Blind Wall
36” High, 2 Doors with Batten
36” High, 2 Doors
30” High, 1 Door
■ BLW36/3936
BLW36/3936 SD
●
●
●
●
●
●
■
■
■
■
CFO
ID
■ MI
RD
■ VDO
Left door with batten
Two adjustable shelves
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Wall cabinet Installation Chart
for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
CFO
■ BLW39/4236
■ BLW42/4536
BLW42/4536 SD
●
●
●
●
●
■ MI
RD
■ VDO
Two adjustable shelves
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Wall cabinet Installation Chart
for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
■
■
■
■
●
●
●
●
●
●
●
●
●
CFO
ID
■ MI
RD
■ VDO
Two adjustable shelves
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Wall cabinet Installation Chart
for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Blind Wall
Blind Wall
Blind Wall
30” High, 2 Doors
24” High, 1 Door
24” High, 2 Doors with Batten
BLW39/4230
BLW42/4530
BLW45/4830
BLW48/5130
BLW42/4530 SD
BLW45/4830 SD
BLW48/5130 SD
CFO
■ MI
RD
■ VDO
■
■
■
■
BLW24/2724
BLW27/3024
BLW30/3324
BLW33/3624
BLW24/2724 SD
BLW27/3024 SD
BLW30/3324 SD
BLW33/3624 SD
CFO
ID
■ MI
RD
■ BLW36/3924 1B
BLW36/3924 1B SD
■ VDO
Two adjustable shelves
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Wall cabinet Installation Chart
for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
●
●
●
●
●
One adjustable shelf
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Wall cabinet Installation Chart
for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
CFO
ID
■ MI
RD
■ VDO
●
●
●
BLW24/2730
BLW27/3030
BLW30/3330
BLW33/3630
BLW36/3930
BLW24/2730 SD
BLW27/3030 SD
BLW30/3330 SD
BLW33/3630 SD
●
●
●
●
Left door with batten
One adjustable shelf
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Wall cabinet Installation Chart
for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Simply Woodmark Specification Guide
WALL CABINETS
WALL CABINETS: Blind Wall 55
56 WALL CABINETS: Blind Wall
WALL CABINETS
Blind Wall Cabinet Installation Chart
Full Overlay (FOL) Door Styles
Full Overlay door styles require decorative hardware, which has been calculated into dimensions.
*Dimension requirements do not include optional Overlay Fillers – add 7⁄8” if Overlay Fillers will be used.
Wall Space A
Actual
Cabinet
Width
Door
Opening
BLW24/27
BLW27/30
24”
27”
8 3⁄4”
11 3⁄4”
BLW30/33
BLW33/36
BLW36/3930
BLW36/39 (1B)
BLW39/42
BLW42/45
BLW45/48
BLW48/51
30”
33”
36”
36”
39”
42”
45”
48”
14 3⁄4”
17 3⁄4”
20 3⁄4”
20 3⁄4”
10 3⁄4”
11 3⁄4”
13 1⁄4”
14 3⁄4”
Cabinet
Exposed Frame B
Door(s)
Minimum
Space*
Maximum
Pull
Maximum
Space
Minimum
Space*
Maximum
Space
DR12__
DR15__
DR18__
DR21__
DR2430
DR12__ (2)
DR13__ (2)
DR15__ (2)
DR16__ (2)
DR18__ (2)
26 1⁄4”
29 1⁄4”
32 1⁄4”
35 1⁄4”
38 1⁄4”
38 1⁄4”
41 1⁄4”
44 1⁄4”
47 1⁄4”
50 1⁄4”
1 3⁄4”
1 3⁄4”
1 3⁄4”
1 3⁄4”
1 3⁄4”
1 3⁄4”
1 3⁄4”
1 3⁄4”
1 3⁄4”
1 3⁄4”
28”
31”
34”
37”
40”
40”
43”
46”
49”
52”
14 1⁄4”
17 1⁄4”
20 1⁄4”
23 1⁄4”
26 1⁄4”
26 1⁄4”
29 1⁄4”
32 1⁄4”
35 1⁄4”
38 1⁄4”
16”
19”
22”
25”
28”
28”
31”
34”
37”
40”
Partial Overlay (POL) Door Styles
Wall Space A requirements include optional decorative hardware clearance.
*1 1⁄4” may be deducted if decorative hardware is not used.
