Description
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.
Explanation & Answer
This is because the Simple Volume PART1 is a FAT32 volume on a dynamic disk. You can extend a simple volume only if the file system is NTFS.
Refer to this microsoft article explaining this.
http://support.microsoft.com/kb/225551
Completion Status:
100%
Review
Review
Anonymous
Very useful material for studying!
Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4
24/7 Homework Help
Stuck on a homework question? Our verified tutors can answer all questions, from basic math to advanced rocket science!
Most Popular Content
CIS 510 Leeds Metropolitan University Information Gathering Techniques Report
Create a report for your Manager on Information-Gathering Techniques.Gathering information for a new system is important a ...
CIS 510 Leeds Metropolitan University Information Gathering Techniques Report
Create a report for your Manager on Information-Gathering Techniques.Gathering information for a new system is important and sets the tone of the development cycle. If not done thoroughly, the project could be a failure before it begins.You are the Project Manager of XYZ Enterprises. Your manager gives you the task of researching the different techniques used to gather information as the company is going to replace their Case Management System. He would like a report of all the different type of information gathering listed below. For each technique, give reasons to use it and the best ways to accomplish using each information-gathering method.Interviewing individuals and stakeholders.Distributing and collecting questionnaires.Observing and documenting business procedures.Collecting active individuals comments and suggestions.Researching vendor solutions.This course requires the use of Strayer Writing Standards. For assistance and information, please refer to the Strayer Writing Standards link in the left-hand menu of your course.The specific course learning outcome associated with this assignment is:Research the techniques used to collect and gather information for the design of a new system.ASSIGNMENT CLARIFICATIONWeek 2 Assignment 1 is due this week it is worth 100 points or 10% of your overall grade in the class. SO READ THIS TO GET A PERFECT GRADE ON THIS ASSIGNMENT. The grading criteria are as follows as per the rubric.I do not want to read your paper multiple times to pull out the gradable material. I also do not have page amounts. Answer each of the different information gathering techniques fully. If it is not fully answered I will deduct. Just make the HEADERS of the paper sections numbered 1-5 (taken from the grading rubric) and answer each question in order. Make a reference section at the end in the proper format for the minimum 3 references. 1. Researched: Gave reasons for use and best practices using: Interviewing individuals and Stakeholders (17 Points)2. Researched: Give reasons for use and best practices using distribution and collecting questionnaires. (17 Points)3. Researched: Give reasons for use and best practices using observing and documenting business procedures. (17 Points)4. Researched: Give reasons for use and best practices using collecting active individuals comments and suggestions. (17 Points)5. Researched: Give reasons for use and best practices using researching vendor solutions. (17 Points)6. Use at least 3 Quality Resources. (5 Points) 7. Clarity and writing mechanics. (10 Points)individuals
14 pages
Project 4 Human Resource Insider Threat Guidelines
With the evolving and dynamic workplace, insider threats are common issues organizations face when employees develop malic ...
Project 4 Human Resource Insider Threat Guidelines
With the evolving and dynamic workplace, insider threats are common issues organizations face when employees develop malicious intentions towards ...
Read the case PDF and Describe controls that should be applied to either of LAN-to-WAN or WAN domains. Include applicable tools and procedures.
Requirements:3 pages in length (excluding abstract, cover page, and reference list)At least 3 cited sourcesPlease make sur ...
Read the case PDF and Describe controls that should be applied to either of LAN-to-WAN or WAN domains. Include applicable tools and procedures.
Requirements:3 pages in length (excluding abstract, cover page, and reference list)At least 3 cited sourcesPlease make sure to credit all of your sources; no plagiarism! If you fail to credit your sources, you will get no points and no chance to redoAPA format
GCU Risk Assessment Matrix Template Worksheet
Planning is a quintessential bedrock of any program in the professional world. IT and cybersecurity are no different in th ...
