Access over 20 million homework & study documents

Case study ee2258

Content type
User Generated
Type
Study Guide
Rating
Showing Page:
1/61
SYLLABUS
EE 2258 LINEAR AND DIGITAL INTEGRATED CIRCUITS LABORATORY
AIM:
To study various digital & linear integrated circuits used in simple
system configuration.
LIST OF EXPERIMENTS:
1. Study of Basic Digital IC’s.
Verification of truth table for AND, OR, EXOR, NOT, NOR, NAND, JK FF,
RS FF, D FF)
2. Implementation of Boolean Functions, Adder/ Subtractor circuits.
3.a). Code converters, Parity generator and parity checking, Excess 3, 2s
Complement, Binary to gray code using suitable IC’s .
b) Encoders and Decoders: Decimal and Implementation of 4-bit shift registers in
SISO,SIPO,PISO,PIPO modes using suitable IC’s.
4. Counters: Design and implementation of 4-bit modulo counters as synchronous
and asynchronous types using FF IC’s and specific counter IC.
5. Shift Registers: Design and implementation of 4-bit shift registers in SISO,
SIPO,PISO, PIPO modes using suitable IC’s.
6. Multiplex/ De-multiplex : Study of 4:1; 8:1 multiplexer and Study of 1:4; 1:8
demultiplexer
7. Timer IC application.
Study of NE/SE 555 timer in Astable, Monostable operation.
8. Application of Op-Amp-I
Slew rate verifications, inverting and non-inverting amplifier, Adder,
comparator,Integrator and Differentiator.
9. Study of Analog to Digital Converter and Digital to Analog Converter:
Verification
of A/D conversion using dedicated IC’s.
10. Study of VCO and PLL ICs
i. Voltage to frequency characteristics of NE/ SE 566 IC.
ii. Frequency multiplication using NE/SE 565 PLL IC.
P = 45 Total = 45

Sign up to view the full document!

lock_open Sign Up
Showing Page:
2/61
Expt. No.1 APPLICATIONS OF OP-AMP - I
( INVERTING AND NON INVERTING AMPLIFIER)
1. a. INVERTING AMPLIFIER
AIM:
To design an Inverting Amplifier for the given specifications using Op-Amp
IC 741.
APPARATUS REQUIRED:
S.No
Name of the Apparatus
Range
Quantity
1.
Function Generator
3 MHz
1
2.
CRO
30 MHz
1
3.
Dual RPS
0 30 V
1
4.
Op-Amp
IC 741
1
5.
Bread Board
1
6.
Resistors
As required
7.
Connecting wires and probes
As required
THEORY:
The input signal V
i
is applied to the inverting input terminal through R
1
and
the non-inverting input terminal of the op-amp is grounded. The output voltage V
o
is fed back to the inverting input terminal through the R
f
- R
1
network, where R
f
is
the feedback resistor. The output voltage is given as,
V
o
= - A
CL
V
i
Here the negative sign indicates that the output voltage is 180
0
out of phase
with the input signal.
PRECAUTIONS:
1. Output voltage will be saturated if it exceeds ± 15V.
PROCEDURE:
1. Connections are given as per the circuit diagram.
2. + V
cc
and - V
cc
supply is given to the power supply terminal of the Op-Amp
IC.

Sign up to view the full document!

lock_open Sign Up
Showing Page:
3/61

Sign up to view the full document!

lock_open Sign Up
End of Preview - Want to read all 61 pages?
Access Now
Unformatted Attachment Preview
SYLLABUS EE 2258 LINEAR AND DIGITAL INTEGRATED CIRCUITS LABORATORY AIM: To study various digital & linear integrated circuits used in simple system configuration. LIST OF EXPERIMENTS: 1. Study of Basic Digital IC’s. Verification of truth table for AND, OR, EXOR, NOT, NOR, NAND, JK FF, RS FF, D FF) 2. Implementation of Boolean Functions, Adder/ Subtractor circuits. 3.a). Code converters, Parity generator and parity checking, Excess 3, 2s Complement, Binary to gray code using suitable IC’s . b) Encoders and Decoders: Decimal and Implementation of 4-bit shift registers in SISO,SIPO,PISO,PIPO modes using suitable IC’s. 4. Counters: Design and implementation of 4-bit modulo counters as synchronous and asynchronous types using FF IC’s and specific counter IC. 5. Shift Registers: Design and implementation of 4-bit shift registers in SISO, SIPO,PISO, PIPO modes using suitable IC’s. 6. Multiplex/ De-multiplex : Study of 4:1; 8:1 multiplexer and Study of 1:4; 1:8 demultiplexer 7. Timer IC application. Study of NE/SE 555 timer in Astable, Monostable operation. 8. Application of Op-Amp-I Slew rate verifications, inverting and non-inverting amplifier, Adder, comparator,Integrator and Differentiator. 9. Study of Analog to Digital Converter and Digital to Analog Converter: Verification of A/D conversion using dedicate ...
Purchase document to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

Anonymous
Awesome! Perfect study aid.

Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4