Wall Space A
Actual
Cabinet
Width
Door
Opening
BLW24/27
BLW27/30
24”
27”
8 3⁄4”
11 3⁄4”
BLW30/33
BLW33/36
BLW36/3930
BLW36/39 (1B)
BLW39/42
BLW42/45
BLW45/48
BLW48/51
30”
33”
36”
36”
39”
42”
45”
48”
14 3⁄4”
17 3⁄4”
20 3⁄4”
20 3⁄4”
10 3⁄4”
11 3⁄4”
13 1⁄4”
14 3⁄4”
Cabinet
Construction Options (see page 25): ■ = Available for selected SKUs
Exposed Frame B
Door(s)
Minimum
Space*
Maximum
Pull*
Maximum
Space*
Minimum
Space
Maximum
Space
DR12__
DR15__
DR18__
DR21__
DR2430
DR12__ (2)
DR13__ (2)
DR15__ (2)
DR16__ (2)
DR18__ (2)
25 3⁄8”
28 3⁄8”
31 3⁄8”
34 3⁄8”
37 3⁄8”
37 3⁄8”
40 3⁄8”
43 3⁄8”
46 3⁄8”
49 3⁄8”
2 5⁄8”
2 5⁄8”
2 5⁄8”
2 5⁄8”
2 5⁄8”
2 5⁄8”
2 5⁄8”
2 5⁄8”
2 5⁄8”
2 5⁄8”
28”
31”
34”
37”
40”
40”
43”
46”
49”
52”
13 3⁄8”
16 3⁄8”
19 3⁄8”
22 3⁄8”
25 3⁄8”
25 3⁄8”
28 3⁄8”
31 3⁄8”
34 3⁄8”
37 3⁄8”
16”
19”
22”
25”
28”
28”
31”
34”
37”
40”
WALL CABINETS: Blind Wall 57
Cabinet
BLW24/27
BLW27/30
BLW30/33
BLW33/36
BLW36/3930
BLW36/39 (1B)
Cabinet
Door
Width Opening
A
B
C
6 1⁄4”
24”
8 3⁄4”
27”
11 3⁄4”
6 1⁄4”
30”
14 3⁄4”
6 1⁄4”
33”
17 3⁄4”
6 1⁄4”
36”
20 3⁄4”
6 1⁄4”
36”
20 3⁄4”
6 1⁄4”
D
7 3⁄8”
7 3⁄8”
7 3⁄8”
7 3⁄8”
7 3⁄8”
7 3⁄8”
Cabinet
BLW39/42
BLW42/45
BLW45/48
BLW48/51
Cabinet Door
Width Opening
A
B
39”
10 3⁄4”
42”
11 3⁄4”
45”
13 1⁄4”
48”
14 3⁄4”
C
6 1⁄4”
6 1⁄4”
6 1⁄4”
6 1⁄4”
D
7 3⁄8”
7 3⁄8”
7 3⁄8”
7 3⁄8”
Simply Woodmark Specification Guide
WALL CABINETS
Blind Wall Cabinet Dimensions
58 WALL CABINETS: Blind Peninsula Wall
WALL CABINETS
Blind Peninsula Wall Cabinets
Blind Peninsula Wall
Blind Peninsula Wall
42” High, 3 Doors
36” High, 3 Doors
■ BLPW2442
BLPW2442 SD
●
For increased depth cabinets, please
refer to the installation notes listed in
the Increased Depth Construction Option
section.
●
●
●
●
●
●
●
●
●
●
RD
■ VDO
Left door with batten on peninsula side
Three adjustable shelves
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Peninsula Wall cabinet Installation
Chart for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
●
●
●
●
●
●
ID
■ MI
RD
■ VDO
Left door with batten on peninsula side
Two adjustable shelves
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Peninsula Wall cabinet Installation
Chart for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Blind Peninsula Wall
30” High, 3 Doors
24” High, 3 Doors
ID
■ MI
RD
■ VDO
Left door with batten on peninsula side
Two adjustable shelves
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Peninsula Wall cabinet Installation
Chart for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Construction Options (see page 25): ■ = Available for selected SKUs
■ BLPW2436
BLPW2436 SD
Blind Peninsula Wall
■ BLPW2430 1B
BLPW2430 1B SD
●
ID
■ MI
■ BLPW2424 1B
BLPW2424 1B SD
●
●
●
●
●
●
ID
■ MI
RD
■ VDO
Left door with batten on peninsula side
One adjustable shelf
Includes 1⁄8” panel to cover blind opening
(field trim and install)
Refer to Blind Peninsula Wall cabinet Installation
Chart for specifications
Must order Universal Filler separately
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
WALL CABINETS: Blind Peninsula Wall 59
WALL CABINETS
Blind Peninsula Wall Cabinet Installation Chart
Full Overlay Door Styles
Full Overlay door styles require decorative hardware, which has been calculated into dimensions.
*Must use these dimensions if optional Overlay Fillers will be used.
