Description
- Describe and explain 3 key components of a Telecommunications/Technology Plan (250 words – approximately 3 well-structured paragraphs and at least one external reference).
2. Explain the advantage and disadvantages of using 802.11g for wireless access and usage in an office environment (250 words – approximately 3 well-structured paragraphs and at least one external reference). Please address these areas:
- Advantages
- Disadvantages
- Limitations
- Strengths
3. This paper should be 2-3 pages of content not counting title page, reference page or appendices (diagrams, budget sheet, equipment list, etc.). Please use APA formatting and cite the sources you use to support and strengthen your presentation.
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.
Explanation & Answer
Review
Review
Anonymous
Super useful! Studypool never disappoints.
Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4
24/7 Homework Help
Stuck on a homework question? Our verified tutors can answer all questions, from basic math to advanced rocket science!
Most Popular Content
Southern New Hampshire Network Config Model Using Microsoft Visio Discussion
OverviewUnderstanding basic network terminology and the rationale for specific network configurations is a key skill for s ...
Southern New Hampshire Network Config Model Using Microsoft Visio Discussion
OverviewUnderstanding basic network terminology and the rationale for specific network configurations is a key skill for succeeding in the information technology field. In this activity, you will demonstrate your understanding of both network terminology and systems mapping to create a home network diagram and define common networking terms.PromptTo demonstrate your understanding of these concepts, address the following:Define the following IT concepts, and describe their role and importance within a network:IP address and DNSServer and clientVPNFirewallsLANs and WANsRead the following scenario and create a network configuration diagram in Microsoft Visio using either the Basic Network Diagram or Detailed Network Diagram symbol sets:Georgia Springer runs a small accounting firm with two partners and a secretary. Each employee has a personal workstation. Client information is stored on a central server shared between all workstations in the office. There is a single networked device that functions as a copier, printer, fax machine, and scanner. The office’s network has a firewall and connects to the internet through a cable modem.Compose a brief 100- to 200-word summary of the network configuration you modeled in Visio, including a description of the network configurations you would recommend. In your summary, use the vocabulary discussed in the first part of this assignment and describe how these components work together within the context of a network.Guidelines for SubmissionYour submission must include:A bulleted list that defines the identified key terms and concepts for network configurations.A model of a networked system using Microsoft Visio.Note: You may use either the Basic Network Diagram or Detailed Network Diagram symbol sets.A brief one- to two-paragraph summary of the home network configuration following your updates.please see RUBRIC attached
Computer Science Discussion
Select from the following lists a total of FOUR topics and discuss.
Define scalability.
List five to ten potent ...
Computer Science Discussion
Select from the following lists a total of FOUR topics and discuss.
Define scalability.
List five to ten potential relationships that align with the Pareto principle, such as how 80 percent of sales come from 20 percent of customers.
Compare and contrast vertical and horizontal scaling.
Explain the importance of the database read/write ratio.
Assume a site guarantees 99.99 percent uptime. How many minutes per year can the site be down?
List and describe five ways you think the cloud will change the future of TV.
List and describe five potential uses for intelligent fabric.
List and describe five ways the cloud will influence the mobile application market, or vice versa.
Discuss the importance of HTML 5.
Discuss how the cloud will impact future operating systems.
List and describe three potential location-aware applications.
List and describe five ways intelligent devices may work together.
Project building help!
OverviewThis week you will continue to work on the 3D scene you already began
to build, based on a 2D image you previous ...
Project building help!
OverviewThis week you will continue to work on the 3D scene you already began
to build, based on a 2D image you previously selected. At this point
you should already have one complex object, a plane to orient the 3D
world, and camera navigation applied to the scene. Now it is time to
incorporate texture to create more detail and realism so the objects in
your scene will start to look more like their real-life counterparts.PromptYou will complete your work in Visual Studio, being sure to work from
the project file you already began to create in prior milestones. This
file has the libraries set up correctly and contains the 3D objects you
built, which will be necessary for you to add to this week.Specifically, you must address the following rubric criteria:Apply texture to create a detailed appearance for a 3D object.
Select the complex object in your scene (the one that uses two or more
shapes to create a single object) and determine what image files you
should use to render it in 3D. You may wish to approach this
realistically or take some artistic license to create something more
creative. Refer to the Sourcing Textures Tutorial, linked in this week’s
Resources section, to ensure the textures you select are free and open
source. As you work, manipulate your texture to ensure it is not too
stretched or too small to match the object. Pay particular attention to
the resolution of the image you choose to use so that it does not appear
too pixelated for the object. However, you will also not want the image
to be too large so that it will take a long time to render. Continue to
check your work by running the code and viewing how the texture has
been applied to the object.Apply a complex texturing technique to a 3D shape.
