Description
In this assignment I need to complete parts A, B, and C. I need to complete journal entries in this. Please help!!!!!
Unformatted Attachment Preview
GRADED PROJECT
Directions: Be sure to make an electronic copy of your answer before submitting
it to Ashworth College for grading. Unless otherwise stated, answer in complete
sentences, and be sure to use correct English spelling and grammar. Sources
must be cited in APA format. Your response should be a minimum of one
(1) single-spaced page to a maximum of two (2) pages in length; refer to the
"Assignment Format" page for specific format requirements.
Part A
(30 points)
Prepare general journal entries to record the following transactions for the Harris
Company. (The company uses the balance sheet approach for recording bad
debts expense.)
2010
Dec. 31
Recorded Bad Debts Expense, $800
2011
Jan. 3
Mar. 4
Jul. 5
Wrote off Jal's account as uncollectible, $60
Wrote off Hall's account as uncollectible, $75
Recovered $45 from Hall
Wrote off M. Wilson's account as uncollectible, $100
Recovered $25 from Jal
Aug. 19
Nov. 7
Part B
(10 points each for a possible total of 40 points)
For each of the following, identify in Column 1 the category to which the account
belongs, in Column 2 the normal balance for the account, in Column 3 the
financial statement that the account in which the account balance is reported,
and in Column 4 the account's nature (temporary/permanent).
COL
WORTE
SCIEN
(1)
Column 1
Column 2
Column 3
Column 4
Interest payable
(2)
Column 1
Column 2
Column 3
Column 4
Interest receivable
(3)
Column 1
Column 2
Column 3
Column 4
Discount on notes
payable
(4)
Column 1
Column 2
Column 3
Column 4
Store equipment
Part
(15 points each for a possible total of 30 points)
A computer server system, which had cost $210,000 and had accumulated
depreciation of $147,000, was traded for a new system with a fair market value
of $235,000. The old system and cash of $180,000 were given for the new system.
Prepare the journal entry for the exchange of these similar assets.
Prepare journal entries for the following for Bartz, Inc.
May 11 Replaced the engine in a Van #1, paying cash of $5,400
May 18 Paid cash for a tune-up of the engine in Van #2 of $570
May 29 Paid cash to add a lift to Van #2 of $3,700
Purchase answer to see full attachment
Purchase answer to see full attachment
User generated content is uploaded by users for the purposes of learning and should be used following Studypool's honor code & terms of service.
Explanation & Answer
Hello buddy, hope you are good...i have prepared you jour...
Completion Status:
100%
Review
Review
Anonymous
Awesome! Perfect study aid.
Studypool
4.7
Trustpilot
4.5
Sitejabber
4.4
24/7 Homework Help
Stuck on a homework question? Our verified tutors can answer all questions, from basic math to advanced rocket science!
Most Popular Content
Embry Riddle Aeronautical University Suppliers Outsourcing Case Study
Case Study OverviewSourcing of a new sub-componentYour company, based near Wilmington, N.C., needs to source a new sub-com ...
Embry Riddle Aeronautical University Suppliers Outsourcing Case Study
Case Study OverviewSourcing of a new sub-componentYour company, based near Wilmington, N.C., needs to source a new sub-component that will be a key element in a new product that is due to start production next year. Your boss contacted three producers of the sub-component and obtained the cost information below.Your boss has asked you to provide a detailed spreadsheet of the cost and provide a recommendation on which firm would be able to provide the sub-component at the best price. She needs to brief the CEO next week. Since your firm has worked with all three of the producers before, and all have a good record of providing sub-components, the decision will be solely based on the lowest cost.Additional Shipping Information10,000 units of the sub-component will fit into a 40-foot shipping container, so to keep the shipping cost down; all three firms will ship full containers each time an order is placed.Details on the Producer FirmsProducer AProducer A is located in Nashville, Tennessee, and can provide the sub-component for $3.25 each. The producer’s warehouse is 600 miles from your production facility, and truck transportation will cost $1.25 per mile. There is a container-handling fee of 1% of the total product cost that is assessed by the shipping company, as well as a required $200 insurance policy.Producer BProducer B is located in Europe and can provide the sub-component for $2.00 each. The producer’s warehouse is 100 KMs from the port and the truck transportation will be $1.50 per kilometers. The trucking cost from the United States port to your production facility is 35 miles and the transportation will cost $1.25/mile. From Europe to the United States, the sea shipping will run $2,000 with a handling fee of 1.25% of the total product cost. Since the sub-component must be imported into the United States, there is a 10% import duty assessed on the total cost of the product. Finally, there will be a fee of $850 for sea and surface transportation insurance.Producer CProducer C is located in Asia, the furthest away from your facility however; their cost per unit is the lowest at $1.50. The factory for Producer C is located 150 kilometers from the closest port and costs $0.20 per KM to move the container to the port. Sea shipping runs $2,500, with a handling cost of 1.25% of the total cost of the