Actual
Cabinet
Width
Door
Opening
C
BLPW2424 1B
BLPW2430 1B
24”
24”
8 3⁄4”
8 3⁄4”
BLPW2436
BLPW2442
24”
24”
8 3⁄4”
8 3⁄4”
Cabinet
Door
C
Door
Opening
D
Doors (2)
D
DR1224
DR1230
DR1236
DR1242
20 3⁄4”
20 3⁄4”
20 3⁄4”
20 3⁄4”
DR1224
DR1230
DR1236
DR1242
Wall Space A
Exposed Frame B
Filler (at wall)
Minimum Maximum Maximum
Space
Pull
Space*
Minimum Maximum
Space
Space*
Minimum Maximum*
26 1⁄4”
26 1⁄4”
26 1⁄4”
26 1⁄4”
⁄4”
3
⁄4”
3
⁄4”
3
⁄4”
3
27”
27”
27”
27”
14 1⁄4”
14 1⁄4”
14 1⁄4”
14 1⁄4”
15”
15”
15”
15”
2 1⁄4”
2 1⁄4”
2 1⁄4”
2 1⁄4”
3”
3”
3”
3”
Partial Overlay Door Styles
Wall Space A requirements include optional decorative hardware clearance.
*1 1⁄4” may be deducted if decorative hardware is not used.
Actual
Cabinet
Width
Door
Opening
C
BLPW2424 1B
BLPW2430 1B
24”
24”
8 3⁄4”
8 3⁄4”
BLPW2436
BLPW2442
24”
24”
8 3⁄4”
8 3⁄4”
Cabinet
Door
C
Door
Opening
D
Doors (2)
D
DR1224
DR1230
DR1236
DR1242
20 3⁄4”
20 3⁄4”
20 3⁄4”
20 3⁄4”
DR1224
DR1230
DR1236
DR1242
Wall Space A
Exposed Frame B
Filler (at wall)
Minimum Maximum Maximum
Space*
Pull*
Space*
Minimum Maximum
Space
Space
Minimum Maximum
25 3⁄8”
25 3⁄8”
25 3⁄8”
25 3⁄8”
1 5⁄8”
1 5⁄8”
1 5⁄8”
1 5⁄8”
27”
27”
27”
27”
13 3⁄8”
13 3⁄8”
13 3⁄8”
13 3⁄8”
15”
15”
15”
15”
1 3⁄8”
1 3⁄8”
1 3⁄8”
1 3⁄8”
3”
3”
3”
3”
Simply Woodmark Specification Guide
60 WALL CABINETS: Corner Wall
WALL CABINETS
Corner Wall Cabinets
Corner Wall
Corner Wall
42” High
36” High
Corner Wall cabinets range in height from
18” to 48”.
Corner Wall cabinets are hinged left and
can be reversed in the field.
CW2442
CW2742
To ensure proper door function,
cabinets or other design elements
deeper than 12” should not be placed
on either side of the Corner Wall
cabinet.
If the Corner Wall cabinet is deeper
than the adjacent cabinets, fillers are
recommended for placement left and
right of the Corner Wall to ensure
proper door operation on standard
depth wall cabinets.
■
■
●
●
●
●
CW2442
CW2742
CW2442 SD
CW2742 SD
A
12”
15”
B
24”
27”
■ MI
■ VDO
Three adjustable shelves
Door opening is 11 3⁄4” wide
Features a DR1542 door
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
For a finished, decorative look add
Overlay Fillers (Full Overlay door styles)
to Universal Fillers or Decorative Blocks
to Fluted Beaded Fillers.
