Transportation report

Anonymous
timer Asked: Apr 29th, 2016

Question description

Please I need two reports make it different but in a same location the first report talk about one side of the way and the second report talk about the opposite side of the way. The reports should be different from the other.

This is the instructions that you have to follow in each report : 

HIGHWAY DESIGN GUIDELINES

This is a guideline for your Highway Design Project. Your design must be based on the criteria contained in the Green Book by AASHTO titled: “A Policy on Geometric Design of Highways and Street,” by American Association of State Highway and Transportation Officials, Washington, DC 2001. Your design must show clearly all assumptions, reference pages of the Green Book for the following components of your highway design: 1. Design Hour Volume 2. Design Speed 3. Design Vehicle 4. Cross-Section Elements 5. Alignment Designs-Vertical and Horizontal Curves. The following are the design year for your highway designs: 2068.

TRAFFIC PROJECTIONS You are to obtain historical average daily traffic volumes for 10 years for Route 1-270 from the State Highway Administration (Traffic Operations Division) for your use in determining traffic projections for your design year.

DESIGN LANE CONFIGURATION -(NUMBER OF LANE Lanes: Highway/100 ft median)

DESIGN SPEIFICATIONS Minimum design requirements: 1. Minimum number of curves-3.  2. Profile map   3. Alignment drawings 4. Cross-sections 5. A full project report. (professionally prepared)

PROJECT REPORT GUIDELINES Your professional project report should follow the following format: 1. Title Page 2. Introduction-describing what your project is all about. 3. Selection of Alignment for Design 4. Data Collection-traffic data, accident data or any other relevant information you may have collected relative to your project. 5. Design Standards and assumptions 6. Design Calculations a. Vertical curve design calculations b. Horizontal curve design calculations. c. Stations and Elevations d. Design Drawings 7. Project Costing 8. Recommendations 9. Conclusions


PROJECT ALIGNMENT COORDINATES: (START POINT: 510,000-N  -  712,000-E  ) ( ENDS POINT: 512,000-N  -  720,000-E) 

 

TRAFFIC COUNT LOCATIONS : (PERRING PARKWAY/TAYLOR AVE/PERRING PARKWAY/PUTTY HILL ROAD) Baltimore, Maryland US


The file that attached is a sample report talk about one way in the street, in different location. It can help you to understand more.

Tutor Answer

(Top Tutor) Studypool Tutor
School: Boston College
Studypool has helped 1,244,100 students
flag Report DMCA
Similar Questions
Hot Questions
Related Tags

Brown University





1271 Tutors

California Institute of Technology




2131 Tutors

Carnegie Mellon University




982 Tutors

Columbia University





1256 Tutors

Dartmouth University





2113 Tutors

Emory University





2279 Tutors

Harvard University





599 Tutors

Massachusetts Institute of Technology



2319 Tutors

New York University





1645 Tutors

Notre Dam University





1911 Tutors

Oklahoma University





2122 Tutors

Pennsylvania State University





932 Tutors

Princeton University





1211 Tutors

Stanford University





983 Tutors

University of California





1282 Tutors

Oxford University





123 Tutors

Yale University





2325 Tutors