Depending on what makes the most sense for your scene, either tile a
texture or overlap two images on top of one another for one of the
shapes in your complex object. The selected technique should be used to
add detail to your scene in a particularly unique or interesting way.Create a cohesive object using different textures on individual 3D shapes.
Because your 3D object is made of two or more 3D shapes arranged in
relation to one another, you will need to orient the textures in
relation to one another. Think about what different image files you may
want to use in order to emphasize the different components of the object
overall.Create code that follows a logical flow without syntax errors.
The code you create has to be executable and all the code that is
included needs to be reached by the execution. Note that not everything
should be written in a single function and your work should be
well-modularized.Apply coding best practices in your creations. Pay
particular attention to the way you format and comment your code.
Program code should be easy to read and follow industry standard code
formatting practices, such as indentation and spacing. Commenting best
practices should be in place to ensure the source code is briefly and
clearly explained using descriptive comments.Guidelines for SubmissionSubmit a completed ZIP folder with all of your code, which may
include one or multiple CPP files along with Visual Studio project
files. Also make sure the ZIP folder includes an EXE file, because
without this your code will not be able to run. Checking for the EXE can
be used as a quick reference on the functionality of your code before
you submit.
ITS 4011 College of Saint Benedict Scope Planning and Scope Creeping Discussion
Part A
Work Breakdown Structure (WBS) Based on your understanding of project planning and budgeting, express your views on ...
ITS 4011 College of Saint Benedict Scope Planning and Scope Creeping Discussion
Part A
Work Breakdown Structure (WBS) Based on your understanding of project planning and budgeting, express your views on the following:
What is scope planning and scope creeping?
What are some of the ways to avoid problems and manage scope correctly?
You've been assigned the project of setting up a LAN with a broadband connection in your office. You need to provide internet connectivity for web browsing to all users. All the computers have Microsoft Windows 7 software installed.
Based on your understanding of different aspects of project management, address the following:
Develop a WBS based on the details provided below:
Network design
Networking hardware setup
Broadband router
Network cards
Network cabling
Servers
Networking software
Server operating system
Proxy server software
System configuration
Testing
Training
In a Microsoft Word document, create a detailed report describing the scope and WBS of this project.
Part B
Applying the Concepts of Project Scheduling and Budgeting This assignment is in continuation to the project discussed in Submissions Area assignment in Week 2.
In this week, you have to focus on the project scheduling and budgeting aspects of the selected project on developing a corporate website. Based on your understanding of project scheduling and budgeting, address the following:
Create the project schedule using ProjectLibre. Use the start date of the course for the first day of the project. The trial run of the software should be at least two weeks before the actual installation.
Create a budget sheet for the project in Microsoft Excel. This budget sheet should include the following:
Material procurement, including hardware and software.
Total person effort (depicting the people in different phases and their efforts).
Installation charges
Maintenance charges (annual).
Unit 2 individual project for ITCO211
Assignment DescriptionClick here to refer to the instructions for the unit 2 lab tasks.You are Sam Smith, a new IT technic ...
Unit 2 individual project for ITCO211
Assignment DescriptionClick here to refer to the instructions for the unit 2 lab tasks.You are Sam Smith, a new IT technician at Global Packaging. You have been provided with your first assignment to connect a personal computer (PC) to an Ethernet network and a fiber-optic network. You will be involved in the development and implementation of their wide area network (WAN) project.Provide a Word document of 3-4 pages that addresses the following:A brief description in your own words of the necessary actions to connect systems to a network using wired media.A summary of the characteristics that make fiber-optic cabling different from other forms of cabling.A scenario whereby fiber-optic cabling would be appropriate for a client. Support your position with relevant research.A functional comparison of the different network devices.Details about what is necessary for Internet connectivity.Explain the process to install a network adapter.Primary differences between a wide area network and a local area network.Be sure to reference all of your sources using APA style. Refer to the APA style guide found in the Library for further information.Reminder: Refer to the Small Group area and the ITCO251 Group Project Schedule and work on the tasks that are defined for Unit 2. Contact your instructor with questions via e-mail, the IM feature in the classroom, or during the live chat or office hours.As you collaborate with your team, keep the following in mind. Be sure to meet the team's agreed-to deadlines. Contact your instructor with any questions.Allocate time and resources effectively and coordinate efforts with all affected parties Acknowledge team membership and role Identify the roles of each team member Encourage others to express their ideas and opinions Show sensitivity to the thoughts and opinions of other team members Respond appropriately to positive and negative feedback Identify and draw upon team members' strengths and weaknesses to achieve results Learn from other team members Establish productive relationships Develop constructive and cooperative working relationships with others Use a group approach to identify problems and develop solutions based on group consensus
IFSM300 UMBC Stage 1 Case Study on Maryland Technology Consultants Essay
IFSM 300 Stage 1 Assignment Stage 1:Strategic Use of Technology Before you begin work on this assignment, be sure ...
