As a network engineer for Kamehameha Institute, you will need to become familiar with the Packet Tracer simulation tool from Cisco. Packet Tracer is used to simulate and test network configurations. This allows you to work out and improve upon the settings before implementing them.Using the diagram and configuration information from your first task, create a Packet Tracer simulation. The same IP scheme should be followed. VLANs should be created with sub-interfaces on the router to help route that traffic or the trunk ports between the switches. Each device should be placed on the right VLAN per the requirements, implementing routing, as well as across the WAN.

CompetenciesIn this project, you will demonstrate your mastery of the following competencies:Apply database systems concepts and principles in the development of a client/server applicationDevelop client-side code that interfaces with databasesScenarioYou work for Global Rain, a software engineering company that specializes in custom software design and development. Your team has been assigned to work on a project for an innovative international rescue-animal training company, Grazioso Salvare. You have been made the lead developer on this project.As part of its work, Grazioso Salvare identifies dogs that are good candidates for search-and-rescue training. When trained, these dogs are able to find and help to rescue humans or other animals, often in life-threatening conditions. To help identify dogs for training, Grazioso Salvare has reached an agreement with a non-profit agency that operates five animal shelters in the region around Austin, Texas. This non-profit agency will provide Grazioso Salvare with data from their shelters.In meeting with the client, you have discovered that they look for certain profiles in dogs to train. For example, search-and-rescue training is generally more effective for dogs that are no more than two years old. Additionally, different breeds of dogs are proficient at different types of rescue, such as water rescue, mountain or wilderness rescue, locating humans after a disaster, or finding a specific human by tracking their scent.Grazioso Salvare is seeking a software application that can work with existing data from the animal shelters to identify and categorize available dogs. Global Rain has contracted for a full stack development of this application, including a database and a client-facing web application dashboard through which users at Grazioso Salvare will access the database.In the initial phases of this development, you developed a database and a Python module enabling CRUD functionality for MongoDB. For Project Two, you will complete the development of this project by coding the dashboard and the database interface logic. This will include dashboard attributes. The dashboard must be a user-friendly, intuitive interface that will reduce user errors and training time.Additionally, Grazioso Salvare has requested that the code for this project be open source and accessible on GitHub, so that it may be used and adapted by similar organizations. To that end, they have asked that you also create a README file that documents and provides instructions for reproducing the project.DirectionsWeb Application Dashboard (Python Code)After successful completion of previous milestones and Project One, you have created a database and established successful CRUD routines in Python for MongoDB. For Project Two, you will now create a fully functional MongoDB dashboard. This will allow the client, Grazioso Salvare, to interact with and visualize the database.To create the dashboard, you will create the different components in Python code. Dashboard web applications lend well to the MVC design pattern. Using this design pattern, the model is contained and accessed in MongoDB, the views are dashboard widgets, and the controller uses your CRUD Python module for queries as part of the interaction between components. You will also be required to test and deploy the dashboard, taking screenshots to show that each of the components executes successfully.Before developing the Python code for the dashboard, be sure to review the Dashboard Specifications Document provided by the UI/UX developer at Global Rain. This document is located in the Supporting Materials section and will provide you with examples of the different dashboard widgets you will create:Interactive options to filter the Austin Animal Center Outcomes data setA data table which dynamically responds to the filtering optionsA geolocation chart and a second chart of your choice that dynamically respond to the filtering optionsIn addition to the widgets, you have been asked to include the Grazioso Salvare logo and a unique identifier containing your name somewhere on the dashboard. A high-resolution copy of the logo is included in the Supporting Materials section.Next, you will begin developing the Python code for your dashboard. Starter code is contained in the ProjectTwoDashboard.ipynb file, linked in the What to Submit section. Start by creating a data table on the dashboard which shows an unfiltered view of the Austin Animal Center Outcomes data set. To populate the data onto your table, utilize your previous CRUD Python module from Project One to run a “retrieve all” query and bring in the data from MongoDB.Tip: Be sure to consider your client when creating the interactive data table. Consider optional features that will make the table easier to use, such as limiting the number of rows displayed, enabling pagination (advanced), enabling sorting, and so on.Note: If you completed the Module Six Milestone, you have already completed this step. Copy your code for the data table into the ProjectTwoDashboard.ipynb file.Next, you will make sure that the dashboard filter options can properly retrieve data from the database. Start by developing database queries that match the required filter functionality. Refer to the Rescue Type and Preferred Dog Breeds Table, located in the Dashboard Specifications Document, to help you construct these queries.Note: Be sure to utilize your previous CRUD Python module (a PY file) from Project One to develop these database queries. You will need to hard code in the username/password for the “aacuser” account as part of the CRUD Python module class instantiation.You must develop the controller pieces to create interactive options that allow for the selection of data based on your filtering functions (such as radio items or