Construction Options (see page 25): ■ = Available for selected SKUs
CW2436
CW2736
■
■
●
●
●
●
CW2436
CW2736
CW2436 SD
CW2736 SD
A
12”
15”
B
24”
27”
■ MI
■ VDO
Two adjustable shelves
Door opening is 11 3⁄4” wide
Features a DR1536 door
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
WALL CABINETS: Corner Wall 61
Corner Wall
Corner Wall
30” High
24” High
18” High
WALL CABINETS
Corner Wall
CW2430
CW2730
■
■
●
●
●
●
CW2430
CW2730
CW2430 SD
CW2730 SD
A
12”
15”
B
24”
27”
■ MI
■ VDO
Two adjustable shelves
Door opening is 11 3⁄4” wide
Features a DR1530 door
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
CW2424
CW2724
■
■
●
●
●
●
●
CW2424
CW2724
CW2424 SD
CW2724 SD
A
12”
15”
B
24”
27”
■ MI
■ VDO
One adjustable shelf (non-removable)
Door opening is 11 3⁄4” wide
Features a DR1524 door
Glass Shelf Kit not available
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
CW2418
CW2718
■
■
●
●
●
●
●
CW2418
CW2718
CW2418 SD
CW2718 SD
A
12”
15”
B
24”
27”
■ MI
■ VDO
No shelf
Door opening is 11 3⁄4” wide
Features a DR1518 door
Glass Shelf Kit not available
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Simply Woodmark Specification Guide
62 WALL CABINETS: Corner Wall
Corner Wall
Corner Wall
Corner Wall
with Wood Spin Units
with Plastic Spin Shelves
with Tambour
ORY
FACTALLED
INST
WALL CABINETS
ORY
FACTALLED
INST
A
CWS2430 WD
30 1⁄8”
CWS2436 WD
36 1⁄8”
CWS2442 WD
42 1⁄8”
■
■
■
●
●
●
●
●
●
●
CWS2430 WD
CWS2436 WD
CWS2442 WD
CWS2430 WD SD
CWS2436 WD SD
CWS2442 WD SD
■ MI
■ VDO
Fixed wood spin unit mounted on cabinet floor
30” and 36” high feature one wood spin unit
attached to 3⁄4” adjustable shelf
42” high features two wood spin units attached to
3
⁄4” adjustable shelf
Natural finish wood spin units feature 1” lip and
are 18” in diameter
Door opening is 11 3⁄4” wide
Features a 15” wide door:
CWS2430 WD = DR1530
CWS2436 WD = DR1536
CWS2442 WD = DR1542
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
●
●
●
●
●
CWS2430
CWS2430 SD
■ MI
■ VDO
Features two 18” diameter full round spin shelves
with pole (top shelf adjustable)
Shelves are white high strength plastic
Door opening is 11 3⁄4” wide
Features a DR1530 door
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
Construction Options (see page 25): ■ = Available for selected SKUs
■
●
●
●
●
●
●
●
●
CWT2448
CWT2448 SD
■ MI
■ VDO
Two adjustable shelves
Solid wood tambour door
11 3⁄4” wide x 26 7⁄8” high door opening
11 3⁄4” wide x 15 5⁄16” high tambour frame opening
11 3⁄4” wide x 13 11⁄16” high tambour opening (with
tambour door open)
Features a DR1530 door
Field trimmable in height by 1⁄2” at bottom
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
WALL CABINETS: Corner Wall 63
Corner Wall
with Tambour and Plastic Spin Units
ORY
FACTALLED
INST
ORY
FACTALLED
INST
Wall Easy Reach
WALL CABINETS
Corner Wall
with Tambour and Wood Spin Units
■
●
●
●
●
●
●
●
●
●
●
CWTS2448 WD
CWTS2448 WD SD
■ MI
■ VDO
Fixed wood spin unit mounted on cabinet floor
Features one wood spin unit attached to 3⁄4”
adjustable shelf
Natural finished wood spin units feature 1” lip and
are 18” in diameter
Solid wood tambour door
11 3⁄4” wide x 26 7⁄8” high door opening
11 3⁄4” wide x 15 5⁄16” high tambour frame opening
11 3⁄4” wide x 13 11⁄16” high tambour opening (with
tambour door open)
Features a DR1530 door
Field trimmable in height by 1⁄2” at bottom
Specialty Door cabinets (SD) feature Matching
Interior standard and require a Specialty Door
selection - see page 32 for more details
■
●
●
●
●
●
●
●
●
●
CWTS2448
CWTS2448 SD
■ MI
■ VDO
Features two 18” diameter full round spin shelves
with pole (top shelf adjustable)
Shelves are white high strength plastic
Solid wood tambour door
11 3⁄4” wide x 26 7⁄8” high door opening
11 3⁄4” wide...
Purchase answer to see full attachment
Purchase answer to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.
Explanation & Answer
Review
Review
Anonymous
Just the thing I needed, saved me a lot of time.
Studypool
4.7
Indeed
4.5
Sitejabber
4.4
Similar Content
"start with why", book summary help
summary...
400 word count for each question
1.) Identity Development in Adolescence
James Marcia extended Erikson's work on identity crisis with the concepts of ident...
ISOL 533 UC Running Operation Systems & Data Storage Worksheet
...
Business Homework help
Need help on Introduction to Business homeworkUnit III Homework This homework assignment allows you to practice manag...
Logic (Philosophy)
Question# 1
Part A:
Come up with an
instance of argument that conforms to HS.
Derive the
conclusion fro...
Long Term Liabilities, writing homework help
Within the Discussion Board area, write 300–400 words that respond to
the following questions with your thoughts, ideas...
Classroom Management
Generally, effective learning and teaching cannot take place in a poorly managed classroom. Therefore, it is imperative to...
Answer Final
We are seeing a realized production of about twice the capacity limit, in other words, a plant utilization of 200%. Additi...
Arbitration And Mediation
Conflicts are part and parcel of any relationship or organization, so long as they involve individuals who every once in a...
