ENGR 1201 Gantt Chart Questions

Content type

User Generated

Subject

Engineering

Course

ENGR 1201

Type

Worksheet

Uploaded By

anannxnz

Pages

2

Rating

Professor Edmund Morris

ENGR 1201

Assignment 8

Nana Akosua Antwi

1) A team of students prepared an oral defense for their design project contained only the

following items: a statement of the problem and the final detailed design. What else should they

have included?

Answer: They should have included a title, outline of presentation, important design

requirements, Alternative concepts, final concept and a summary.

2) In Chapter 20 we discussed Gantt charts as a way if planning your design activities. It can also be

used to develop manufacturing and testing strategies. Suppose you are in a design team with

three other students (Sara, Jim and Leslie) and are beginning to construct (i.e., manufacture)

your design. Develop a Gantt chart that will show the responsibilities and deadlines for each

student (including yourself) for the following activities: 1) talk to a machinist for advise on

making unique components of your design, 2) search for components on the Internet or in

hardware stores (wheels, bolts, etc.), 3) collect receipts for purchases, 4) keep drawings up to

date, 5) assemble the components to make a working model of the design.

Ans:

Gantt chart

Day of Project

Activity

Start

day

Number of

days

1 3 10 15 20 30

Talk to

Machinist

(Sara)

1

3

Search for

Components

on the

internet or

in hardware

stores (All)

5

10

Collect

receipts for

Purchase

(Nana)

10

4

Sign up to view the full document!

Sign up to view the full document!

Unformatted Attachment Preview

Professor Edmund Morris ENGR 1201 Assignment 8 Nana Akosua Antwi 1) A team of students prepared an oral defense for their design project contained only the following items: a statement of the problem and the final detailed design. What else should they have included? Answer: They should have included a title, outline of presentation, important design requirements, Alternative concepts, final concept and a summary. 2) In Chapter 20 we discussed Gantt charts as a way if planning your design activities. It can also be used to develop manufacturing and testing strategies. Suppose you are in a des ...
Purchase document to see full attachment

Tags: Gantt Charts design team balsa wood Plywood design important design requirements

User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Review

Review

Anonymous

Just what I needed. Studypool is a lifesaver!

Studypool

4.7

Indeed

4.5

Sitejabber

4.4

24/7 Study Help

Stuck on a study question? Our verified tutors can answer all questions, from basic math to advanced rocket science!

Case Study Analysis

Case Study Analysis

ENGG 5202 University of Leeds Circular Economy of Mobile Phones Report

Individual assignment:Identify a process or product that is of interest to you or that you make consider a product/process ...

ENGG 5202 University of Leeds Circular Economy of Mobile Phones Report

Individual assignment:Identify a process or product that is of interest to you or that you make consider a product/process that currently has a negative impact on our environment. Apply what you learnt about the ‘circular economy’ to the product/process to help eliminate or minimise waste and the continual use of resources. Describe the product’s/process’s current manufacturing processes and it’s input and outputs. Assess the process’s steps in terms of sustainability. Identify key areas where you propose improve or change. The proposed approach could look at any aspect of ‘reuse, sharing, repair, refurbishment, remanufacturing and recycling’ to create a close-loop system in order to minimise the use of any or all of (a) resource inputs, (b) waste creation, (c) pollution and (d) carbon emissions. The true impact of many proposed ‘circular economy’ proposals are debated as being too simplistic which do not consider the complexity of existing systems. Therefore. critique your own design/proposed changes and argue the advantage that such an approach may have on the current designs. Identify limitations or challenges that your approach may have. Report criteria: A written report (<4,000 words) The use of flow diagrams and figures is encouraged.

5 pages

Capacitors And Inductors

An inductor is a passive component typically used as a basic component in electric circuits. It stores energy in a magneti ...

Capacitors And Inductors

An inductor is a passive component typically used as a basic component in electric circuits. It stores energy in a magnetic field created by a coil ...

11 pages

Electrical Engineering

Answer the following questions about the sequence of instructions: Assuming all possible forwarding paths, always-not-take ...

Electrical Engineering

Answer the following questions about the sequence of instructions: Assuming all possible forwarding paths, always-not-taken policy for branch ...

University of South Florida Highway Engineering Drawing Task

This part of the coursework (part 2) is based on the highway infrastructure relating to a new housing development in Leeds ...

