IT 341undefinedSkills Exam IIundefinedInstructions:undefinedYou have been provided with the required addressing table and network topology in a pkt file. Follow the instructions and undefinedDeliverables:undefinedZipped folder containing:undefined Device Interface IP Address Subnet Mask Default Gateway R1 Gi0/0 11.11.11.1 255.255.255.0 NA S0/0/0 14.14.14.1 255.255.255.252 NA S0/0/1 12.12.12.1 255.255.255.252 NA R2 S0/0/0 23.23.23.1 255.255.255.252 NA S0/0/1 12.12.12.2 255.255.255.252 NA R3 Gi0/0 33.33.33.1 255.255.255.0 NA S0/0/0 23.23.23.2 255.255.255.252 NA S0/0/1 34.34.34.1 255.255.255.252 NA R4 Gi0/0 44.44.44.1 255.255.255.0 NA S0/0/0 14.14.14.2 255.255.255.252 NA S0/0/1 34.34.34.2 255.255.255.252 NA PC1 NA 11.11.11.2 255.255.255.0 11.11.11.1 PC3 NA 33.33.33.2 255.255.255.0 33.33.33.1 PC4 NA 44.44.44.2 255.255.255.0 44.44.44.1 undefinedTask 1: Configure Basic Device Settings (10 Points)undefinedStep 1: Setup host name for the routers as given in the topology.undefinedStep 2: Setup enable password: classundefinedStep 3: Setup line console password: ciscoundefinedTask 2: Configure and verify OSPF Routing (40 Points)undefinedStep 1: Configure OSPF as the routing protocol on all four routers and advertise the appropriate networks using the network statement. (hint: determine the connected networks for each router and advertise them through OSPF.) You need to use PROCESS ID: 100 and Area: 0 in your OSPF configurations. (15 points)undefinedStep 2: Prevent routing updates on the interfaces of R1 on which routing advertisements are not required. (hint: you should use passive-interface command for the LAN interface.) (10 points)undefinedStep 3: Verify that OSPF is running on the routers. Which command would you use to confirm that OSPF is running? (10 points)undefinedStep 4: Examine the routing tables on all routers. What command should you use to examine the routing table content? (5 points)undefinedTask 3: Configure Static Routing (30 Points)undefinedStep 1: From R4 OSPF configuration, remove the LAN network 44.44.44.0/24.(5 points)undefinedStep 2: Configure static routes on R1 and R2 to reach to network 44.44.44.0/24 with S0/0/0 as the next hop. (10 points)undefinedStep 3: Configure static route on R3 to reach to network 44.44.44.0/24 with S0/0/1 as the next hop. (5 points)undefinedStep 4: Verify the routing configuration by viewing the routing tables of R1, R2 and R3. How can you confirm from the routing tables that all static routes have been added correctly? (10 points)undefinedTask 4: Saving your Configurations and Restart the Devices (5 Points)undefinedSave your configuration by using the proper save command on the routers. Now, click on ‘Power Cycle Devices’ to restart the network. Please make sure to save your configuration before restarting your devices. undefinedTask 5: Verify Connectivity (15 points) undefinedTo verify connectivity, you should be able to ping between all the devices. undefined From To Fail/Pass PC1 PC3 PC1 PC4 PC3 PC4