Objectives for this assignment:Ability to get inputs from the textboxes; handle exceptions (using try...catch and parse OR tryparse); handle input validation.Ability to use If and/or Switch statements to check conditions (you can choose any form of selection statements in the applications)Ability to perform operations to obtain outputs from the given inputsAbility to add items to the listbox(es)Ability to use looping to obtain desired outputsAbility to format outputsAbility to zip the projects for project submissionWork on the following programming problems found at the end of the chapter (Note: I have changed most of the requirements for the programming exercises)1 - Distance Calculator3 - Temperature Converter7 - Calories ActivitiesThe sample outputs are found in the pdf file.Download the zipped file, Assignment 6. Extract the zipped file to Assignment 6. Rename the Assignment 6 folder to "Your Name Assignment 6". This folder should contain the three project folders that you will be working on.Note: I am no longer testing your ability to change properties. All the properties on the form and controls have been changed. I have also included the constants to be used in the applications.For each application, provide the appropriate coding for each button as follows:Distance Calculator (points allocated: 18, 15, 4, 3)button Calculate Declare appropriate input and output variables. (Since they are all numbers, you should use double.)Check that a speed is selected from the comboxbox. If no speed is selected, provide an error message, set the focus on the combobox and do NOT continue with the processing. Check that the data entered in the textbox is a number. If error, display an error message, select the data in the textbox and set the focus on the textbox and do NOT continue with the processing.Check that the number is greater than 0. If error, display an error message, select the data in the textbox and set the focus on the textbox. Do not continue with the processing.Calculate distance traveled as follows: Distance = Speed * HourAdd the following to listbox Output: "Miles covered in x hours at y MPH: "Add the following to listbox Distance: z (distance calculated displayed to 1 decimal place)Set the combobox to no item selected and set focus to the comboboxClear the textbox button Get Total DistanceCheck that there is data in the listbox DistanceIf the listbox is empty, display an error message that there is nothing to add and set focus on the comboboxIf the listbox is not empty, use looping to add all the items in the listbox. Display the total distance in a message box with the following information "Total Distance Traveled is zzz Miles" (display total distance to 1 decimal place.button ResetSet the combobox to nothing selectedClear the input textboxClear the output listboxesSet the focus at the comboboxbutton ExitUse a messagebox to confirm that the user wants to exit the applicationTemperature Converter (points allocated: 14, 14, 5, 2)button Convert to FahrenheitDeclare starting and ending °F as integers; declare output °C as double.Check that the starting and ending °F are integers and that ending °F is bigger than starting °F; if error, provide an error message and allow the user to re-enter the data setting the focus on the starting °F. Do NOT continue with the processing. For the valid data entered, display the converted °C in the listbox in steps of 1°F using the formula C = (F - 32)*5/9; output C should be displayed to 1 decimal place. button Convert to CelsiusDeclare starting and ending °C as integers; declare output °F as double.Check that the starting and ending °C are integers and that ending °C is bigger than starting °C; if error, provide an error message and allow the user to re-enter the data setting the focus on the starting °C. Do NOT continue with the processing. For the valid data entered, display the converted °F in the listbox in steps of 1°F using the formula F = 9/5C + 32; output C should be displayed to 1 decimal place. button ResetClear the input textboxClear the output listboxesAdd the headings to the two listboxes Set the focus at the starting °F textboxbutton ExitUse a messagebox to confirm that the user wants to exit the application Calories Activities (points allocated: 18, 15, 4, 3)button EnterDeclare input minutes entered as double and output calories as double.Check that the data entered in the textbox is a number. If error, display an error message, select the data in the textbox and set the focus on the textbox and do NOT continue with the processing.Check that the number is greater than 0. If error, display an error message, select the data in the textbox and set the focus on the textbox. Do not continue with the processing.Calculate calories burned based on the activity selected as follows: Calories burned = Minutes entered * Given Constant for Activity/30Add the following to listbox Activity: Text of the Activity SelectedAdd the following to listbox Minutes: Minutes entered (display to 1 decimal place)Add the following to listbox Calories Burned; Calculated Calories burned (display to 1 decimal place)Set the focus on the first radiobuttonClear the textbox EXTRA CREDIT: Add the activity, minutes and calories burned to a text file which has 3 headings as shown in the listboxes. The text file has to be created in the bin/debug folder (8 points).button SummaryCheck that there is at least one data in the listbox minutes (NOTE: the heading is not data so you will need to check that count is >2)If there is no valid data in the listbox, display an error message that there is nothing to summarize and set the focus on the first radiobuttonIf valid data exists, use looping to add all the items in listbox minutes and listbox calories. Display the summary information in a message box as follows:Total Activity Minutes: xxx (displayed to 1 decimal place)Total Calories Burned: yyy (displayed to 1 decimal place)button ResetSet the focus to the first radiobuttonClear the input textboxClear the output listboxesAdd headings to the 3 listboxesbutton ExitUse a messagebox to confirm that the user wants to exit the applicationObjectives for this assignment:Ability to get inputs from the textboxes; handle exceptions (using try...catch and parse OR tryparse); handle input validation.Ability to use If and/or Switch statements to check conditions (you can choose any form of selection statements in the applications)Ability to perform operations to obtain outputs from the given inputsAbility to add items to the