Access over 20 million homework & study documents

Machine Design Module 2 Worksheet

Content type
User Generated
Subject
Engineering
Type
Worksheet
Rating
Showing Page:
1/2

Sign up to view the full document!

lock_open Sign Up
Showing Page:
2/2

Sign up to view the full document!

lock_open Sign Up
Unformatted Attachment Preview
Machine Design Module 2 (Worksheet) Prepared by: J. Bagacay DEGREES OF FREEDOM ROLLING BODIES 4) Two parallel shafts connected by pure rolling turn in the same direction having a speed ratio of 2.75. What is the distance of the shafts if the smaller cylinder is 22 cm in diameter? a)16.67 cm b)25.25 cm c) 30.25 cm d19.25 cm 4) A 5 ft diameter pulley is turning at 200 rpm. Find the speed of the pulley mid-way of the center and outer surface of the pulley. a) 20.45 ft/s b)24.34 ft/s c)30.45 ft/s d)26.18 ft/s 5)A lineshaft runs at 360 rpm. An 18” pulley on shaft is belt connected to a 12’ pul ...
Purchase document to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Anonymous
Very useful material for studying!

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4