GCU Risk Assessment Matrix Template Worksheet
Planning is a quintessential bedrock of any program in the professional world. IT and cybersecurity are no different in this foundation. We plan for the worst and hope for the best.For College of Science, Engineering and Technology students enrolled in the course, this assignment will be Phase 1 in the creation of your "Programmatic Business Continuity Plan Project” that will be completed in stages throughout your programmatic courses. The project will be finalized and submitted in CYB-690 or ITT-660, depending on your major. Review “Business Continuity Plan (BCP)” and the topic Resources for details about the project.As you begin the project, it is important to select an industry that is of interest to you. You may select virtually any industry including retail, education, telecommunications, health care, finance, etc. Create a fictional business within this industry to be the basis for your project. As you develop your project, imagine yourself in the role of the Chief Intelligence Officer for Master of Science in Information Technology and MBA in Cybersecurity students, or the Chief Information Security Office for Master of Science in Information Assurance and Cybersecurity and Master of Science in Cybersecurity students.In this assignment, complete the first stage of our Business Continuity Plan (BCP) by developing the primary outline for a BCP to identify key aspects of the organization.It is important to remember that according to the definition provided in ISO 32302, a BCP is “documented procedures that guide organizations to respond, recover, resume, and restore to a pre-defined level of operation following disruption.”Review the topic Resources associated with ISO 27001 and NIST SP 800-53 and conduct your own research about each to prepare for this assignment.Reference the “FEMA Small Business Continuity Plan Template” and “Risk Assessment Matrix” located in the topic Resources to complete the assignment. The FEMA template can be used but copying and pasting any section of the document for the assignment constitutes plagiarism and will be treated as such. Use your own words when filling out each section of the BCP.Develop the Phase 1 content for your company’s BCP. Phase 1 should include all the following:Executive Overview: Be precise and detailed and provide a detailed understanding of the program.Document Change Control: Chart should be completed.Introduction: Include the Overview, Plan Scope, and Applicability that evaluates the appropriateness of cybersecurity frameworks for developing a cybersecurity program to align with business needs, Plan Objectives, and Plan Assumptions.Risk Assessment Matrix Template: Complete the “Risk Assessment Matrix Template” provided as this element is not shown in the sample BCP template.Critical Business Functions Overview: Detail components that are critical to business operations and provide a clear understanding of what the program is designed to address.Company Organizational Chart: Create your own as this is not shown in the sample template. Include the following key positions: CEO, CFO, CIO, CISO, and COO.Submit the BCP including the completed “Risk Assessment Matrix Template” and Company Organizational Chart.Note: Retain a copy of this assignment for the Business Continuity Plan, which will be finalized and submitted in either CYB-690 or ITT-660, depending on your major.Support the BCP with a minimum of three scholarly resources.While APA style is not required for the body of this assignment, solid academic writing is expected, and documentation of sources should be presented using APA formatting guidelines, which can be found in the APA Style Guide, located in the Student Success Center. This assignment uses a rubric. Review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion. You are required to submit this assignment to LopesWrite. A link to the LopesWrite technical support articles is located in Class Resources if you need assistance.This benchmark assignment assesses the following programmatic competencies: MBA Cybersecurity5.2: Evaluate the appropriateness of cybersecurity frameworks for developing a cybersecurity program to align with business needs.MS Information Assurance & Cybersecurity2.1: Evaluate the appropriateness of cybersecurity frameworks for developing a cybersecurity program to align with business needs.
Similar Content
San Diego State University Computer Science Essay
Write an essay of at least 500 words discussing the database disaster recovery program at your place of work.
Includ...
SFU Computer Ethics Proactively Monitoring Modernized Applications Discussion
part one :
Read the attached article and answer the questions:
How ThousandEyes is Advancing Internet Monitoring
htt...
The benefits of the cloud, computer science homework help
The benefits of the cloud have been touted especially for hosting common applications. However there are applications that...