drop-downs). Develop these pieces in your IPYNB file, and be sure to import and use your CRUD Python module queries from Step 3. These interactive options will enable the control of other dashboard widgets, such as the data table and charts.Tip: You may choose any interactive option that you wish, such as radio items, a drop-down menu, and so on, as long as the client is able to intuitively use the interactive option to filter the data. Refer to the Dash Core Components reading from the module resources to help you set up these options.Next, you must modify or create the dashboard widgets that receive input from the interactive options and present those dynamic updates to the client. Be sure to modify or create these widgets in your IPYNB file. Specifically, you must do the following:Modify the data table you created in Step 2 so that it is an interactive data table that responds to input from the interactive options.Create charts that display data in response to updates from the data table. As outlined in the Dashboard Specifications Document, you are required to create, at minimum, a geolocation chart and a second chart of your choice.Note: If you completed the Module Six Milestone, you have already begun work on this step by creating the geolocation chart. Copy your code into the ProjectTwoDashboard.ipynb file. You will need to make sure that this chart receives updates from the interactive options.Finally, after developing all of your code, you must test and deploy the dashboard to make sure that all of your components work. To complete this step, run your IPYNB file. You must either take screenshots or create a screencast of your dashboard and widget functionality. Each of your screenshots or your screencast should contain the Grazioso Salvare logo and your unique identifier. Your screenshots or screencast must show the following:The starting state of your dashboard, which should include your widgets for the interactive options to filter data (such as radio items or drop-downs), the interactive data table, and the chartsExecutions of your dashboard, showing the widgets after each of the following data filters has been applied (four screenshots total):Water RescueMountain or Wilderness RescueDisaster or Individual TrackingReset (returns all widgets to their original, unfiltered state)You will include all of these screenshots, or your screencast, in your README file when describing the functionality of your project. These screenshots are required as they demonstrate proof of your dashboard’s functionality.README FileGrazioso Salvare has requested documentation to accompany the code for your dashboard. This will ensure that they are able to understand the work that was completed and more easily maintain the code for this project.You have been asked to create a README file that documents the project and includes instructions for reproducing the project. Be sure to address all of the following areas:Describe the required functionality of the project. Include the screenshots or screencast taken while testing and deploying your dashboard (Step 6) as proof that you have achieved the required functionality.Describe the tools used to achieve this functionality and a rationale for why these tools were used.Be sure to explain why MongoDB was used as the model component of the development, including what specific qualities or capabilities it provides for interfacing with Python.Be sure to explain the Dash framework that provides the view and controller structure for the web application.Be sure to include links to any resources or software applications that were accessed or used.Explain the steps that were taken to complete the project.Identify any challenges that were encountered and explain how those challenges were overcome.What to SubmitTo complete this project, you must submit the following:Web Application Dashboard (Python Code)Submit a zipped folder containing all of the code for your dashboard. The zipped folder should include your completed ProjectTwoDashboard.ipynb file containing the source code for your dashboard. Be sure to also include the code for the CRUD Python module (PY file) that you originally developed in Project One. All code files should follow industry standard best practices, including well-commented code.READMEYour submission should be a Word document that documents the project and provides instructions for reproducing it. In your README file, be sure to include all required screenshots (or your screencast) to demonstrate the functionality of your dashboard.

For this assignment, review the article:Abomhara, M., & Koien, G.M. (2015). Cyber security and the internet of things: Vulnerabilities, threats, intruders, and attacks. Journal of Cyber Security, 4, 65-88. Doi: 10.13052/jcsm2245-1439.414and evaluate it in 3 pages (800 words), using your own words, by addressing the following:What did the authors investigate, and in general how did they do so?Identify the hypothesis or question being testedSummarize the overall article.Identify the conclusions of the authorsIndicate whether or not you think the data support their conclusions/hypothesisConsider alternative explanations for the resultsProvide any additional comments pertaining to other approaches to testing their hypothesis (logical follow-up studies to build on, confirm or refute the conclusions)The relevance or importance of the studyThe appropriateness of the experimental designWhen you write your evaluation, be brief and concise, this is not meant to be an essay but an objective evaluation that one can read very easily and quickly. Also, you should include a complete reference (title, authors, journal, issue, pages) you turn in your evaluation. This is good practice for your literature review, which you’ll be completing during the dissertation process.Your paper should meet the following requirements:Be approximately three pages in length, not including the required cover page and reference page. (Remember, APA is double spaced)Follow APA 7 guidelines. Your paper should include an introduction, a body with fully developed content, and a conclusion.Support your answers with the readings from the course and at least two scholarly journal articles to support your positions, claims, and observations, in addition to your textbook. The UC Library is a great place to find resources.Be clear and well-written, concise, and logical, using excellent grammar and style techniques. You are being graded in part on the quality of your writing.