# Tutorial question for various devices used in work holding

Apr 15th, 2015
Studypool Tutor
Massachusetts Institute of Technology
Price: \$5 USD

Tutor description

These are devices used to hold work pieces firmly in the machine for production purposes. The document has a wide range of tutorial questions.

Word Count: 465
Showing Page: 1/3
TUTORIAL EMG 2413 MACHINE DESIGN(a) State four uses of shaft couplings (b) State four requirements of a good shaft coupling (c) Briefly describe the classification of shaft couplings(d) A 15 kW, 960 r.p.m. motor has a mild steel shaft of 40 mm diameter and the extension being 75 mm. The permissible shear and crushing stresses for the mild steel key are 56 MPa and 112 MPa. Design the keyway in the motor shaft extension. Check the shear strength of the key against the normal strength of the shaft.(e) A steel spindle transmits 4 kW at 800 r.p.m. The angular deflection should not exceed 0.25 per meter of the spindle. If the modulus of rigidity for the material of the spindle is 84GPa, find the diameter of the spindle and the shear stress induced in the spindle.(f)

## Review from student

Studypool Student
" Goes above and beyond expectations ! "

1826 tutors are online

Brown University

1271 Tutors

California Institute of Technology

2131 Tutors

Carnegie Mellon University

982 Tutors

Columbia University

1256 Tutors

Dartmouth University

2113 Tutors

Emory University

2279 Tutors

Harvard University

599 Tutors

Massachusetts Institute of Technology

2319 Tutors

New York University

1645 Tutors

Notre Dam University

1911 Tutors

Oklahoma University

2122 Tutors

Pennsylvania State University

932 Tutors

Princeton University

1211 Tutors

Stanford University

983 Tutors

University of California

1282 Tutors

Oxford University

123 Tutors

Yale University

2325 Tutors