Access over 20 million homework & study documents

Cyb 210 project one daevon thompson

Content type
User Generated
Rating
Showing Page:
1/5
6-2 Project One Submission: Network Modification Brief
1
6-2 Project One Submission: Network Modification Brief
Daevon J. Thompson
Daevon.thompson@snhu.edu
Southern New Hampshire University
CYB-210-Q4386 Computer Networking 20EW4

Sign up to view the full document!

lock_open Sign Up
Showing Page:
2/5
6-2 Project One Submission: Network Modification Brief
2
The first step that I will be taking is placing the wireless router, phone and tablet in the
appropriate wireless area. In order to do so I have to click on the switch under “Config.” then the
“VLAN” section. Next, I must add VLAN 70 and 80. Some have already been done such as
VLAN 50 and 150. Switch fa 0/3 has been connected to the wireless router now that’s done I can
configure the router. IP address 192.168.70.10 must be entered, in order to do so you must go
under the LAN tab. The internet section must be set to DHCP. The SSID must be changed to
“Guest” I can do this by going under the wireless tab, in addition to this step I must ensure that
the authentication has been disabled. On the GUI tab ensure the internet connection is set to
DHCP with an IP address of 192.168.70.10. Enable the server which is located in DHCP server
setting followed by entering 10 and 70 from the IP address, with 10 being the lowest and 70
being the maximum then save that setting. The gateway section must be set to DHCP. Under the
wireless tab ensure the SSID is set to “Guest”. Once completed the Gateway will be generated,
the gateway is 192.168.70.12. Now we have our IP Addresses for the tablet and phone by
following the same steps. Tablet IP Address is 192.168.70.11 and the phone IP address is
192.168.70.10. With successfully pinging the phone and tablet this section is now configured
properly.
Next will be the video camera area which is where both cameras will be placed. The
cameras will be connected to fa 0/1 and fa 0/2 which is the VLAN 80. The gateway has been
created properly for these devices; the gateway is 192.168.80.1. I then changed the names of the
camera devices to “Waiting Area” and “Front Desk” and added the IP addresses those are;
192.168.80.9 and 192.168.80.10.

Sign up to view the full document!

lock_open Sign Up
Showing Page:
3/5

Sign up to view the full document!

lock_open Sign Up
End of Preview - Want to read all 5 pages?
Access Now
Unformatted Attachment Preview
6-2 Project One Submission: Network Modification Brief 6-2 Project One Submission: Network Modification Brief Daevon J. Thompson Daevon.thompson@snhu.edu Southern New Hampshire University CYB-210-Q4386 Computer Networking 20EW4 1 6-2 Project One Submission: Network Modification Brief The first step that I will be taking is placing the wireless router, phone and tablet in the appropriate wireless area. In order to do so I have to click on the switch under “Config.” then the “VLAN” section. Next, I must add VLAN 70 and 80. Some have already been done such as VLAN 50 and 150. Switch fa 0/3 has been connected to the wireless router now that’s done I can configure the router. IP address 192.168.70.10 must be entered, in order to do so you must go under the LAN tab. The internet section must be set to DHCP. The SSID must be changed to “Guest” I can do this by going under the wireless tab, in addition to this step I must ensure that the authentication has been disabled. On the GUI tab ensure the internet connection is set to DHCP with an IP address of 192.168.70.10. Enable the server which is located in DHCP server setting followed by entering 10 and 70 from the IP address, with 10 being the lowest and 70 being the maximum then save that setting. The gateway section must be set to DHCP. Under the wireless tab ensure the SSID is set to “Guest”. Once completed the Gateway will be generated, the gateway is 192.168.70.12. Now we have our IP Addresses for the table ...
Purchase document to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Anonymous
Great study resource, helped me a lot.

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4