TU Non Contact Smart Thermometer Research Methods & Project Design Report
i am providing you my whole project this is MN691 but the implementation of this project i will do in next semester MN692 ...
CIS 524 SU Direct Manipulation Human Computer Interaction System Discussion Paper
Early computer systems relied on command-line interfaces to perform all actions. Today, the majority of systems use direct...
TAMU History of Circuit City and The Collapse of 2009 Essay
Project Documentation:
History of Circuit City
What were the issues and challenges that caused the collapse of Circui...
Computer Sci Dq 1
Question: Provide one (1) example of a variable name that is acceptable to the compiler but is not recommended according ...
Pen Attack And Cyber Terrorism 11
Cyber terrorism is the use of the internet to carry out acts that are politically motivated with the aim of causing disrup...
Information Disclosure
...
Related Tags
Book Guides
Get 24/7
Homework help
Our tutors provide high quality explanations & answers.
Post question
Most Popular Content
CIS 510 Leeds Metropolitan University Information Gathering Techniques Report
Create a report for your Manager on Information-Gathering Techniques.Gathering information for a new system is important a ...
CIS 510 Leeds Metropolitan University Information Gathering Techniques Report
Create a report for your Manager on Information-Gathering Techniques.Gathering information for a new system is important and sets the tone of the development cycle. If not done thoroughly, the project could be a failure before it begins.You are the Project Manager of XYZ Enterprises. Your manager gives you the task of researching the different techniques used to gather information as the company is going to replace their Case Management System. He would like a report of all the different type of information gathering listed below. For each technique, give reasons to use it and the best ways to accomplish using each information-gathering method.Interviewing individuals and stakeholders.Distributing and collecting questionnaires.Observing and documenting business procedures.Collecting active individuals comments and suggestions.Researching vendor solutions.This course requires the use of Strayer Writing Standards. For assistance and information, please refer to the Strayer Writing Standards link in the left-hand menu of your course.The specific course learning outcome associated with this assignment is:Research the techniques used to collect and gather information for the design of a new system.ASSIGNMENT CLARIFICATIONWeek 2 Assignment 1 is due this week it is worth 100 points or 10% of your overall grade in the class. SO READ THIS TO GET A PERFECT GRADE ON THIS ASSIGNMENT. The grading criteria are as follows as per the rubric.I do not want to read your paper multiple times to pull out the gradable material. I also do not have page amounts. Answer each of the different information gathering techniques fully. If it is not fully answered I will deduct. Just make the HEADERS of the paper sections numbered 1-5 (taken from the grading rubric) and answer each question in order. Make a reference section at the end in the proper format for the minimum 3 references. 1. Researched: Gave reasons for use and best practices using: Interviewing individuals and Stakeholders (17 Points)2. Researched: Give reasons for use and best practices using distribution and collecting questionnaires. (17 Points)3. Researched: Give reasons for use and best practices using observing and documenting business procedures. (17 Points)4. Researched: Give reasons for use and best practices using collecting active individuals comments and suggestions. (17 Points)5. Researched: Give reasons for use and best practices using researching vendor solutions. (17 Points)6. Use at least 3 Quality Resources. (5 Points) 7. Clarity and writing mechanics. (10 Points)individuals
14 pages
Project 4 Human Resource Insider Threat Guidelines
With the evolving and dynamic workplace, insider threats are common issues organizations face when employees develop malic ...
Project 4 Human Resource Insider Threat Guidelines
With the evolving and dynamic workplace, insider threats are common issues organizations face when employees develop malicious intentions towards ...
Read the case PDF and Describe controls that should be applied to either of LAN-to-WAN or WAN domains. Include applicable tools and procedures.
Requirements:3 pages in length (excluding abstract, cover page, and reference list)At least 3 cited sourcesPlease make sur ...
Read the case PDF and Describe controls that should be applied to either of LAN-to-WAN or WAN domains. Include applicable tools and procedures.
