Please read and understand this assignment before agreeing to do it.  If you can not follow the instructions I will not pay.  If you can not complete it please don't agree to do it.  I had someone that said they would do this assignment and then never did itINSTRUCTIONS Your answer to this assignment should be double paced, with one inch margins and no more than a 12 pitch font in a MS WORD DOCUMENT. The assignment requires that you use of the text (see attached file) and where required references and readings, which pertain to the topic in question.APA Guidelines CSU requires that students use the APA style for papers and projects. Therefore, the APA rulesfor formatting, quoting, paraphrasing, citing, and listing of sources are to be followed. CSU Grading Rubric for Papers/Projects The course papers will be graded based on the CSU Grading Rubric (see below for the criteria) for all types of papers. In addition, all papers will be submitted for electronic evaluation to rule out plagiarism.  Content:The content is exceptionally clear, focused, and controlled.  Main ideas are relevant, thoughtfully elected, and strongly supported by exceptional support that are appropriate for the objectives of the assignment.Content exceeds required length.Organization: The organization enhances the central idea(s) and supports the development of the topic. The order and structure are strong and enable the reader to move through the text effortlessly. The content contains effective sequencing and transitions.Grammar & Style Conventions:The text demonstrates exceptionally strong control of Standard Written English (SWE) (e.g., punctuation, spelling, capitalization, paragraph breaks, grammar and usage) and uses them effectively to enhance communication. Errors are so few and so minor that they do not impede readability.Resources & References:The source material is properly acknowledged and cited appropriately using APA format. Source material includes an appropriate reference list that contains all of the sources that are cited within the text of the content. Content includes varying and correct quotation integration (ie: paraphrased and directly quoted material is used and cited properly). Sources used are at the appropriate academic level.ASSIGNMENT: Work Related Injury/Stress AnalysisSubmit Parts 1, 2, and 3 as one word document. Separate each part in the document with a page break.Part 1: (minimum of 200 words)Complete the knife analysis exercise on p. 223 of the textbook (link to scanned searchable pdf of associated chapters http://sdrv.ms/1e6sM68. Describe the differences in the knives shown in Figure 11.8. Discuss the results of the analysis and provide reasons why it is important to have so many types of knives.Part 2: (minimum of 200 words)Analyze the effect of each measure in the Equation for heat stress in Table 12.3 on p.235   http://sdrv.ms/1e6sM68 in the textbook: M-W=C+R+EDiscuss what measures would be practical to reduce heat stress, and why some measures would not be practical in the following environments:• A deep underground metal mine where the temperature is 90 degrees with 99% humidity.• An office at 90 degrees and 50% humidity.• Outdoor tennis game at 90 degrees and 50% humidity.Part 3: (minimum of 200 words)Discuss Poulton’s and Broadbent’s Theories on the effects of noise on performance.Discuss the positive and negative effects of noise on:• Repetitive assembly• Performance in problem solving APA formatCourse book: A Guide to Human Factors and ergonomics by Martin Helander, 2006 Taylor & Francis Group. LLC

Please read and understand this assignment before agreeing to do it.  If you can not follow the instructions I will not pay.  If you can not complete it please don't agree to do it. Your answer to this assignment should be double spaced, with one inch margins and no more than a 12 point font in a MS WORD DOCUMENT.  It should include a reference page with at least 2 reference in APA format (see bottom of the page for more details)ASSIGNMENT: Back Belts: You are the Safety Manager at a production manufacturing facility that has had a high number of recordable and reportable back injuries in the warehouse and production areas over the past year and half. The plant manager has assigned you the task of "doing something about it – YESTERDAY." Prepare a short paper on the subject of black belts and their use in preventing back injuries. The paper will review information from at least one manufacturer and you are to review the information available from NIOSH as well. Discuss their use and describe the research on their effectiveness. Would you recommend the use of the belts and under what circumstances as part of your overall approach to the problem at your plant? Are there any requirements or instances where you would not permit the use of these devices? What other materials/ programs/training would you use to supplement the use, or non-use, of back belts? INSTRUCTIONS: The Case Study assignment for this course is based on the material listed above for back belts, and should include the following components: 1. A brief introduction of the topic 