Device Control

fn_ef
timer Asked: Apr 19th, 2017

Question Description

1) Construct an equivalent sequence data table for the six steps of the drum‐operated sequencer drawn in Figure 1
2) Answer the following with reference to the sequence file #B3:0 shown in Figure 2.
3) What is the function of the file of a sequencer? What is the function of the mask in the sequencer?
4) When line voltage variations to the PLC power supply are excessive, what can be done to solve the problem?
5) List three potential noise‐generating inductive devices
6) State the basic function of each of the following as part of a process control system:
7) State the purpose of each of the following types of screens associated with HMIs:


Please find attached file






Unformatted Attachment Preview

ENGR 4400 Due: Device Control Spring 2017 4/19/2017 (Wednesday) by 11:59PM on Blackboard 1) Construct an equivalent sequence data table for the six steps of the drum‐operated sequencer drawn in Figure 1. Figure 1 – Drum‐operated sequencer for problem 1 2) Answer the following with reference to the sequence file #B3:0 shown in Figure 2. a) Assume that output bit addresses O:2/0 through O:2/15 are controlling associated output pilot lights PL1 through PL16. State the status of each light for steps 1 through 4 b) Which output bit addresses could be masked and which could not? Why or why not? c) State the status of each bit of output word O:2 for step 3 of the sequence cycle. Output O:2 0 0 0 0 0 B3:0 0 0 0 0 0 B3:1 1 1 0 1 1 B3:2 0 0 1 0 0 B3:3 1 0 1 0 1 B3:4 1 1 1 1 0 Figure 2 – Sequencer file for problem 2 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 0 1 0 0 1 0 0 0 0 0 1 1 1 0 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 0 1 1 0 0 0 1 0 0 0 1 0 1 0 0 1 0 0 0 Start Step 1 Step 2 Step 3 Step 4 3) What is the function of the file of a sequencer? What is the function of the mask in the sequencer? 4) When line voltage variations to the PLC power supply are excessive, what can be done to solve the problem? 5) List three potential noise‐generating inductive devices. 6) State the basic function of each of the following as part of a process control system: a) Sensors b) Human‐machine interface c) Signal condition d) Actuators e) Controller 7) State the purpose of each of the following types of screens associated with HMIs: a) Trend values b) Operational summary c) Alarm summary
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

This question has not been answered.

Create a free account to get help with this and any other question!

Related Tags

Brown University





1271 Tutors

California Institute of Technology




2131 Tutors

Carnegie Mellon University




982 Tutors

Columbia University





1256 Tutors

Dartmouth University





2113 Tutors

Emory University





2279 Tutors

Harvard University





599 Tutors

Massachusetts Institute of Technology



2319 Tutors

New York University





1645 Tutors

Notre Dam University





1911 Tutors

Oklahoma University





2122 Tutors

Pennsylvania State University





932 Tutors

Princeton University





1211 Tutors

Stanford University





983 Tutors

University of California





1282 Tutors

Oxford University





123 Tutors

Yale University





2325 Tutors