listbox(es)Ability to use looping to obtain desired outputsAbility to format outputsAbility to zip the projects for project submissionWork on the following programming problems found at the end of the chapter (Note: I have changed most of the requirements for the programming exercises)1 - Distance Calculator3 - Temperature Converter7 - Calories ActivitiesThe sample outputs are found in the pdf file.Download the zipped file, Assignment 6. Extract the zipped file to Assignment 6. Rename the Assignment 6 folder to "Your Name Assignment 6". This folder should contain the three project folders that you will be working on.Note: I am no longer testing your ability to change properties. All the properties on the form and controls have been changed. I have also included the constants to be used in the applications.For each application, provide the appropriate coding for each button as follows:Distance Calculator (points allocated: 18, 15, 4, 3)button Calculate Declare appropriate input and output variables. (Since they are all numbers, you should use double.)Check that a speed is selected from the comboxbox. If no speed is selected, provide an error message, set the focus on the combobox and do NOT continue with the processing. Check that the data entered in the textbox is a number. If error, display an error message, select the data in the textbox and set the focus on the textbox and do NOT continue with the processing.Check that the number is greater than 0. If error, display an error message, select the data in the textbox and set the focus on the textbox. Do not continue with the processing.Calculate distance traveled as follows: Distance = Speed * HourAdd the following to listbox Output: "Miles covered in x hours at y MPH: "Add the following to listbox Distance: z (distance calculated displayed to 1 decimal place)Set the combobox to no item selected and set focus to the comboboxClear the textbox button Get Total DistanceCheck that there is data in the listbox DistanceIf the listbox is empty, display an error message that there is nothing to add and set focus on the comboboxIf the listbox is not empty, use looping to add all the items in the listbox. Display the total distance in a message box with the following information "Total Distance Traveled is zzz Miles" (display total distance to 1 decimal place. button ResetSet the combobox to nothing selectedClear the input textboxClear the output listboxesSet the focus at the combobox button ExitUse a messagebox to confirm that the user wants to exit the application Temperature Converter (points allocated: 14, 14, 5, 2)button Convert to FahrenheitDeclare starting and ending °F as integers; declare output °C as double.Check that the starting and ending °F are integers and that ending °F is bigger than starting °F; if error, provide an error message and allow the user to re-enter the data setting the focus on the starting °F. Do NOT continue with the processing. For the valid data entered, display the converted °C in the listbox in steps of 1°F using the formula C = (F - 32)*5/9; output C should be displayed to 1 decimal place. button Convert to CelsiusDeclare starting and ending °C as integers; declare output °F as double.Check that the starting and ending °C are integers and that ending °C is bigger than starting °C; if error, provide an error message and allow the user to re-enter the data setting the focus on the starting °C. Do NOT continue with the processing. For the valid data entered, display the converted °F in the listbox in steps of 1°F using the formula F = 9/5C + 32; output C should be displayed to 1 decimal place. button ResetClear the input textboxClear the output listboxesAdd the headings to the two listboxes Set the focus at the starting °F textbox button ExitUse a messagebox to confirm that the user wants to exit the application Calories Activities (points allocated: 18, 15, 4, 3)button EnterDeclare input minutes entered as double and output calories as double.Check that the data entered in the textbox is a number. If error, display an error message, select the data in the textbox and set the focus on the textbox and do NOT continue with the processing.Check that the number is greater than 0. If error, display an error message, select the data in the textbox and set the focus on the textbox. Do not continue with the processing.Calculate calories burned based on the activity selected as follows: Calories burned = Minutes entered * Given Constant for Activity/30Add the following to listbox Activity: Text of the Activity SelectedAdd the following to listbox Minutes: Minutes entered (display to 1 decimal place)Add the following to listbox Calories Burned; Calculated Calories burned (display to 1 decimal place)Set the focus on the first radiobuttonClear the textbox EXTRA CREDIT: Add the activity, minutes and calories burned to a text file which has 3 headings as shown in the listboxes. The text file has to be created in the bin/debug folder (8 points).button SummaryCheck that there is at least one data in the listbox minutes (NOTE: the heading is not data so you will need to check that count is >2)If there is no valid data in the listbox, display an error message that there is nothing to summarize and set the focus on the first radiobuttonIf valid data exists, use looping to add all the items in listbox minutes and listbox calories. Display the summary information in a message box as follows:Total Activity Minutes: xxx (displayed to 1 decimal place)Total Calories Burned: yyy (displayed to 1 decimal place) button ResetSet the focus to the first radiobuttonClear the input textboxClear the output listboxesAdd headings to the 3 listboxes button ExitUse a messagebox to confirm that the user wants to exit the application

I'm working on this assignment bid only if you know marketing and analysis well and if you can follow instruction, have a look at the instruction before biddingTask DescriptionundefinedYour task in this assignment is to conduct quantitative data analysis and discuss your analysis findings from a marketing researcher's perspective. You will be provided two datasets in Week 9, and for each dataset, you will:undefined Examine the demographic profiles. Test the associations between required variables. Discuss the marketing implications of the analysis findings. undefinedThis assignment should be submitted in a single Word document, has a maximum word limit of 1600, and requires a minimum of 10 references. The Moodle submission of this ast will be due at 5pm AEST Friday Week 12.