2. Background information from at least one manufacturer of back belts 3. Background information from NIOSH 4. Analysis of the key points in the case study answering the key questions identified above 5. Summary of the case study's conclusions and your own opinions The assignment should be a minimum of 2 pages to a maximum of 4 pages, and should be double-spaced. CSU requires that students use the APA format in writing course papers. Therefore, the APA rules for formatting, quoting, paraphrasing, citing, and listing of sources are to be followed. For comprehensive information on APA formatting, you are encouraged to use the Research Database found in the CSU Online Library located in the course menu. The Ebsco Database (Business Source Complete) is the best source of journals for safety related articles.APA Guidelines CSU requires that students use the APA style for papers and projects. Therefore, the APA rulesfor formatting, quoting, paraphrasing, citing, and listing of sources are to be followed. CSU Grading Rubric for Papers/Projects The course papers will be graded based on the CSU Grading Rubric (see below for the criteria) for all types of papers. In addition, all papers will be submitted for electronic evaluation to rule out plagiarism.  Content:The content is exceptionally clear, focused, and controlled.  Main ideas are relevant, thoughtfully elected, and strongly supported by exceptional support that are appropriate for the objectives of the assignment.Content exceeds required length.Organization: The organization enhances the central idea(s) and supports the development of the topic. The order and structure are strong and enable the reader to move through the text effortlessly. The content contains effective sequencing and transitions.Grammar & Style Conventions:The text demonstrates exceptionally strong control of Standard Written English (SWE) (e.g., punctuation, spelling, capitalization, paragraph breaks, grammar and usage) and uses them effectively to enhance communication. Errors are so few and so minor that they do not impede readability.Resources & References:The source material is properly acknowledged and cited appropriately using APA format. Source material includes an appropriate reference list that contains all of the sources that are cited within the text of the content. Content includes varying and correct quotation integration (ie: paraphrased and directly quoted material is used and cited properly). Sources used are at the appropriate academic level.   

Please read and understand this assignment before agreeing to do it.  If you cannot follow the instructions I will not pay.  If you can not complete it please don't agree to do it. Your answer to this assignment should be at least 200 words.  This essay should include an introduction, body, and closing paragraphs as a minimum. It should include at least 2 reference (the text book http://sdrv.ms/14wpkw5 (link to chapter 17-18 of the textbook which are the associated chapters to this question) and an outside source in APA format (see bottom of the page for more details).ASSIGNMENT:Review the presentation in the text dealing with human error; and, in your own words discuss your personal thoughts on the subject, using a separate resource for reference to support your view.INSTRUCTIONS:Your answer to this essay should be 200 words, double-spaced, with one inch margins andno more than a 12 point font.  The assignment requires that you use your text (Course book: A Guide to Human Factors and ergonomics by Martin Helander, 2006 Taylor & Francis Group. LLC http://sdrv.ms/14wpkw5) and at least one other references and readings, which pertain to the topic in question.APA Guidelines CSU requires that students use the APA style for papers and projects. Therefore, the APA rules forformatting, quoting, paraphrasing, citing, and listing of sources are to be followed. CSU Grading Rubric for Written ReponsesContent, Organization, & Grammar:The content is exceptionally clear, focused, relevant, and well suited to the audience andpurpose. Main ideas are clearly written, supported by appropriate resources,and strong details.The organization enhances the central idea(s) and its development. The order and structure are strong and enables the reader to move through the text effortlessly.Grammatical errors are so few and so minor that they do not impede readability.Content exceeds 200 word minimum required length.Resources & References:Source materials are properly identified and cited in APA format. The content is presented withproper in-text and reference citations.The source material includes an appropriate reference list that contains all of the sources thatare cited within the text.The source material includes varying and correct forms of integration (ie: paraphrased and directlyquoted material is used and cited properly).Sources used are at the appropriate academic level.Course book: A Guide to Human Factors and ergonomics by Martin Helander, 2006 Taylor & Francis Group. LLC http://sdrv.ms/14wpkw5Helander, M. (2006). A guide to human factors and   ergonomics. (2 ed.). Boca Raton, FL: CRC Press.