microprossessing 2

Price: $20 USD

Question description

1. Write a program to get eight-bit data from PORTA and send it to PORTB and PORTC. Make sure to define each port as input or output. 



2. Write a program to toggle all bits of PORTA continuously by sending $55 and $AA to it. 



3. Write a program to toggle PB3, PB7, and PB5 continuously without disturbing the rest of the bits. Assume that there is a delay procedure that you can call. 



4. Write a program to monitor Bit PJ3, which is connected to a switch. When it is HIGH, send 55H to the output port, PORTB. You also need to define the PJ3 bit as an input port, and PORTB as an output port.      


5. Eight switches are connected to PORTB and eight LEDs are connected to PORTA. We would like to monitor the first two least significant bits of PORTB (use masking technique).  Whenever both of these bits are set, switch all LEDs of Port A on for one second. Assume that the name of the delay subroutine is DELAY. You do not need to write the code for the delay procedure. 

Studypool has helped 1,244,100 students
Ask your homework questions. Receive quality answers!

Type your question here (or upload an image)

1822 tutors are online

Brown University

1271 Tutors

California Institute of Technology

2131 Tutors

Carnegie Mellon University

982 Tutors

Columbia University

1256 Tutors

Dartmouth University

2113 Tutors

Emory University

2279 Tutors

Harvard University

599 Tutors

Massachusetts Institute of Technology

2319 Tutors

New York University

1645 Tutors

Notre Dam University

1911 Tutors

Oklahoma University

2122 Tutors

Pennsylvania State University

932 Tutors

Princeton University

1211 Tutors

Stanford University

983 Tutors

University of California

1282 Tutors

Oxford University

123 Tutors

Yale University

2325 Tutors