Requirements:3 pages in length (excluding abstract, cover page, and reference list)At least 3 cited sourcesPlease make sure to credit all of your sources; no plagiarism! If you fail to credit your sources, you will get no points and no chance to redoAPA format
GCU Risk Assessment Matrix Template Worksheet
Planning is a quintessential bedrock of any program in the professional world. IT and cybersecurity are no different in th ...
GCU Risk Assessment Matrix Template Worksheet
Planning is a quintessential bedrock of any program in the professional world. IT and cybersecurity are no different in this foundation. We plan for the worst and hope for the best.For College of Science, Engineering and Technology students enrolled in the course, this assignment will be Phase 1 in the creation of your "Programmatic Business Continuity Plan Project” that will be completed in stages throughout your programmatic courses. The project will be finalized and submitted in CYB-690 or ITT-660, depending on your major. Review “Business Continuity Plan (BCP)” and the topic Resources for details about the project.As you begin the project, it is important to select an industry that is of interest to you. You may select virtually any industry including retail, education, telecommunications, health care, finance, etc. Create a fictional business within this industry to be the basis for your project. As you develop your project, imagine yourself in the role of the Chief Intelligence Officer for Master of Science in Information Technology and MBA in Cybersecurity students, or the Chief Information Security Office for Master of Science in Information Assurance and Cybersecurity and Master of Science in Cybersecurity students.In this assignment, complete the first stage of our Business Continuity Plan (BCP) by developing the primary outline for a BCP to identify key aspects of the organization.It is important to remember that according to the definition provided in ISO 32302, a BCP is “documented procedures that guide organizations to respond, recover, resume, and restore to a pre-defined level of operation following disruption.”Review the topic Resources associated with ISO 27001 and NIST SP 800-53 and conduct your own research about each to prepare for this assignment.Reference the “FEMA Small Business Continuity Plan Template” and “Risk Assessment Matrix” located in the topic Resources to complete the assignment. The FEMA template can be used but copying and pasting any section of the document for the assignment constitutes plagiarism and will be treated as such. Use your own words when filling out each section of the BCP.Develop the Phase 1 content for your company’s BCP. Phase 1 should include all the following:Executive Overview: Be precise and detailed and provide a detailed understanding of the program.Document Change Control: Chart should be completed.Introduction: Include the Overview, Plan Scope, and Applicability that evaluates the appropriateness of cybersecurity frameworks for developing a cybersecurity program to align with business needs, Plan Objectives, and Plan Assumptions.Risk Assessment Matrix Template: Complete the “Risk Assessment Matrix Template” provided as this element is not shown in the sample BCP template.Critical Business Functions Overview: Detail components that are critical to business operations and provide a clear understanding of what the program is designed to address.Company Organizational Chart: Create your own as this is not shown in the sample template. Include the following key positions: CEO, CFO, CIO, CISO, and COO.Submit the BCP including the completed “Risk Assessment Matrix Template” and Company Organizational Chart.Note: Retain a copy of this assignment for the Business Continuity Plan, which will be finalized and submitted in either CYB-690 or ITT-660, depending on your major.Support the BCP with a minimum of three scholarly resources.While APA style is not required for the body of this assignment, solid academic writing is expected, and documentation of sources should be presented using APA formatting guidelines, which can be found in the APA Style Guide, located in the Student Success Center. This assignment uses a rubric. Review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion. You are required to submit this assignment to LopesWrite. A link to the LopesWrite technical support articles is located in Class Resources if you need assistance.This benchmark assignment assesses the following programmatic competencies: MBA Cybersecurity5.2: Evaluate the appropriateness of cybersecurity frameworks for developing a cybersecurity program to align with business needs.MS Information Assurance & Cybersecurity2.1: Evaluate the appropriateness of cybersecurity frameworks for developing a cybersecurity program to align with business needs.
Earn money selling
your Study Documents