IFSM300 UMBC Stage 1 Case Study on Maryland Technology Consultants Essay
IFSM 300 Stage 1 Assignment Stage 1:Strategic Use of Technology Before you begin work on this assignment, be sure you have read the Case Study on Maryland Technology Consultants (MTC) attached below.MTC is a fictional company created for IFSM 300’s Case Study.It is also recommended that you review the additional Stages (2, 3 and 4) as well as the vendor brochure provided for Stage 4.This will help you understand the overall report and potential solution. Overview As a business analyst in the Chief Information Officer’s (CIO's) department of Maryland Technology Consulting (MTC), you have been assigned to conduct an analysis, develop a set of system requirements, evaluate a proposed solution, and develop an implementation plan for an IT solution (applicant tracking or hiring system) to improve the hiring process for MTC.This work will be completed in four stages, and each of these four stages will focus on one section of an overall Business Analysis and System Recommendation (BA&SR) report to be delivered to the CIO. Section I. Strategic Use of Technology (Stage 1) - The first step is to look at the organization and explain how an IT system could be used to support MTC's strategies and objectives and support its decision-making processes. Section II. Process Analysis (Stage 2) – Next you will evaluate current processes and workflow and explain how MTC can use IT to improve its processes and workflow. Section III. Requirements (Stage 3) –Then you will identify key stakeholder expectations for the new technology solution to support MTC’s hiring process and develop a set of requirements. Section IV. System Recommendation (Stage 4) – Finally, you will review the provided Vendor brochure for a proposed applicant tracking system and explain how it meets the requirements and what needs to be done to implement the system within MTC. The sections of the BA&SR will be developed and submitted as four staged assignments.In stages 2, 3 and 4, you should review any feedback from previous assignments to help improve the effectiveness of your overall report and then add the new section to your report. At the end of the course, you will submit a complete BA&SR document that includes all four sections.Part of the grading criteria for Stage 4 submission includes evaluating if the document is a very effective and cohesive assemblage of the four sections, is well formatted and flows smoothly from one section to the next. Assignment – BA&SR: Introduction and Section I. Strategic Use of Technology Write an appropriate Introduction to the entire BA&SR Report (guidelines are provided below).Section I of the BA&SR document contains an organizational analysis and identifies ways in which an information system to improve the hiring process can help MTC, the organization in the case study, meet its strategic goals and meet the information needs of various levels of management. Using the case study, assignment instructions, Content readings, and external research, develop your Introduction and Section I. Strategic Use of Technology.To start, review the readings in Weeks 1 and 2.The case study tells you that the executives and employees at MTC have identified a need for an effective and efficient applicant tracking or hiring system.As you review the case study, use the assignment instructions to take notes to assist in your analysis. Use the outline format, headings and tables provided and follow all formatting instructions below.For Stage 1, create a title page and reference page that will be used for all 4 stages. Apply specific information from the case study to address each area. Introduction Begin your report with a clear, concise, well organized introduction to explain why you are writing and what is to come in the complete BA&SR report (not just Stage 1).This should briefly set the context for MTC – business purpose, environment, and current challenges related to hiring.Then specifically provide what is to come in the full report.Keep your audience in mind – this is an internal report for the CIO of MTC.Provide an introduction in one paragraph that engages the reader’s interest in continuing to read your report. I.Strategic Use of Technology Business Strategy – In this section, you should clearly present – at a broad level – what MTC’s business strategy is (refer to case study information), then what issues the current manual hiring process may present that interfere with achieving that strategy, and how improving the hiring process will benefit MTC and support its business strategy.