product. As with Producer B, once the container reaches the United States, it will be assessed import duties of 10%. Final transportation to your facility will run $43.75. Finally, there will be a fee of $900 for sea and surface transportation insurance.ConsiderationsAdditional information to ConsiderWhile both Producer B and C have a lower cost per unit, they have a higher shipping cost. Also, since both Producer B and C are so far away, and delivery time is uncertain, then your firm will want to hold $3,000 worth of safety stock. Finally, part of the reason that Producers B and C sub-components are cheaper is that some additional work will be needed on their components once they are received. Your production office has determined that it will cost $.50 each to finish off the sub-component for Production B and $1.10 each to finish the sub-component from Producer C.DeliverablesInclude the following in your submissionProvide a professional looking detailed spreadsheet with all of the costs outlined.Provide a professional looking (not APA formatted), one-page summary (double-spaced) of your findings that your boss can give to the CEO. In your initial task, you were told that the lowest cost would be the winner, but oftentimes the lowest price is not always the best solution. Therefore, in your memo, provide some information on sourcing that you would want your boss and the CEO to consider before making the final decision.
who can do my discussion board in government class?
The Texas legislature is a part-time, citizen legislature. It meets only once every two years for 140 days. Members of the ...
who can do my discussion board in government class?
The Texas legislature is a part-time, citizen legislature. It meets only once every two years for 140 days. Members of the Texas House are elected for two-year terms and are paid $7,200 per year.It is interesting to contrast the Texas legislature with a professional legislature, such as New York's. The New York legislature is considered professional because legislators are committed to being full-time representatives; they meet year-round, serve year-round and members are paid $79,500 per year.Former Governor Rick Perry campaigned for president on adapting the Texas model to the U.S. Congress. Perry argued that the Founders intended a "citizen" Congress similar to the one in Texas, with members serving for only a few terms and retaining their regular employment in the private sector. As far back as 2007, Perry remarked, "When you have a full-time legislature, they just feel pretty inclined to be doing something. So they are going to dream up new laws, new regulations and new statutes—and generally all of those cost money." This vision also fits with the principle of limited government—the principle that Congress or the legislature really should have a small role and the more they are in session, the more temptations they have to engage in corrupt practices and to pass laws restricting liberties.Opponents argue that the Texas model is not one that should be adopted for the U.S. Congress or other legislatures. Legislators are not any less prone to corruption under the Texas model. Under either model, lobbyists attempt to influence policy makers, and the fact that legislators have private-sector jobs does not minimize this possibility. Meeting once every two years reduces the time to deliberate and make sensible policies. In Texas, critics argue that the legislative session is rushed, and legislators rely too heavily on staff who work year-round and are more familiar with the ins and outs of policy making. Former Houston-area Congressman Chris Bell also warns that state legislators are more susceptible to corruption because "unless they're retired or independently wealthy, [legislators are] in a tough spot. There aren't a whole lot of jobs that lend themselves to a legislator's schedule, so those in office become prime targets [for lobbyists]." The rush of completing the legislation necessary to govern the state often leaves important issues unresolved, leading to the need for more special sessions. Members who are not independently wealthy are unable to legislate effectively because they cannot just leave their jobs for 140 days at a time every two years. All of these factors result in a less productive legislature.Each person's vision of the proper role of government will likely affect their feelings on this issue. Liberals, who prefer an active government, would probably prefer a full-time legislature that actively addresses social problems. Conservatives, who are not supporters of government activity in the economy, are more likely to support a minimal role for legislators so that citizens are free to make their own choices without governmental interference.What are your thoughts? Why should citizens care about this issue? Do you think the political process and policy outcomes might be influenced by the pay and frequency of sessions of the legislature?
13 pages
Facebook Financial Analysis
Facebook Inc. operates in a unique market compared to other firms. This move causes the company to suffer from the problem ...
Facebook Financial Analysis
Facebook Inc. operates in a unique market compared to other firms. This move causes the company to suffer from the problems that other businesses in ...
24 pages
Business Plan
Cheap Store is a retail store that is aimed at providing cheap bargains on clothes in the retail market. The merchandise w ...