University of South Florida Highway Engineering Drawing Task

This part of the coursework (part 2) is based on the highway infrastructure relating to a new housing development in Leeds. The site is situated on the urban fringes of Whinmoor, approximately 7km north-east of Leeds City centre and a walk of 1.4 miles to the local centre of Seacroft. The site is off the A64 York Road from which the primary access into the site will be taken. The site is triangular in shape and has an overall area of approximately 16 hectares. With reference to the Designer’s outline drawing (HDC/716406A/011/01), discuss the factors you believe have been considered in the location of the access road shown. (10 marks)Discuss the factors which affect the capacity of a road such as the main A64 York Road between chainages 0 and 300. (10 Marks)Identify what other junction types could have been used at this location. Compare and contrast these with the signal-controlled junction chosen by the Designer. You may use a table to present your answer. (10 marks)Killian Ngong, the module lecturer has argued that a roundabout would have been a better option for this development access. Using route location principles, and the scaled plan provided, sketch a suitable alignment for your proposed access road into the development site incorporating a roundabout at the junction. This should extend for a minimum of 150m into the development and include a turning facility within the development site for construction vehicles. (15 Marks)Draw a suitable horizontal alignment showing the main road and your access road including the roundabout option. The drawing should show the alignment 150m either side of your junction. Use different colours to show the carriageway, footway and verge areas. You should also label the lane widths and key dimensions, as well as show clearly your proposals for dealing with the existing bridge and the river. (25 Marks)Using the spot levels on the topographical survey drawing, design a suitable vertical alignment of the access road and the realigned main road. Produce a typical cross-section of the access road and two further cross sections on the main road either side of your proposed junction. (15 Marks)Using the method prescribed by TRRL LR1132, the structural design of bituminous roads, design a suitable pavement for your road and produce a detailed cross-section given the following additional information:AADF at opening =F0= 900 cv/d (assumed each way)Growth rate = 2%Design life = 40 yearsOpening in 2020Sub-grade CBR = 5%Foundation Class 3

Slump Test Comparation ASTM C143 C172 Vs Actual Slump Test Paper

For this problem, review the actual ASTM standard and compare it to the simplified procedure covered on page 208 of the m ...

Slump Test Comparation ASTM C143 C172 Vs Actual Slump Test Paper

For this problem, review the actual ASTM standard and compare it to the simplified procedure covered on page 208 of the materials textbook (CON-1: Slump Test of Portland Cement). What are the similarities and difference between the actual ASTM C143 standard and the procedure outlined in CON-1. Are there any items removed in the simplified procedure that are discussed in the actual standard? Be sure to give specifics and the answer should be no two page.

Similar Documents

PETE 206 PMU Rock Permeability Worksheet

GENERAL OUTLINE OF A TECHNICAL REPORT (from the website of Dr. Cahit Erkal, Professor of Physics, Department of Chemistry ...

MECH 3340 Heating Ventilation and Air Conditioning Paper

Hi,I have three phases projects for HVAC that already done which are:✅ phase 1 for heating load✅ phase 2 cooling load�...

Analysis of Material Transport through a Plug Flow Reactor Lab Report 4

it is a water resources lab report, the test is how materials is flow in reactor, read the lab manual first to understand ...

dissertation of 'risk assessment on hydraulic fracturing'

Am well engineer student doing my bachelor year, looking to do my dissertation which is about risk assessment on hydrau...

venturi flume information, homework help

hello this class is fluid and mechanics class and i need report about the venturi flume information about it and if possib...

Please describe, in a few complete sentences the science behind this rapid freezing of the solution upon tapping it on the counter.

https://www.youtube.com/watch?v=n_H5ZIoZSBo Please describe, in a few complete sentences the science behind this rapid fre...

Revision.final Q

This paper discusses the phased array radar systems in detail. The research covered the aspect of parameters and specifica...

Material Of Engineering 8 3

Draw the Mohr’s circle for the stress state......

An engineer is a professional practitioner of the art, concerned with the application of scientific knowledge, mathematics...

Study help

Our tutors provide high quality explanations & answers.

Post question

Case Study Analysis

Case Study Analysis

ENGG 5202 University of Leeds Circular Economy of Mobile Phones Report

Individual assignment:Identify a process or product that is of interest to you or that you make consider a product/process ...