(Use two to three strong sentences that explain how the system would support the strategy and justify your position with specifics from the Case Study.) Competitive Advantage - First, provide an overview of the competitive environment that MTC is currently operating in based on information from the case study. Then explain how and why MTC can use the new hiring system to increase its competitive advantage and help achieve its overall business strategy.Your explanation should demonstrate your understanding of what competitive advantage is as well as how improving the hiring process will help achieve MTC’s competitive advantage. Include how MTC can use the type of data or information that will be in the hiring system to improve its competitive advantage.(Paragraph of 4-5 sentences)Strategic Objectives- Review the four Strategic Goals presented in the Strategic Business Plan section of the MTC Case Study.The CIO has asked you to come up with an example of an objective to help meet each goal and explain how a new hiring system would help achieve that objective.As you can see from the example provided in the table below, an objective is a statement that is clear (not vague) and is something that can be measured or evaluated to determine whether it has been met or not. An important part of setting objectives is that they are SMART (specific, measurable, achievable, relevant and time-bound).In order to evaluate whether an objective has been achieved, it’s important to be able to measure it.Consider this difference – Student wants to get a degree (non-specific and not measurable) vs.Student wants to earn a degree in Information Systems Management by May 2020.(This objective provides specific what and when.)First, insert an introductory opening sentence for this table.Then, for each of the rows listed below, complete the table with the requested information.(Provide an introductory sentence and copy the table.Create an Objective for each of the 3 remaining Goals and explain using 2-3 complete sentences for each.)Note:This is not about an objective to implement a hiring system or broad business goals but rather the focus is on objectives that would be supported by the use of a technology solution to support/improve the hiring process.
Similar Content
Arkansas Northeastern College Picoblaze Architecture Questions
4. (5 pts.) FPGAS
a. What does FPGA stand for?
b. Draw the basic architecture of a simple FPGA. Identify each type of reso...
Santa List Java Programming Code Project
Write java program called Santa list. This list will print out all children that he needs to deliver toys
to this years. A...
AACAS Location of Transfer Affect Travelers and Their Choice of Travel Mode Discussion
sensors
Viewpoint
Can Building “Artificially Intelligent Cities”
Safeguard Humanity from Natural Disasters,
Pandemics...
University of South Florida Databases Tableau Analysis
Download the project data file (Tableau 2 Data S21.xlsx) and the instructions i attached below.One good way to start is to...
NU Solutions to Aid User Defenses and Reduce Evolving Information Risks Essay
For this assignment, you must write an academic paper that recommends ways to i...
Strayer University Information Visualization Discussion
Respond to the following in a 3-4 paragraph:From the research you did about information visualization, identify the
tool...
File Classification ...abc..
Data classification is the data organization process in various categories purposely for its most efficient and effective ...
Computer Assignment
Popup windows are a prominent "phishing" technique. Hostile sites can apply pop-ups to induce users that an essential mess...
Project Green Sw
Green software engineering is an emerging technology in the field of engineering during this 21st century. For many decade...
Related Tags
Book Guides
The Bell Jar
by Sylvia Plath
Bridge to Terabithia
by Katherine Paterson
The Turn of the Screw
by Henry James
Little Fires Everywhere
by Celeste Ng
And Then There Were None
by Agatha Christie
Beowulf
by Anonymous Anglo-Saxon poet
How to Win Friends and Influence People
by Dale Carnegie
Anthem
by Ayn Rand
Get 24/7
Homework help
Our tutors provide high quality explanations & answers.
Post question
Most Popular Content
Southern New Hampshire Network Config Model Using Microsoft Visio Discussion
OverviewUnderstanding basic network terminology and the rationale for specific network configurations is a key skill for s ...
