Use provided checklist document and complete the assignment below

User Generated

znievpx0077

Writing

Description

The standards in Subpart S are consistently in the top 10 in OSHA’s most frequently cited standards lists and highest penalties assessed lists. The standards in Subpart S are complex and often misunderstood—even by professional electricians.

Use the checklist PROVIDED to conduct an electrical safety inspection of your workplace (Machine Shop).

Add the citation for the OSHA standard for each question.

In the comments section for each item, include your recommendations for correcting the violations. If a checklist item does not apply to your organization, explain why in the comments.

In the summary section at the end of the checklist, discuss the significance of any noncompliance you found, and identify the types of injuries that might result if the violations are left uncorrected. If you did not find any noncompliance, discuss what your organization does to prevent electrical safety violations and electrical injuries.

Compile the checklist information into a report that outlines the major issues, if any, found in your workplace. The case study should be a minimum of two pages in length (double-spaced), including the completed checklist.

The report must follow APA guidelines for formatting, and the report must include a title page and reference page. Information about accessing the grading rubric for this assignment is provided below.

Unformatted Attachment Preview

UNIT VI ASSIGNMENT: ELECTRICAL SAFETY INSPECTION STUDENT NAME: QUESTION DATE: YES NO OSHA STANDARD 1 Are portable electrical tools and equipment grounded or of 1910.304(g)(6)(vi)(C)(3) 1910.304(g)(6)(vii)(B) 2 Are electrical appliances (e.g., vacuum cleaners, polishers, 1910.304(g)(6)(iii) 3 Are exposed wiring and cords with frayed or deteriorated 1910.305(a)(2)(x) 4 Are flexible cords and cables free of splices or taps? 1910.305(g)(2)(ii) 5 In wet or damp locations, are electrical tools and equipment 1910.304(g)(6)(vi)(C)(7) 6 Are all disconnecting switches and circuit breakers labeled to 1910.303(f)(2) 7 Are all energized parts of electrical circuits and equipment 1910.303(g)(2)(i) 8 Is sufficient access and working space provided and 1910.303(g)(1)(i) the double-insulated type? vending machines) grounded? insulation repaired or replaced promptly? appropriate for the use or location or otherwise protected? indicate their use or equipment served? guarded against accidental contact by approved cabinets or enclosures? maintained around all electrical equipment to permit ready and safe operations and maintenance? COMMENT UNIT VI ASSIGNMENT: ELECTRICAL SAFETY INSPECTION 9 Are all unused openings (including conduit knockouts) in 1910.305(b)(1)(ii) electrical enclosures and fittings closed with appropriate covers, plugs, or plates? 10 Are electrical enclosures (e.g., switches, receptacles, junction boxes) provided with tight-fitting covers or plates? SUMMARY: 1910.305(b)(2)(i)
Purchase answer to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Explanation & Answer

Please let me know if there is anything needs to be changed or added. I will be also appreciated that you can let me know if there is any problem or you have not received the work. Please let me know if there is anything needs to be changed or added. I will be also appreciated that you can let me know if there is any problem or you have not received the work Good luck in your study and if you need any further help in your assignments, please let me know Can you please confirm if you have received the work? Once again, thanks for allowing me to help you R P.S: Studypool is facing high level of traffic which may delay the downloading process. MESSAGE TO STUDYPOOL NO OUTLINE IS NEEDED

Running head: ANALYSIS OF THE COMPLIANCE WITH OSHA STANDARDS

Analysis of the Compliance with OSHA Standards
(Name)
(Course)
(Date)

1

ANALYSIS OF THE COMPLIANCE WITH OSHA STANDARDS

2

Analysis of the Compliance with OSHA Standards
Machine Shop established 25 years ago in Park Royal (London). During these 25 years,
the company has participated in approximately 6,000 projects, in which they assist companies of
any type in the cr...


Anonymous
Excellent resource! Really helped me get the gist of things.

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4

Similar Content

Related Tags