Business Plan
Cheap Store is a retail store that is aimed at providing cheap bargains on clothes in the retail market. The merchandise will range from the ladies ...
11 pages
Diverse Group Cultural Competence
Robin Fritz (2015). Diversity for Groups & Teams in the Workplace. (WEB) Retrieved Rebecca A. Clay (2016). How do ...
Diverse Group Cultural Competence
Robin Fritz (2015). Diversity for Groups & Teams in the Workplace. (WEB) Retrieved Rebecca A. Clay (2016). How do I become culturally ...
Similar Content
MBA 705 Southern New Hampshire University Apple CO Financial Analysis and Funding Plan
...
University Of California Los Angeles Risk Management Process Essay
After appropriate research and analysis, write an essay on the risk management process we
have been studying so intensely....
case disscusion
Product Case: (no less than 500 words and provide reference in the end please)Jim Beers has been running his own busines...
University of Sydney Sales and Negotiation Case Study
3038MKT
Sales and Negotiation
WORKSHEET
FOR
Individual Case Study
Dr Park Thaichon
Department of Marketing
1
3038MKT ...
MG 495 Park University Societal Environments Discussion
Discuss how a development in a corporation’s natural and societal environments can affect the corporation through its ta...
Supply .edited
In this study, much focus is on the identification and application of fundamental economic ideas of logistics and supply c...
Hedging Rev
Exchange rates being the major threat in carrying out international business, many central banks apply different strategie...
Management Discussion4
In IT projects, many factors are necessary for the effective accomplishment of the project. The most critical success fact...
Related Tags
Book Guides
Gone with the Wind
by Margaret Mitchell
The Visible Filth
by Nathan Ballingrud
Fences
by August Wilson
The Scarlet Letter
by Nathaniel Hawthorne
Beowulf
by Anonymous Anglo-Saxon poet
The Splendid and The Vile
by Erik Larson
The 7 Habits of Highly Effective People
by Stephen R. Covey
Orphan Train
by Christina Baker Kline
Pachinko
by Min Jin Lee
Get 24/7
Homework help
Our tutors provide high quality explanations & answers.
Post question
Most Popular Content
Embry Riddle Aeronautical University Suppliers Outsourcing Case Study
Case Study OverviewSourcing of a new sub-componentYour company, based near Wilmington, N.C., needs to source a new sub-com ...
Embry Riddle Aeronautical University Suppliers Outsourcing Case Study
Case Study OverviewSourcing of a new sub-componentYour company, based near Wilmington, N.C., needs to source a new sub-component that will be a key element in a new product that is due to start production next year. Your boss contacted three producers of the sub-component and obtained the cost information below.Your boss has asked you to provide a detailed spreadsheet of the cost and provide a recommendation on which firm would be able to provide the sub-component at the best price. She needs to brief the CEO next week. Since your firm has worked with all three of the producers before, and all have a good record of providing sub-components, the decision will be solely based on the lowest cost.Additional Shipping Information10,000 units of the sub-component will fit into a 40-foot shipping container, so to keep the shipping cost down; all three firms will ship full containers each time an order is placed.Details on the Producer FirmsProducer AProducer A is located in Nashville, Tennessee, and can provide the sub-component for $3.25 each. The producer’s warehouse is 600 miles from your production facility, and truck transportation will cost $1.25 per mile. There is a container-handling fee of 1% of the total product cost that is assessed by the shipping company, as well as a required $200 insurance policy.Producer BProducer B is located in Europe and can provide the sub-component for $2.00 each. The producer’s warehouse is 100 KMs from the port and the truck transportation will be $1.50 per kilometers. The trucking cost from the United States port to your production facility is 35 miles and the transportation will cost $1.25/mile. From Europe to the United States, the sea shipping will run $2,000 with a handling fee of 1.25% of the total product cost. Since the sub-component must be imported into the United States, there is a 10% import duty assessed on the total cost of the product. Finally, there will be a fee of $850 for sea and surface transportation insurance.Producer CProducer C is located in Asia, the furthest away from your facility however; their cost per unit is the lowest at $1.50. The factory for Producer C is located 150 kilometers from the closest port and costs $0.20 per KM to move the container to the port. Sea shipping runs $2,500, with a handling cost of 1.25% of the total cost of the product. As with Producer B, once the container reaches the United States, it will be assessed import duties of 10%. Final transportation to your facility will run $43.75. Finally, there will be a fee of $900 for sea and surface transportation insurance.ConsiderationsAdditional information to ConsiderWhile both Producer B and C have a lower cost per unit, they have a higher shipping cost. Also, since both Producer B and C are so far away, and delivery time is uncertain, then your firm will want to hold $3,000 worth of safety stock. Finally, part of the reason that Producers B and C sub-components are cheaper is that some additional work will be needed on their components once they are received. Your production office has determined that it will cost $.50 each to finish off the sub-component for Production B and $1.10 each to finish the sub-component from Producer C.DeliverablesInclude the following in your submissionProvide a professional looking detailed spreadsheet with all of the costs outlined.Provide a professional looking (not APA formatted), one-page summary (double-spaced) of your findings that your boss can give to the CEO. In your initial task, you were told that the lowest cost would be the winner, but oftentimes the lowest price is not always the best solution. Therefore, in your memo, provide some information on sourcing that you would want your boss and the CEO to consider before making the final decision.