Southern New Hampshire Network Config Model Using Microsoft Visio Discussion
OverviewUnderstanding basic network terminology and the rationale for specific network configurations is a key skill for succeeding in the information technology field. In this activity, you will demonstrate your understanding of both network terminology and systems mapping to create a home network diagram and define common networking terms.PromptTo demonstrate your understanding of these concepts, address the following:Define the following IT concepts, and describe their role and importance within a network:IP address and DNSServer and clientVPNFirewallsLANs and WANsRead the following scenario and create a network configuration diagram in Microsoft Visio using either the Basic Network Diagram or Detailed Network Diagram symbol sets:Georgia Springer runs a small accounting firm with two partners and a secretary. Each employee has a personal workstation. Client information is stored on a central server shared between all workstations in the office. There is a single networked device that functions as a copier, printer, fax machine, and scanner. The office’s network has a firewall and connects to the internet through a cable modem.Compose a brief 100- to 200-word summary of the network configuration you modeled in Visio, including a description of the network configurations you would recommend. In your summary, use the vocabulary discussed in the first part of this assignment and describe how these components work together within the context of a network.Guidelines for SubmissionYour submission must include:A bulleted list that defines the identified key terms and concepts for network configurations.A model of a networked system using Microsoft Visio.Note: You may use either the Basic Network Diagram or Detailed Network Diagram symbol sets.A brief one- to two-paragraph summary of the home network configuration following your updates.please see RUBRIC attached
Computer Science Discussion
Select from the following lists a total of FOUR topics and discuss.
Define scalability.
List five to ten potent ...
Computer Science Discussion
Select from the following lists a total of FOUR topics and discuss.
Define scalability.
List five to ten potential relationships that align with the Pareto principle, such as how 80 percent of sales come from 20 percent of customers.
Compare and contrast vertical and horizontal scaling.
Explain the importance of the database read/write ratio.
Assume a site guarantees 99.99 percent uptime. How many minutes per year can the site be down?
List and describe five ways you think the cloud will change the future of TV.
List and describe five potential uses for intelligent fabric.
List and describe five ways the cloud will influence the mobile application market, or vice versa.
Discuss the importance of HTML 5.
Discuss how the cloud will impact future operating systems.
List and describe three potential location-aware applications.
List and describe five ways intelligent devices may work together.
Project building help!
OverviewThis week you will continue to work on the 3D scene you already began
to build, based on a 2D image you previous ...
Project building help!
OverviewThis week you will continue to work on the 3D scene you already began
to build, based on a 2D image you previously selected. At this point
you should already have one complex object, a plane to orient the 3D
world, and camera navigation applied to the scene. Now it is time to
incorporate texture to create more detail and realism so the objects in
your scene will start to look more like their real-life counterparts.PromptYou will complete your work in Visual Studio, being sure to work from
the project file you already began to create in prior milestones. This
file has the libraries set up correctly and contains the 3D objects you
built, which will be necessary for you to add to this week.Specifically, you must address the following rubric criteria:Apply texture to create a detailed appearance for a 3D object.
Select the complex object in your scene (the one that uses two or more
shapes to create a single object) and determine what image files you
should use to render it in 3D. You may wish to approach this
realistically or take some artistic license to create something more
creative. Refer to the Sourcing Textures Tutorial, linked in this week’s
Resources section, to ensure the textures you select are free and open
source. As you work, manipulate your texture to ensure it is not too
stretched or too small to match the object. Pay particular attention to
the resolution of the image you choose to use so that it does not appear
too pixelated for the object. However, you will also not want the image
to be too large so that it will take a long time to render. Continue to
check your work by running the code and viewing how the texture has
been applied to the object.Apply a complex texturing technique to a 3D shape.
Depending on what makes the most sense for your scene, either tile a
texture or overlap two images on top of one another for one of the
shapes in your complex object. The selected technique should be used to
add detail to your scene in a particularly unique or interesting way.Create a cohesive object using different textures on individual 3D shapes.
Because your 3D object is made of two or more 3D shapes arranged in
relation to one another, you will need to orient the textures in
relation to one another. Think about what different image files you may
want to use in order to emphasize the different components of the object
overall.Create code that follows a logical flow without syntax errors.
The code you create has to be executable and all the code that is
included needs to be reached by the execution. Note that not everything
should be written in a single function and your work should be
well-modularized.Apply coding best practices in your creations. Pay
particular attention to the way you format and comment your code.
Program code should be easy to read and follow industry standard code
formatting practices, such as indentation and spacing. Commenting best
practices should be in place to ensure the source code is briefly and
clearly explained using descriptive comments.Guidelines for SubmissionSubmit a completed ZIP folder with all of your code, which may
include one or multiple CPP files along with Visual Studio project
files. Also make sure the ZIP folder includes an EXE file, because
without this your code will not be able to run. Checking for the EXE can
be used as a quick reference on the functionality of your code before
you submit.
ITS 4011 College of Saint Benedict Scope Planning and Scope Creeping Discussion
Part A
Work Breakdown Structure (WBS) Based on your understanding of project planning and budgeting, express your views on ...