ENGG 5202 University of Leeds Circular Economy of Mobile Phones Report

Individual assignment:Identify a process or product that is of interest to you or that you make consider a product/process that currently has a negative impact on our environment. Apply what you learnt about the ‘circular economy’ to the product/process to help eliminate or minimise waste and the continual use of resources. Describe the product’s/process’s current manufacturing processes and it’s input and outputs. Assess the process’s steps in terms of sustainability. Identify key areas where you propose improve or change. The proposed approach could look at any aspect of ‘reuse, sharing, repair, refurbishment, remanufacturing and recycling’ to create a close-loop system in order to minimise the use of any or all of (a) resource inputs, (b) waste creation, (c) pollution and (d) carbon emissions. The true impact of many proposed ‘circular economy’ proposals are debated as being too simplistic which do not consider the complexity of existing systems. Therefore. critique your own design/proposed changes and argue the advantage that such an approach may have on the current designs. Identify limitations or challenges that your approach may have. Report criteria: A written report (<4,000 words) The use of flow diagrams and figures is encouraged.

5 pages

Capacitors And Inductors

An inductor is a passive component typically used as a basic component in electric circuits. It stores energy in a magneti ...

Capacitors And Inductors

An inductor is a passive component typically used as a basic component in electric circuits. It stores energy in a magnetic field created by a coil ...

11 pages

Electrical Engineering

Answer the following questions about the sequence of instructions: Assuming all possible forwarding paths, always-not-take ...

Electrical Engineering

Answer the following questions about the sequence of instructions: Assuming all possible forwarding paths, always-not-taken policy for branch ...

University of South Florida Highway Engineering Drawing Task

This part of the coursework (part 2) is based on the highway infrastructure relating to a new housing development in Leeds ...

University of South Florida Highway Engineering Drawing Task

This part of the coursework (part 2) is based on the highway infrastructure relating to a new housing development in Leeds. The site is situated on the urban fringes of Whinmoor, approximately 7km north-east of Leeds City centre and a walk of 1.4 miles to the local centre of Seacroft. The site is off the A64 York Road from which the primary access into the site will be taken. The site is triangular in shape and has an overall area of approximately 16 hectares. With reference to the Designer’s outline drawing (HDC/716406A/011/01), discuss the factors you believe have been considered in the location of the access road shown. (10 marks)Discuss the factors which affect the capacity of a road such as the main A64 York Road between chainages 0 and 300. (10 Marks)Identify what other junction types could have been used at this location. Compare and contrast these with the signal-controlled junction chosen by the Designer. You may use a table to present your answer. (10 marks)Killian Ngong, the module lecturer has argued that a roundabout would have been a better option for this development access. Using route location principles, and the scaled plan provided, sketch a suitable alignment for your proposed access road into the development site incorporating a roundabout at the junction. This should extend for a minimum of 150m into the development and include a turning facility within the development site for construction vehicles. (15 Marks)Draw a suitable horizontal alignment showing the main road and your access road including the roundabout option. The drawing should show the alignment 150m either side of your junction. Use different colours to show the carriageway, footway and verge areas. You should also label the lane widths and key dimensions, as well as show clearly your proposals for dealing with the existing bridge and the river. (25 Marks)Using the spot levels on the topographical survey drawing, design a suitable vertical alignment of the access road and the realigned main road. Produce a typical cross-section of the access road and two further cross sections on the main road either side of your proposed junction. (15 Marks)Using the method prescribed by TRRL LR1132, the structural design of bituminous roads, design a suitable pavement for your road and produce a detailed cross-section given the following additional information:AADF at opening =F0= 900 cv/d (assumed each way)Growth rate = 2%Design life = 40 yearsOpening in 2020Sub-grade CBR = 5%Foundation Class 3

Slump Test Comparation ASTM C143 C172 Vs Actual Slump Test Paper

For this problem, review the actual ASTM standard and compare it to the simplified procedure covered on page 208 of the m ...

Slump Test Comparation ASTM C143 C172 Vs Actual Slump Test Paper

For this problem, review the actual ASTM standard and compare it to the simplified procedure covered on page 208 of the materials textbook (CON-1: Slump Test of Portland Cement). What are the similarities and difference between the actual ASTM C143 standard and the procedure outlined in CON-1. Are there any items removed in the simplified procedure that are discussed in the actual standard? Be sure to give specifics and the answer should be no two page.