who can do my discussion board in government class?
The Texas legislature is a part-time, citizen legislature. It meets only once every two years for 140 days. Members of the ...
who can do my discussion board in government class?
The Texas legislature is a part-time, citizen legislature. It meets only once every two years for 140 days. Members of the Texas House are elected for two-year terms and are paid $7,200 per year.It is interesting to contrast the Texas legislature with a professional legislature, such as New York's. The New York legislature is considered professional because legislators are committed to being full-time representatives; they meet year-round, serve year-round and members are paid $79,500 per year.Former Governor Rick Perry campaigned for president on adapting the Texas model to the U.S. Congress. Perry argued that the Founders intended a "citizen" Congress similar to the one in Texas, with members serving for only a few terms and retaining their regular employment in the private sector. As far back as 2007, Perry remarked, "When you have a full-time legislature, they just feel pretty inclined to be doing something. So they are going to dream up new laws, new regulations and new statutes—and generally all of those cost money." This vision also fits with the principle of limited government—the principle that Congress or the legislature really should have a small role and the more they are in session, the more temptations they have to engage in corrupt practices and to pass laws restricting liberties.Opponents argue that the Texas model is not one that should be adopted for the U.S. Congress or other legislatures. Legislators are not any less prone to corruption under the Texas model. Under either model, lobbyists attempt to influence policy makers, and the fact that legislators have private-sector jobs does not minimize this possibility. Meeting once every two years reduces the time to deliberate and make sensible policies. In Texas, critics argue that the legislative session is rushed, and legislators rely too heavily on staff who work year-round and are more familiar with the ins and outs of policy making. Former Houston-area Congressman Chris Bell also warns that state legislators are more susceptible to corruption because "unless they're retired or independently wealthy, [legislators are] in a tough spot. There aren't a whole lot of jobs that lend themselves to a legislator's schedule, so those in office become prime targets [for lobbyists]." The rush of completing the legislation necessary to govern the state often leaves important issues unresolved, leading to the need for more special sessions. Members who are not independently wealthy are unable to legislate effectively because they cannot just leave their jobs for 140 days at a time every two years. All of these factors result in a less productive legislature.Each person's vision of the proper role of government will likely affect their feelings on this issue. Liberals, who prefer an active government, would probably prefer a full-time legislature that actively addresses social problems. Conservatives, who are not supporters of government activity in the economy, are more likely to support a minimal role for legislators so that citizens are free to make their own choices without governmental interference.What are your thoughts? Why should citizens care about this issue? Do you think the political process and policy outcomes might be influenced by the pay and frequency of sessions of the legislature?
13 pages
Facebook Financial Analysis
Facebook Inc. operates in a unique market compared to other firms. This move causes the company to suffer from the problem ...
Facebook Financial Analysis
Facebook Inc. operates in a unique market compared to other firms. This move causes the company to suffer from the problems that other businesses in ...
24 pages
Business Plan
Cheap Store is a retail store that is aimed at providing cheap bargains on clothes in the retail market. The merchandise w ...
Business Plan
Cheap Store is a retail store that is aimed at providing cheap bargains on clothes in the retail market. The merchandise will range from the ladies ...
11 pages
Diverse Group Cultural Competence
Robin Fritz (2015). Diversity for Groups & Teams in the Workplace. (WEB) Retrieved Rebecca A. Clay (2016). How do ...
Diverse Group Cultural Competence
Robin Fritz (2015). Diversity for Groups & Teams in the Workplace. (WEB) Retrieved Rebecca A. Clay (2016). How do I become culturally ...
Earn money selling
your Study Documents