ITS 4011 College of Saint Benedict Scope Planning and Scope Creeping Discussion
Part A
Work Breakdown Structure (WBS) Based on your understanding of project planning and budgeting, express your views on the following:
What is scope planning and scope creeping?
What are some of the ways to avoid problems and manage scope correctly?
You've been assigned the project of setting up a LAN with a broadband connection in your office. You need to provide internet connectivity for web browsing to all users. All the computers have Microsoft Windows 7 software installed.
Based on your understanding of different aspects of project management, address the following:
Develop a WBS based on the details provided below:
Network design
Networking hardware setup
Broadband router
Network cards
Network cabling
Servers
Networking software
Server operating system
Proxy server software
System configuration
Testing
Training
In a Microsoft Word document, create a detailed report describing the scope and WBS of this project.
Part B
Applying the Concepts of Project Scheduling and Budgeting This assignment is in continuation to the project discussed in Submissions Area assignment in Week 2.
In this week, you have to focus on the project scheduling and budgeting aspects of the selected project on developing a corporate website. Based on your understanding of project scheduling and budgeting, address the following:
Create the project schedule using ProjectLibre. Use the start date of the course for the first day of the project. The trial run of the software should be at least two weeks before the actual installation.
Create a budget sheet for the project in Microsoft Excel. This budget sheet should include the following:
Material procurement, including hardware and software.
Total person effort (depicting the people in different phases and their efforts).
Installation charges
Maintenance charges (annual).
Unit 2 individual project for ITCO211
Assignment DescriptionClick here to refer to the instructions for the unit 2 lab tasks.You are Sam Smith, a new IT technic ...
Unit 2 individual project for ITCO211
Assignment DescriptionClick here to refer to the instructions for the unit 2 lab tasks.You are Sam Smith, a new IT technician at Global Packaging. You have been provided with your first assignment to connect a personal computer (PC) to an Ethernet network and a fiber-optic network. You will be involved in the development and implementation of their wide area network (WAN) project.Provide a Word document of 3-4 pages that addresses the following:A brief description in your own words of the necessary actions to connect systems to a network using wired media.A summary of the characteristics that make fiber-optic cabling different from other forms of cabling.A scenario whereby fiber-optic cabling would be appropriate for a client. Support your position with relevant research.A functional comparison of the different network devices.Details about what is necessary for Internet connectivity.Explain the process to install a network adapter.Primary differences between a wide area network and a local area network.Be sure to reference all of your sources using APA style. Refer to the APA style guide found in the Library for further information.Reminder: Refer to the Small Group area and the ITCO251 Group Project Schedule and work on the tasks that are defined for Unit 2. Contact your instructor with questions via e-mail, the IM feature in the classroom, or during the live chat or office hours.As you collaborate with your team, keep the following in mind. Be sure to meet the team's agreed-to deadlines. Contact your instructor with any questions.Allocate time and resources effectively and coordinate efforts with all affected parties Acknowledge team membership and role Identify the roles of each team member Encourage others to express their ideas and opinions Show sensitivity to the thoughts and opinions of other team members Respond appropriately to positive and negative feedback Identify and draw upon team members' strengths and weaknesses to achieve results Learn from other team members Establish productive relationships Develop constructive and cooperative working relationships with others Use a group approach to identify problems and develop solutions based on group consensus
IFSM300 UMBC Stage 1 Case Study on Maryland Technology Consultants Essay
IFSM 300 Stage 1 Assignment Stage 1:Strategic Use of Technology Before you begin work on this assignment, be sure ...
