- Fundamentals of Systems Design and Analysis –
Question Description
PART 1 . Using IDEF 0 methodology,, draw a complete model to specify an organization of your choice (iindustrial,, service,, or p ublic)) . This model should specify the organization down to its 2 nd level of decomposition (ii..ee..,, include function blocks at the Axx level)) , taking into c onsideration of all the aspects,, such as those identified in the FIVE categories in a typical industrial system..
Follow strictly the cross - checking steps to ensure the integrity of your model::
1.. Specify and Cross - Check a function block:: f or each of the Inputs,, cross - check for its related Output((ss));; for each of the Out put s , cross - che ck for its related Input((ss));; for each of the Mechani sm and Control,, check what it is used for..
2.. Decompose , if needed,, to 3 - 5 next level functions . For each of these sub - level functions::
Carry out the Specify and Cross - Check as outlined in (11))
Establish relationships amongst these functions through flow of Inputs,, Outputs,, Controls and Mechanisms
Cross - Check Integrity of Decomposition : lower - level definition should represent EX ACTLY its higher level function..
3.. Repeat step 2 until the required level of detail is reached..
You should provide a textual descrip tion of the overall system//oorganization of concern,, as well as for each of the function blocks presented in the model..
PART 2.. From your IDEF model of the organization,, pick up two related functions.. D raw an Activity - Cycle - Diagram to illustrate how the dy namic interaction takes place..
PART 3 . E xplain,, with flowchart if necessary,, how simulation process can be logically carried out to estimate the system performance in terms of average lead time,, and//oor average resources utilization.. Then,, for the ACD mod el of Part 2::
Assign time elements involved (ssuch the average and distribution times of arrival,, and machining//pprocess//sservice times))
Carry out a simulation,, physically,, and estimate the values related to system performance such as the mean throughput and /oor the average waiting times..
Length and Structure : No more than 20 pages ( 1.5 spacing and including figures)).. Please properly “ssection”” your report,, so that it follows the format of a (See File Attached)
Unformatted Attachment Preview
This question has not been answered.
Create a free account to get help with this and any other question!
Brown University
1271 Tutors
California Institute of Technology
2131 Tutors
Carnegie Mellon University
982 Tutors
Columbia University
1256 Tutors
Dartmouth University
2113 Tutors
Emory University
2279 Tutors
Harvard University
599 Tutors
Massachusetts Institute of Technology
2319 Tutors
New York University
1645 Tutors
Notre Dam University
1911 Tutors
Oklahoma University
2122 Tutors
Pennsylvania State University
932 Tutors
Princeton University
1211 Tutors
Stanford University
983 Tutors
University of California
1282 Tutors
Oxford University
123 Tutors
Yale University
2325 Tutors