LEARN MORE...

Error Analysis in Design and Operations Essay

Content type

User Generated

Subject

Risk Management

Type

Essay

Uploaded By

ryrtnaprghgbe

Pages

Showing Page:

1/4

Running head: ERROR ANALYSIS IN DESIGN AND OPERATIONS

Error Analysis in Design and Operations

Student’s Name

Institution

Showing Page:

2/4

ERROR ANALYSIS IN DESIGN AND OPERATIONS

Error Analysis in Design and Operations

Tracking of units in aircraft design

It is important to keep track of measurement units both in the design and operation of an

airplane. Continuously tracking these units helps to ensure that the aircraft remains in its best

operation state. That, therefore, makes the pilot be in full control of the aircraft. Having these

units vary from normal could seriously affect factors as the center of gravity of the airplane

which causes instability and is likely to cause accidents (Ackerman et al, 2017). Tracking these

units helps to determine the speed required for takeoff. Failure to give a correct reading may

cause the takeoff to happen too soon resulting in shock or making it prolonged that is likely to

make the aircraft go beyond the runway.

Additionally, a change in units may cause a sharp climb which would make the pilot out

of control causing the aircraft to fall on its back. Therefore, it is paramount that tracking units of

design and operations for all aircraft to make to reduce the likelihood of accidents (Friend &

Friend, 2015).

Accident due to error in metric conversion

A Boeing 767 belonging to Air Canada on the July 29th, 1983 ran out of fuel midair, and

both engines stopped working. However, the pilots made a safe landing touching the ground at a

high speed of 180knots. Only two people were injured. The primary cause of the accident is that

ground engineers knew that the fuel gauge was not functioning. They opted to use drip sticks to

take measurements of fuel. However, when carrying out their mathematical operations, they used

wrong units i.e. instead of Kg to L factor, the engineers used Lb. to L factor (Friend & Friend,

2015). The pilot saw the amount of fuel that the airplane and he okayed it as he thought it was in

Showing Page:

3/4

End of Preview - Want to read all 4 pages?

Access Now

Unformatted Attachment Preview

1 Running head: ERROR ANALYSIS IN DESIGN AND OPERATIONS Error Analysis in Design and Operations Student’s Name Institution 2 ERROR ANALYSIS IN DESIGN AND OPERATIONS Error Analysis in Design and Operations Tracking of units in aircraft design It is important to keep track of measurement units both in the design and operation of an airplane. Continuously tracking these units helps to ensure that the aircraft remains in its best operation state. That, therefore, makes the pilot be in full control of the aircraft. Having these units vary from normal could seriously affect factors as the center of gravity of the airplane which causes instability and is likely to cause accidents (Ackerman et al, 2017). Tracking these units helps to determine the speed required for takeoff. Failure to give a correct reading may cause the takeoff to happen too soon resulting in shock or making it prolonged that is likely to make the aircraft go beyond the runway. Additionally, a change in units may cause a sharp climb which would make the pilot out of control causing the aircraft to fall on its back. Therefore, it is paramount that tracking units of design and operations for all aircraft to make to re ...
Purchase document to see full attachment

Tags: error analysis Design and Operations Aircraft Design Metric Conversion Air Canada