IFSM300 UMBC Stage 1 Case Study on Maryland Technology Consultants Essay
IFSM 300 Stage 1 Assignment Stage 1:Strategic Use of Technology Before you begin work on this assignment, be sure you have read the Case Study on Maryland Technology Consultants (MTC) attached below.MTC is a fictional company created for IFSM 300’s Case Study.It is also recommended that you review the additional Stages (2, 3 and 4) as well as the vendor brochure provided for Stage 4.This will help you understand the overall report and potential solution. Overview As a business analyst in the Chief Information Officer’s (CIO's) department of Maryland Technology Consulting (MTC), you have been assigned to conduct an analysis, develop a set of system requirements, evaluate a proposed solution, and develop an implementation plan for an IT solution (applicant tracking or hiring system) to improve the hiring process for MTC.This work will be completed in four stages, and each of these four stages will focus on one section of an overall Business Analysis and System Recommendation (BA&SR) report to be delivered to the CIO. Section I. Strategic Use of Technology (Stage 1) - The first step is to look at the organization and explain how an IT system could be used to support MTC's strategies and objectives and support its decision-making processes. Section II. Process Analysis (Stage 2) – Next you will evaluate current processes and workflow and explain how MTC can use IT to improve its processes and workflow. Section III. Requirements (Stage 3) –Then you will identify key stakeholder expectations for the new technology solution to support MTC’s hiring process and develop a set of requirements. Section IV. System Recommendation (Stage 4) – Finally, you will review the provided Vendor brochure for a proposed applicant tracking system and explain how it meets the requirements and what needs to be done to implement the system within MTC. The sections of the BA&SR will be developed and submitted as four staged assignments.In stages 2, 3 and 4, you should review any feedback from previous assignments to help improve the effectiveness of your overall report and then add the new section to your report. At the end of the course, you will submit a complete BA&SR document that includes all four sections.Part of the grading criteria for Stage 4 submission includes evaluating if the document is a very effective and cohesive assemblage of the four sections, is well formatted and flows smoothly from one section to the next. Assignment – BA&SR: Introduction and Section I. Strategic Use of Technology Write an appropriate Introduction to the entire BA&SR Report (guidelines are provided below).Section I of the BA&SR document contains an organizational analysis and identifies ways in which an information system to improve the hiring process can help MTC, the organization in the case study, meet its strategic goals and meet the information needs of various levels of management. Using the case study, assignment instructions, Content readings, and external research, develop your Introduction and Section I. Strategic Use of Technology.To start, review the readings in Weeks 1 and 2.The case study tells you that the executives and employees at MTC have identified a need for an effective and efficient applicant tracking or hiring system.As you review the case study, use the assignment instructions to take notes to assist in your analysis. Use the outline format, headings and tables provided and follow all formatting instructions below.For Stage 1, create a title page and reference page that will be used for all 4 stages. Apply specific information from the case study to address each area. Introduction Begin your report with a clear, concise, well organized introduction to explain why you are writing and what is to come in the complete BA&SR report (not just Stage 1).This should briefly set the context for MTC – business purpose, environment, and current challenges related to hiring.Then specifically provide what is to come in the full report.Keep your audience in mind – this is an internal report for the CIO of MTC.Provide an introduction in one paragraph that engages the reader’s interest in continuing to read your report. I.Strategic Use of Technology Business Strategy – In this section, you should clearly present – at a broad level – what MTC’s business strategy is (refer to case study information), then what issues the current manual hiring process may present that interfere with achieving that strategy, and how improving the hiring process will benefit MTC and support its business strategy.(Use two to three strong sentences that explain how the system would support the strategy and justify your position with specifics from the Case Study.) Competitive Advantage - First, provide an overview of the competitive environment that MTC is currently operating in based on information from the case study. Then explain how and why MTC can use the new hiring system to increase its competitive advantage and help achieve its overall business strategy.Your explanation should demonstrate your understanding of what competitive advantage is as well as how improving the hiring process will help achieve MTC’s competitive advantage. Include how MTC can use the type of data or information that will be in the hiring system to improve its competitive advantage.(Paragraph of 4-5 sentences)Strategic Objectives- Review the four Strategic Goals presented in the Strategic Business Plan section of the MTC Case Study.The CIO has asked you to come up with an example of an objective to help meet each goal and explain how a new hiring system would help achieve that objective.As you can see from the example provided in the table below, an objective is a statement that is clear (not vague) and is something that can be measured or evaluated to determine whether it has been met or not. An important part of setting objectives is that they are SMART (specific, measurable, achievable, relevant and time-bound).In order to evaluate whether an objective has been achieved, it’s important to be able to measure it.Consider this difference – Student wants to get a degree (non-specific and not measurable) vs.Student wants to earn a degree in Information Systems Management by May 2020.(This objective provides specific what and when.)First, insert an introductory opening sentence for this table.Then, for each of the rows listed below, complete the table with the requested information.(Provide an introductory sentence and copy the table.Create an Objective for each of the 3 remaining Goals and explain using 2-3 complete sentences for each.)Note:This is not about an objective to implement a hiring system or broad business goals but rather the focus is on objectives that would be supported by the use of a technology solution to support/improve the hiring process.
Earn money selling
your Study Documents