Complerte Electrical Engineering Assignment NO PLAGIARISM

User Generated

ubzrjbexpbafhgyvat

Engineering

Description

DONOT BID IF YOU CANNOT ANSWER WITHING THE TIME LIMIT WITHNO COPYING AND PASTING FROM CHEGG OR COURSEHERO!!!NO PALGIARISM AT ALL...SHOW YOUR WORK...please be a MULTISIM AND ELECTRICAL ENGINEERING EXPERT!


1. Design a lowpass FIR fiter for 10KHz sampling, with a pass band edge at

2Hz, a stop band edge at 3Khz, and 20dB stop band attenuation. Find the

impulse response and the difference equation for the filter.

2. A high pass filter with a pass band edge frequency of 5.5kHz must be designed for a 16kHz sampled system. The stop band attenuation must be at least 40dB, and the transition width must be no greater than 3.5kHz. Write the difference equation for the filter.

3. Design a band stop filter according to the following specifications.

Pass band edges at 2kHz and 5kHz

Transition width 1kHz

Stop band attenuation 40dB

4.

Compare the filter shape for the filter described by the transfer function H(z)=.0152+.2263z^-1+.517z^-2+.2263z^-3+.0152z^-4 to the shape obtained after the coefficients are quantized to

a. 5 bits

b. 4 bits

Sampling rate 12kHz

User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.

This question has not been answered.

Create a free account to get help with this and any other question!

Related Tags