Materials and Devices Lab

timer Asked: Apr 14th, 2017

Question description

I have done Lab 4 all parts except part 4. Please I need someone to help me with it. I have attached my report for lab 4 for you to check.

PART 4. Simulating Diode Model in ADS

  1. Build the circuit as seen in Figure 2 in ADS. Make sure all the components are retrieved from the ADS library. The Ammeter can be simulated in ADS as a Probe component. The “I_Probe” component is a device that acts as an ammeter, and it can be found in the “Probe Component” library.
  2. To produce the I-V curve with our circuit, we must allow the voltage across the diode, Vd (Refer to Lab #1 on how to name a node), to increment giving a corresponding value for the current through the diode, Id. This can be done by sweeping the input voltage, Vdc from 0 to 10V. The DC simulation component will allow you to sweep this voltage. Refer to Lab #3 (DC Simulation) for instructions on how to sweep DC voltages and how to obtain DC source. Use the same step values for the DC sweep as in Part 2.
  3. Obtain a silicon 1N4007 from the Diode library

Tutor Answer

(Top Tutor) Studypool Tutor
School: Purdue University
Studypool has helped 1,244,100 students
flag Report DMCA
Similar Questions
Hot Questions
Related Tags

Brown University

1271 Tutors

California Institute of Technology

2131 Tutors

Carnegie Mellon University

982 Tutors

Columbia University

1256 Tutors

Dartmouth University

2113 Tutors

Emory University

2279 Tutors

Harvard University

599 Tutors

Massachusetts Institute of Technology

2319 Tutors

New York University

1645 Tutors

Notre Dam University

1911 Tutors

Oklahoma University

2122 Tutors

Pennsylvania State University

932 Tutors

Princeton University

1211 Tutors

Stanford University

983 Tutors

University of California

1282 Tutors

Oxford University

123 Tutors

Yale University

2325 Tutors